Skip to main content
Log in

The micromechanics of friction in a granular layer

  • Frictional Slip, Failure, and Deformation Mechanics: Laboratory Studies
  • Published:
pure and applied geophysics Aims and scope Submit manuscript

Abstract

A grain bridge model is used to provide a physical interpretation of the rate- and state-dependent friction parameters for the simple shear of a granular layer. This model differs from the simpler asperity model in that it recognizes the difference between the fracture of a grain and the fracture of an adhesion between grains, and it explicitly accounts for dilation in the granular layer. The model provides an explanation for the observed differences in the friction of granular layers deformed between rough surfaces and those deformed between smooth surfaces and for the evolution of the friction parameters with displacement. The observed evolution from velocity strengthening to velocity weakening with displacement is interpreted as being due to the change in the micromechanics of strain accommodation from grain crushing to slip between adjacent grains; this change is associated with the observed evolution of a fractal grain structure.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • An, L.-J., andSammis, C. G. (1993),Particle Size Distribution of Cataclastic Fault Materials from Southern California: A 3-D Study, Pure and Applied Geophysics, submitted.

  • Biegel, R. L., Sammis, C. G., andDieterich, J. H. (1989),The Frictional Properties of a Simulated Gouge Having a Fractal Particle Distribution, J. Structural Geol.11, 827–846.

    Google Scholar 

  • Bowden, F. P., andTabor, D.,The Friction and Lubrication of Solids, Part I. (Oxford: Clarendon Press 1950).

    Google Scholar 

  • Bowden, F. P., andTabor, D.,The Friction and Lubrication of Solids, Part II. (Oxford: Clarendon Press 1950).

    Google Scholar 

  • Brace, W. F., andMartin, R. J. (1968),A Test of the Law of Effective Stress for Crystalline Rocks of Low Porosity, Int. J. Rock Mech. Min. Sci.5, 415–426.

    Google Scholar 

  • Dieterich, J. H. (1972),Time-dependent Friction in Rocks, J. Geophys. Res.77, 3690–3697.

    Google Scholar 

  • Dieterich, J. H. (1978),Time-dependent Friction and the Mechanics of Stick-slip, Pure and Appl. Geophys.116, 790–806.

    Google Scholar 

  • Dieterich, J. H. (1979),Modeling of Rock Friction: 1. Experimental Results and Constitutive Equations, J. Geophys. Res.84, 2161–2168.

    Google Scholar 

  • Dieterich, J. H.,Constitutive properties of faults with simulated gouge. InMechanical Behavior of Crustal Rocks Geophys. Monogr. 24 (American Geophysical Union 1981) pp. 108–120.

  • Dieterich, J.,A model for the nucleation of earthquake slip. InEarthquake Source Mechanics. AGU Geophys. Mono. 37 (Washington, D.C., American Geophysical Union 1986) pp. 37–49.

    Google Scholar 

  • Dieterich, J. H. (1993),Direct Observation of Frictional Contacts: New Insights for Sliding Memory Effects, submitted to Science.

  • Gallagher, J. J., Friedman, M., Handin, J., andSowers, G. M. (1974),Experimental Studies Relating to Microfracture in Sandstone, Tectonophys.21, 203–247.

    Google Scholar 

  • Marone, C., andScholz, C. H. (1989),Particle-size Distribution and Microstructures within Simulated Fault Gouge, J. Struct. Geology.11, 799–814.

    Google Scholar 

  • Marone, C., Raleigh, C. B., andScholz, C. H. (1990),Frictional Behavior and Constitutive Modeling of Simulated Fault Gouge, J. Geophys. Res.95, 7007–7026.

    Google Scholar 

  • Marone, C., andKilgore, B. (1993),Scaling of the Critical Slip Distance for Seismic Faulting with Shear Strain in Fault Zones, Nature362, 618–621.

    Google Scholar 

  • Marone, C., andCox, S. J. D. (1994),Scaling in Rock Friction Laws: The Effects of Surface Roughness and Cumulative Offset on Friction of Gabbro, Pure and Appl. Geophys., this volume.

  • Mandl, G., Dejong, L. N. J., andMaltha, A. (1977),Shear Zones in Granular Material: An Experimental Study of their Structure and Mechanical Genesis, Rock Mechanics9, 95–144.

    Google Scholar 

  • Morrow, C. A., andByerlee, J. D. (1989),Experimental Studies of Compaction and Dilatancy During Frictional Sliding on Faults Containing Gouge, J. Struct. Geol.11, 815–825.

    Google Scholar 

  • Okubo, P. G., andDieterich, H. H. (1984),Effects of Physical Fault Properties on Frictional Instabilities Produced on Simulated Faults, J. Geophys. Res.89, 5817–5827.

    Google Scholar 

  • Paterson, M. S.,Experimental Rock Deformation—The Brittle Field (Springer-Verlag, N. Y. 1978).

    Google Scholar 

  • Ruina, A. L. (1983),Slip Instability and State Variable Friction Laws, J. Geophys. Res.88, 10359–10370.

    Google Scholar 

  • Sammis, C. G., King, G., andBiegel, R. L. (1987),The Kinematics of Gouge Deformation, Pure and Appl., Geophys.125, 777–812.

    Google Scholar 

  • Steacy, S. J., andSammis, C. G. (1991),An Automaton for Fractal Patterns of Fragmentation, Nature353, 250–252.

    Google Scholar 

  • Tullis, T. E., andWeeks, J. D. (1986),Constitutive Behavior and Stability of Frictional Sliding of Granite, Pure and Applied Geophys.124, 383–414.

    Google Scholar 

  • Tullis, T. E., andWeeks, J. D. (1987),Micromechanics of Frictional Resistance of Calcite, Trans. Am. Geophys. Union65, 405.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Sammis, C.G., Steacy, S.J. The micromechanics of friction in a granular layer. PAGEOPH 142, 777–794 (1994). https://doi.org/10.1007/BF00876064

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00876064

Key words

Navigation