References
Agterberg, E. P. (1976): Geomathematics, Elsevier, New York.
Ambarcumjan, R. V. (1974): Convex Polygons and Random Tessellations. In: Harding, E. F., Kendall, D. G. (eds.), Stochastic Geometry, Johan Wiley & Sons, New York, 176–191.
Baecher, G. B., Lanney, N. A., (1978): Trace Length Biases in Joint Surveys. Proceedings of the 19th U. S. Symposium on Rock Mechanics, Vol. 1, 56–65.
Baecher, G. B., Lanney, N. A., Einstein, H. H. (1977): Statistical Description of Rock Properties and Sampling. Proceedings of the 18th U. S. Symposium on Rock Mechanics, 5C1-8.
Bankwitz, P. (1966): Über die Klüfte II. Geologie15, 896–941.
Barton, C. C. (1983): Systematic Jointing in the Cardium Sandstone along the Bow River. Alberta, Canada, Ph. D. Thesis, Yale.
Barton, C. C. (1986): Personal Communication on Aperture Measurements Performed at Yucca Mountain.
Barton, C. M. (1978): Analysis of Joint Traces. Proceedings of the 19th U.S. Symposium on Rock Mechanics, American Institute of Mining Engineers, 39–40.
Billings, M. (1972): Structural Geology. Prentice Hall, Englewood Cliffs, New Jersey.
Bingham, C. (1964): Distribution on the Sphere and on the Projective Plane. Ph. D. Dissertation, Yale University, New Haven.
Brace, W. F., Bombolakis, E. Z. (1963): Crack Growth in Compression. J. of Geophysical Research, Vol. 68.
Bridges, M. C. (1976): Presentation of Fracture Data for Rock Mechanics. Proceedings 2nd Australian-New Zealand Conference on Geomechanics, Brisbane, 144–148.
Call, R. D., Savely, J., Nicholas, D. E. (1976): Estimation of Joint Set Characteristics from Surface Mapping Data. Proceedings 17th U. S. Symposium on Rock Mechanics, 2B2-1–2B2-9.
Childs, E. C. (1957): The Anisotropic Hydraulic Conductivity of Soil. J. of Soil Science8 (no.1), 42–47.
Cleary, M. P. (1984): Internal Progress Report on Joint Industry Research, MIT.
Cloos, H. (1936): Einführung in die Geologie, Borntraeger, Berlin.
De Sitter, L. U. (1956): Structural Geology, Second Edition, McGraw-Hill, New York.
Dershowitz, W. S. (1979): A Probabilistic Model for the Deformability of Jointed Rock Masses. M. S. Thesis, Massachusetts Institute of Technology, Cambridge, Massachusetts.
Dershowitz, W. S. (1984): Rock Joint System. Ph. D. Thesis, Massachusetts Institute of Technology, Cambridge, Massachusetts.
Einstein, H. H., Baecher, G. B., Veneziano, D. et al. (1980): Risk Analysis for Rock Slopes in Open Pit Mines — Final Technical Report. Publication No. R80-17, Order No. 669, Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts.
Einstein, H. H Hirschfeld, R. C. (1973): Model Studies on Mechanisms of Jointed Rock, ASCE Journal of the Geotech. Division, Vol. 99, SM3.
Einstein, H. H., Veneziano, D., Baecher, G. B., O'Reilly, K. J. (1983a). The Effect of Discontinuity Persistence on Rock Slope Stability. Int. J. Rock Mechanics and Mining Sciences20, (no. 5), 227–236.
Einstein, H. H., Baecher, G. B. (1983b): Probabilistic and Statistical Methods in Engineering Geology. Rock Mechanics and Rock Engineering16 (no. 1), 39–72.
Fisher, R. A. (1953): Dispersion on a Sphere. Proceedings, Roy. Soc. of London, Series A, Vol. 217, 295–305.
Golder Assoc. (1986): Fracture Flow and Solute Transport Modeling. Project Technical Report to Battelle-OCRD.
