Summary
With the von Mises yield criterion as basis, a generalised isotropic yield function for incompressible yielding has been formulated. The proposed yield function includes as limiting forms, both the classical yield criterion of Tresca and that of von Mises. It is shown that the general yield criterion includes a twelve-sided, piece-wise linear condition of yielding. A method of relaxing the restrictions imposed by the vertices associated with a piece-wise yield criteria is described. The formulation of a composite yield condition, comprising a piece-wise, linear and continuous, yield function, together with a continuously differentiable form of yield function, is described. The use of the proposed yield criterion is reviewed in the context of the two different ypes of experiment for determining the yield condition satisfied by a given material.
Similar content being viewed by others
References
von Mises, R.: Mechanik der festen Körper in plastisch deformablem Zustand. Göttinger Nachrichten. Math.-Phys. Klasse pp. 582–592, 1913.
von Mises, R.: Mechanik der plastischen Formänderung von Kristallen. Z. angew. Math. Mech.8, 161–185 (1928).
Prager, W.: Strain hardening under combined stresses. J. Appl. Phys.16, 837–840 (1945).
Drucker, D. C.: Relation of experiments to mathematical theories of plasticity. J. Appl. Mech.16, 349–357 (1949).
Freudenthal, A. M., Gou, P. F.: Second order effects in the theory of plasticity. Acta Mechan.8, 34–52 (1969).
Taylor, G. I., Quinney, H.: The plastic distortion of metals. Phil. Trans. R. Soc. Lond.A230, 323–362 (1931).
Billington, E. W.: The Poynting-Swift effect in relation to initial and post-yield deformation. Int. J. Solids Struct.21, 355–371 (1985).
Fromm, H.: Stoffgesetze des isotropen Kontinuums, insbesondere bei zähplastischem Verhalten. Ing.-Arch.4, 432–466 (1933).
Lode, W.: Versuche über den Einfluß der mittleren Hauptspannung auf das Fließen der Metalle Eisen, Kupfer und Nickel. Z. Phys.36, 913–939 (1926).
Haigh, B. P.: Elastic limit of a ductile metal. Engineering109, 158–160 (1920).
Westergaard, H. M.: On the resistence of ductile materials to combined stresses. J. Franklin Inst.189, 627–640 (1920).
Westergaard, H. M.: Theory of elasticity and plasticity. Cambridge, Mass.: Harvard University Press 1952.
Reuss, A.: Berücksichtigung der elastischen Formänderungen in der Plastizitätstheorie. Z. Angew. Math. Mech.10, 266–274 (1930).
Billington, E. W.: Non-linear mechanical response of various metals: VI. Piece-wise continuous yield condition. J. Phys. D: Appl. Phys.14, 1071–1085 (1981).
Hill, R.: On discontinuous plastic states, with special reference to localized necking in thin sheets. J. Mech. Phys. Solids1, 19–30 (1952).
Hill, R.: A new method for determining the yield criterion and plastic potential of ductile metals. J. Mech. Phys. Solids1, 271–276 (1953).
Lianis, G., Ford, H.: An experimental investigation of the yield criterion and the stress-strain law. J. Mech. Phys. Solids5, 215–222 (1957).
Poynting, J. H.: On pressure perpendicular to the shear planes in finite pure shears, and on the lengthening of loaded wires when twisted. Proc. R. Soc. Lond.A82, 546–559 (1909).
Poynting, J. H.: On the changes in the dimensions of a steel wire when twisted, and on the pressure of distortional waves in steel. Proc. R. Soc. Lond.A 86, 534–561 (1912).
Rose, W., Stüwe, H.-P.: Der Einfluß der Textur auf die Längenänderung im Torsionsversuch. Z. Metallkunde59, 396–399 (1968)
Author information
Authors and Affiliations
Additional information
With 5 Figures
Rights and permissions
About this article
Cite this article
Billington, E.W. Generalized isotropic yield criterion for incompressible materials. Acta Mechanica 72, 1–20 (1988). https://doi.org/10.1007/BF01176540
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01176540