Abstract
A comprehensive method for measuring the systematic errors of CNC-machine tools has been studied. The method used for measurement and calibration of machine tool errors should be general and efficient. The objectives of this study include:
-
1.
Volumetric error modelling.
-
2.
Experimental procedure for error measurement.
-
3.
A tool position and path compensation method.
-
4.
The verification method.
Using the same method, the machine tool status can be completely identified and its accuracy can be enhanced by software error compensation. The point compensation method can be used as a means for modifying the nominal tool path and on-the-machine inspection where the machine tool is used as a coordinate measuring machine. The validity of the error calibration method proposed in this paper was shown using a vertical 3-axis CNC machine with a laser interferometer and a ball bar technique.
Similar content being viewed by others
References
E. S. Lee, J. H. Park, J. H. Yang and S. H. Cho, “Volumetric error compensation of a coordinate measuring machine using a software method”, KSPE,11 (4), 1994.
J. Mou and C. Richard Liu, “A method for enhancing the accuracy of CNC machine tools for on-machine inspection”,Journal of Manufacturing Systems,11 (4), pp. 229–237, 1995.
V. B. Kreng, C. R. Liu and C. N. Chu, “A kinematic model for machine tool accuracy characterization”,International Journal of Advanced Manufacturing Technology,9, pp. 79–86. 1994.
M. A. Donmez, D. S. Blomquist, R. J. Hocken, C. R. Liu and M. M. Barash, “A general method for machine tool accuracy enhancement by error compensation”,Precision Engineering,8 (4), pp. 187–195, October 1986.
J. H. Cho and M. W. Cho, “Volumetric error analysis of a multi-axis machine tool machining a sculptured surface workpiece”,International Journal of Production Research,32 (2), pp. 345–363, 1994.
K. C. Fan, J. F. Lin and S. S. Lu, “Measurement and compensation of thermal error on a machining center”, Department of Mechanical Engineering, National Taiwan University, pp. 261–268, 1995.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, ES., Suh, SH. & Shon, JW. A comprehensive method for calibration of volumetric positioning accuracy of CNC-machines. Int J Adv Manuf Technol 14, 43–49 (1998). https://doi.org/10.1007/BF01179416
Issue Date:
DOI: https://doi.org/10.1007/BF01179416