Abstract
Spatial sensitometry variations in a liquid crystal light valve are studied as well as signal induced noise and differences in global and local contrast ratio. The device's off state is investigated and spatial variations in the thickness of the LC layer are used to quantify the results obtained. Operation with low frequency applied ac voltages appears preferable from noise considerations, whereas operation at high frequency appears preferable for improved uniformity.
Similar content being viewed by others
References
W.Blehaet al.: Opt. Eng.17, 371–384 (1978)
J.Grinberget al.: Opt. Eng.14, 217–225 (1975)
D.Casasent. Proc. IEEE65, 143–157 (1977)
M.Born, E.Wolf: InPrinciples of Optics, 2nd ed. Pergamon Press, New York 1970)
J.Grinberg et al.: IEEE ED-22, 775–783 (1976)
L.M.Fraas et al.: J. Appl. Phys.47, 576–583 (1976)
L.M.Fraas et al.: J. Appl. Phys.47, 584–590 (1976)
D.Casasent, S.Natu: Opt. Commun. (submitted)
D.Casasent: Appl. Opt.18, 2445 (1979)
J.Grinberg, A.Jacobson. J. Opt. Soc. Am.66, 1003–1009 (1976)
P.McIntyre, A.Snyder: J. Opt. Soc. Am.68, 149–157 (1978)
J.Bigelow, R.Kashnow: Appl. Opt.16, 2090–2096 (1979)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Casasent, D., Natu, S. Spatial variations in a hybrid field-effect liquid crystal light valve. Appl. Phys. 20, 171–174 (1979). https://doi.org/10.1007/BF00885940
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00885940