Abstract
The oxidation behavior of Inconel 625 during the early stages (<150 min) has been studied at oxygen pressures (PO 2) of 0.12 kPa (0.9 torr) and 101.3 kPa (760 torr) in the temperature range of 1323 K to 1523 K by using TGA and between 873 and 1523 K by using XPS, AES, and EDS. The TGA results correlated well with those obtained by surface analysis of the oxide films. The results of XPS and AES analysis suggested that two distinctly different oxidation mechanisms operate, depending on the temperature of oxidation. Enrichment of the oxide films with respect to Cr2O3 occurs above 873 K, the degree of enrichment peaking at about 1200 K such that the oxide films formed at temperatures close to this consist almost exclusively of Cr2O3. At temperatures above 1300 K, the oxides of two minor alloying components, Nb and Ti, have been found to be present in the oxide films in significant proportions. The results have been discussed on the basis of the relative thermodynamic stabilities of the competing oxide phases and the diffusivities of the alloying elements in Inconel 625.
Similar content being viewed by others
References
Technology Forecast,Met. Progr. Jan., 44 (1981).
D. E. Wenschoff, Technical Service Memorandum, Huntington Alloy Products Division, The International Nickel Co., Huntington, West Virginia, 1974.
G. E. Wasielewski and R. A. Rapp, inThe Superalloys, C. T. Sims and W. C. Hagel, eds. (Wiley, New York, 1972), p. 287.
G. C. Wood,Oxid. Met. 2, 11 (1970).
K. N. Strafford, inConf. Proc. on High Temperature Alloys: Their Exploitable Potentials, J. B. Marriott, M. Merz, J. Nihoul, and J. Ward, eds. (Elsevier Applied Sci., Amsterdam, 1985), p. 53.
S. R. Smith, W. J. Carter III, G. D. Mateescu, F. J. Kohlm, G. C. Fryburg, and C. A. Stearns,Oxid. Met. 14, 415 (1980).
S. R. J. Saunders,Sci. Prog. Oxf. 63, 163 (1976).
N. Hussain, K. A. Shahid, I. H. Khan, and S. Rahman,Oxid. Met. 41, 251 (1994).
B. Pieraggi and R. A. Rapp,J. Electrochem. Soc. 140, 2844 (1993).
R. D. K. Mishra and R. Sivakumar,Oxid. Met. 25, 83 (1986).
Y. Saito, T. Inoue, T. Moruyama, and T. Amano,Boshoku Gijutsu 31, 109 (1982).
T. Walec,mater. Sci. Monogr. 10, 284 (1982).
G. Baran and A. R. McGhie, inInt. Conf. on Thermal Analysis, vol. 1, B. Miller, ed. (Wiley, Chichester, UK, 1982), p. 120.
F. H. Stott,Mater. Charact. 28, 311 (1992).
A. Strawbridge, F. H. Stott, and G. C. Wood,Corros. Sci. 35, 855 (1993).
A. S. Khanna, W. J. Quadakkers, X. Yang, and H. Schuster,Oxid. Met. 40, 275 (1993).
Y. Zhang and D. A. Shores,Oxid. Met. 40, 529 (1993).
P. Elliot and A. F. Hampton,Oxid. Met. 14, 449 (1980).
T. Amano and T. Taguchi,J. Alloys Compd. 193, 20 (1993).
F. Abe, H. Avaki, H. Yoshida, and M. Okada,Oxid. Met. 27, 21 (1987).
M. Durasso and R. L. Ramanathan,Congr. Anu. ABM 36, 353 (1981).
N. Hussain, G. Schanz, S. Leistikow, and K. A. Shahid,Oxid. Met. 32, 405 (1989).
H. J. Christ, L. Berchtold, and H. G. Sockel,Oxid. Met. 26, 45 (1986).
C. S. Giggins and F. S. Pettit,Trans. Metall., Soc. AIME 245, 2495 (1969).
S. Chattopadhyay and G. C. Wood,J. Electrochem. Soc. 117, 1176 (1970).
R. P. Abendroth,Met. Trans. 230, 1735 (1964).
N. S. McIntyre and D. G. Zetaruk,J. Vacuum Sci. Technol. 14, 181 (1977).
N. S. McIntyre, D. G. Zetaruk, and D. Owen,Appl. Surface Sci. 2, 55 (1978).
J. C. Langevoort, I. Sutherland, L. J. Hanckamp, and P. J. Gellings,Appl. Surface Sci. 28, 167 (1987).
K. S. Kim, W. E. Baitinger, J. W. Amy, and N. Winograd,J. Electron Spectrosc. Rel. Phenom. 5, 351 (1974).
M. Lenglet, R. Guillamet, J. Lopitaux, and B. Hannoyer,Mater. Res. Bull. 25, 715 (1990).
C. S. Tedmon, Jr.,J. Electrochem. Soc. 113, 766 (1966).
C. A. Stearns, F. J. Kohl, and G. C. Fryburg,J. Electrochem. Soc. 121, 945 (1974).
H. C. Graham and H. H. Davis,J. Am. Ceram. Soc. 54, 89 (1971).
L. B. Pankratz, J. M. Stuve and N. A. Gokcen,Thermodynamic Data for Mineral Technology (U.S. Bureau of Mines, Bull. No. 677, 1984).
C. D. Wagner, M. M. Riggs, L. E. Davis, J. F. Moulder, and G. E. Muilenberg (eds.),Handbook of X-Ray Photoelectron Spectroscopy (Perkin-Elmer Corporation, Minnesota, 1979).
K. S. Kim and R. E. Davis,J. Electron Spectrosc. Rel. Phenom. 1, 251 (1972).
C. Wagner,J. Electrochem. Soc. 113, 1245 (1952).
T. F. Chen, Y. Iijima, K. Hirano, and K. Yamauchi,J. Nucl. Mater. 169, 285 (1989).
J. B. Malherbe, S. Hofmann, and J. M. Sanz,Appl. Surface Sci. 27, 355 (1986).
C. Wagner,J. Electrochem. Soc. 99, 369 (1952).
R. V. Patil, K. Bhanumoorthy, and G. B. Kale, inProc. Int. Conf. Physical Metallurgy, Bombay, 1994, to be published.
M. Sundararaman and P. Mukhopadhyay,Met. Mater. Proces. 3, 1 (1991).
G. Ben Abderrazik, G. Moulin, and A. M. Huntz,Oxid. Met. 33, 191 (1990).
R. E. Lobnig, H. P. Schmidt, K. Hennesen, and H. J. Grabke,Oxid. Met. 37, 81 (1992).
W. C. Hagel and A. U. Seybolt,J. Electrochem. Soc. 108, 1146 (1961).
T. A. Ramanarayanan and R. Petkovic-Luton,Ber. Bunsen-Ges. Phys. Chem. 89, 402 (1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kumar, L., Venkataramani, R., Sundararaman, M. et al. Studies on the oxidation behavior of Inconel 625 between 873 and 1523 K. Oxid Met 45, 221–244 (1996). https://doi.org/10.1007/BF01046827
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01046827