Grossman, N. F. (1985a): The Bivariate Normal Distribution on the Tangent Plane at the Mean Attitude, Proc. Int. Symp on Fundamentals of Rock Joints, 71–75.
Grossman, N. F. (1985b): Personal Communication on Aperture Measurements Performed by LNEC.
Herda, H., Einstein, H. H. (in preparation): Pole Distribution of Strata with Variously Inclined Dips.
Hodgson, R. A. (1961): Regional Study of Jointing in Comb Ridge-Navajo Mountain Area, Arizona and Utah. Bulletin of the American Association of Petroleum Geologists45 (no. 1), 1–38.
Hudson, J. A., Priest, S. D. (1979): Discontinuities and Rock Mass Geometry. Int. J. of Rock Mechanics and Mining Sciences16 (o. 6), 339–362.
Hudson, J. A., Priest, S. D. (1983): Discontinuity Frequency in Rock Masses. Int. J. of Rock Mechanics and Mining Sciences20, (no. 2), 73–90.
International Society for Rock Mechanics, Commission on Standardization of Laboratory and Field Tests (1978): Suggested Methods for the Quantitative Description of Discontinuities in Rock Masses. Int. J. of Rock Mechanics and Mining Sciences15, 319–368.
Irmay, S. (1955): Flow of Liquids Through Cracked Media. Bull. Water Resources Council, Israel5A (no. 1), 84.
Jaeger, J. C., Cook, N. G. W. (1979): Fundamentals of Rock Mechanics. London, Chapman and Hall.
Koch, R. A. (1974): Zur Frage der Quantitativen Klufterfassung von säulig abgesondertem Eruptivgestein (Nepelinbasalt von Stolpen), Abhandlungen des Staatlichen Museums für Mineralogie und Geologie (Dresden), V. 21, 1–37.
Kohlbeck, F. (1985): Density Estimation in the Sphere Suitable for Application to Rock Joints. Proc. Int. Symp. on Fundamentals of Rock Joints, 71–75.
Kulander, B. R., Barton, C. C., Dean S. L. (1979): The Application of Fractography to Core and Outcrop Fracture Investigations, U. S. Dept. of Energy Report METC/SP-79/3, Morgantown Energy Research Center, pp. 174.
LaPointe, P. R. (1980): Analysis of the Spatial Variation in Rock Mass Properties Through Geostatistics. Proceedings, 21st U.S. Symposium on Rock Mechanics.
Long, J. C. S. (1983): Investigation of Equivalent Porous Medium Permeability in Networks of Discontinuous Fractures. Ph. D. Dissertation, Earth Sciences Division, Lawrence Berkeley Laboratory, University of California, Berkeley.
Long, J. C. S. (1985): A Model for Steady Fluid Flow in Random Three-Dimensional Networks of Disk Shaped Fractures. Water Resources Research21 (no. 8), 1105–1115.
Mardia, K. V. (1972): Statistics of Directional Data. Academic Press, New York
Matheron, G. (1975): Random Sets and Integral Geometry. John W. Wiley & Sons, Inc., New York.
McMahon, B. (1971): A Statistical Method for the Design of Rock Slopes. Proceedings 1st Australia-New Zealand Conference on Geomechanics, 314–321.
Miles, R. E. (1971): Poisson Flats in Euclidean Spaces, Pt. 11: Homogeneous Poisson Flats and the Complementary Theorem. Advances in Applied Probability3, 1–43.
Miller, S. M. (1979): Determination of Spatial Variation in Fracture Set Characteristics by Geostatistical Methods. M. Sc. Thesis, University of Arizona, Tucson.
Müller, L. (1933): Untersuchungen über statistische Kluftmessung. Geologie und Bauwesen5, 185.
Müller, L. (1963): Der Felsbau, Ferdinand Enke, Stuttgart.
Nemat-Nasser, S., Horii, H., (1982): Compression-Induced Nonplanar Crack Extension with Application to Splitiing, Exfoliation, and Rockburst, J. Geophysical Research87 (no. B8), 6805–6821.
