Summary
We propose a new large deformation viscoplastic model which includes the effects of static and dynamic recovery in its strain rate response as well as the plastic spin in its rotational response. The model is directly obtained from single slip dislocation considerations with the aid of a maximization procedure and a scale invariance argument. It turns out that the evolution of the back stress and the expression for the plastic spin are coupled within the structure of the theory. The model is used for the prediction of nonstandard effects in torsion, namely the development of axial stress and strain as well as the directional softening of the shear stress. The comparisons between the present continuum model and both experiments and self-consistent polycrystalline calculations are very encouraging.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Bammann, D. J.: An internal variable model of viscoplasticity. In: Media with microstructures and wave progagation (Aifantis, E. C., Davison, L., eds.), p. 1041. Int. J. Engng. Sci. Vol. 8–10, Pergamon Press 1984.
Bammann, D. J.: An internal variable model of elastic-viscoplasticity. In: The mechanics of dislocations (Aifantis, E. C., Hirth, J. P., eds.), p. 203. American Society of Metals, Metals Park 1985.
Aifantis, E. C.: The physics of plastic deformation. Int. J. Plasticity3, 211 (1987).
Bammann, D. J., Aifantis, E. C.: On a proposal for a continuum with microstructure. Acta Mechanica45, 91 (1982).
Aifantis, E. C.: On the microstructural origin of certain inelastic models. Trans. ASME, J. Eng. Mat. Tech.106, 326 (1984).
Aifantis, E. C.: Continuum models for dislocated states and media with microstructures. In: The mechanics of dislocations (Aifantis, E. C., Hirth, J. P., eds.), p. 127. American Society of Metals, Metals Park 1985.
Aifantis, E. C.: On the structure of single slip and its implications to inelasticity. In: Physical basis and modelling of finite deformations of aggregates (Gittus, J., Nemat-Nasser, S., Zarka, J., eds.), p. 283. Proc. of an International Symposium—Jean Mandel in Memoriam (Sept. 30–Oct. 2, 1985, Paris, France), Elsevier Appl. Sci. Publi. 1986.
Dafalias, Y. F.: The plastic spin concept and a simple illustration of its role in finite plastic transformations. Mechanics of Materials3, 223 (1984).
Loret, B.: On the effects of plastic rotation in the finite deformation of anisotropic elastoplastic materials. Mechanics of Materials2, 287 (1983).
Onat, E. T.: Flow of kinematically hardening rigid-plastic material. In: Mechanics of materials behavior—Daniel C. Drucker anniversary volume (Dvorak, G. J., Shield, R. T., eds.), p. 311. Elsevier Sci. Publi. 1984.
Bammann, D. J., Johnson, G. C.: Development of a strain rate sensitive plasticity model. In: Engineering mechanics in civil engineering (Boresi, A. P., Chong, K. P., eds.), p. 454. 1984.
Bammann, D. J., Johnson, G. C.: On the kinematics of finite-deformation plasticity. Acta Mechanica (in press).
Asaro, R. J., Needleman, A.: Texture development and strain hardening in rate dependent polycrystals. Acta Metall33, 923 (1985).
Taylor, G. I.: Inhomogeneity of plastic deformation. J. Inst. Metals62, 307 (1983).
Sachs, G.: Progress in materials science. Z. Verein Deut. Ing.72, 734.
Bishop, J. F. W., Hill, R.: Inhomogeneity of plastic deformation. Phil Mag42, 414; 1298 (1951).
Asaro, R. J., Lowe, T. C.: Crystal plasticity analysis of large-strain shear. Sand 85–8245, 1985.
Gibeling, J. C., Nix, W. D.: A numerical study of long range internal stresses associated with subgrain boundaries. Acta Metall28, 1743 (1980).
Argon, A. S., Takeuchi, S.: Internal stresses in power-law creep. Acta Metall29, 1877 (1981).
Zbib, H. M., Aifantis, E. C.: Constitutive relations for large material rotations. In: Constitutive laws for engineering materials: theory and application (Desai, C. S., et al., eds.), p. 1411. Elsevier Sci. Publ. 1987.
Zbib, H. M., Aifantis, E. C.: The concept of relative spin and its implications to large deformation theories. MM Report No. 13, Michigan Technological University, Houghton, Michigan 1987.
Mandel, J.: Sur la definition de la vitesse de deformation elastique et sa relation avec la vitesse de constrainte. Int. J. Solids Struct.17, 873 (1981).
Dafalias, Y. F., Aifantis, E. C.: On the microscopic origin of plastic spin. MM Report No. 9, Michigan Technological University, Houghton, Michigan 1984.
Nagtegaal, J. C., de Jong, J. E.: Some aspects of work hardening in finite strain plasticity. In: Plasticity of metals at finite strain: theory and computation (Lee, E. H., et al., eds.), p. 65. Palo Alto: Quicksilver Printing 1982.
Stout, M. G.: Los Alamos National Laboratory (unpublished data).
Author information
Authors and Affiliations
Additional information
With 9 Figures
Rights and permissions
About this article
Cite this article
Bammann, D.J., Aifantis, E.C. A model for finite-deformation plasticity. Acta Mechanica 69, 97–117 (1987). https://doi.org/10.1007/BF01175716
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01175716