Priest, S. D., Hudson, J. (1976): Discontinuity Spacings in Rock. Int. J. Rock Mechanics and Mining Sciences13, 135–148.
Priest, S. D., Hudson, J. (1981): Estimation of Discontinuity Spacing and Trace Length Using Scanline Surveys. Int. J. Rock Mechanics and Mining Sciences18, 183–197.
Riedel, W. (1929): Zur Mechanik Geologischer Brucherscheinungen. Centralblatt für Mineralogie, Geologie.
Roberds, W. (1979): Numerical Modelling of Rock Joints. Sc. D. Thesis, M.I.T.
Robertson, A. (1970): The Interpretation of Geological Factors for Use in Slope Stability. Proceedings, Symposium on the Theoretical Background to the Planning of Open Pit Mines with Special Reference to Slope Stability, 55–71.
Santalo, L. A. (1976): Stochastic Geometry and Integral Calculus. Addison-Wesley Publishing Company, Reading, Massachusetts.
Schmidt W. (1932): Tektonik und Verformungslehre. Borntraeger, Berlin.
Schwartz, F. W., Smith, L., Crowe, A. S. (1983): A Stochastic Analysis of Macroscopic Dispersion in Fractured Media. Water Resources Research 19, No. 5, 1253–1265.
Segall, P., Pollard, D. D. (1983): Joint Formation in Granitic Rock of the Sierra Nevada. Geological Society of America Bulletin,94, 563–575.
Serra, J. (1982): Image Analysis and Mathematical Morphology, Academic Press, New York.
Snow, D. T. (1965): A Parallel Plate Model of Fractured Permeable Media. Ph. D. Dissertation, University of California, Berkeley.
Snow, D. T. (1968): Anisotropic Permeability of Fractured Rocks. In: R. J. M. DeWiest (ed.) Hydrology and Flow Through Porous Media, Academic Press, New York.
Steffen, O. K. H., Jennings, J. E. (1975): Recent Developments in the Interpretation of Data from Joint Surveys in Rock Masses. Proc. 6th Regional Conference for Africa on Soil Mechanics and Foundation Engineering11, 17–26.
Stini J. (1925): Die Ausführung der Kluftmessung. Der Geologe, Nr. 38.
Stoyan, D., Kendall, W. S., Mecke, J. (1987): Stochastic geometry and its applications. Wiley: Chichester and N. Y. C.
Stoyan, D., Stoyan, H. (1980): Gedanken zur Entstehung der Säulenformen bei Basalten. Zeitschrift für geologische Wissenschaften (Berlin), V. 12, 1529–1537.
Swan, S. (1981): Tribology and Characterization of Rock Joints. Proc. 22nd U. S. Symp. in Rock Mechanics, 402–407.
Veneziano, D. (1978): Probabilistic Model of Joints in Rock. Umpublished manuscript, Massachusetts Institute of Technology, Cambridge, Massachusetts.
Warburton, P. M. (1980a): A Stereological Interpretation of Joint Trace Data. International Journal of Rock Mechanics and Mining Sciences, Vol. 17, pp. 181–190.
Warburton, P. M. (1980b): Stereological Interpretation of Joint Trace Data: Influence of Joint Shape and Implications for Geological Surveys. International Journal of Rock Mechanics and Mining Sciences, Vol. 17, pp. 305–316.
Weiss, L. E. (1972): The Minor Structures of Deformed Rocks. A Photographic Atlas. Springer-Verlag, New York.
Wilson, G. (1982): Introduction to Small-Scale Geological Structures, George Allen and Unwin, Boston, 1982.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dershowitz, W.S., Einstein, H.H. Characterizing rock joint geometry with joint system models. Rock Mech Rock Engng 21, 21–51 (1988). https://doi.org/10.1007/BF01019674
Issue Date:
DOI: https://doi.org/10.1007/BF01019674