Abstract
For a linearly elastic fiber reinforced composite disk, the first variation of an arbitrary stress, strain and displacement functional corresponding to variation of material parameters is derived by using the direct and adjoint approaches to sensitivity analysis. The results are particularized to the case of total potential and complementary energies. The relevant optimality conditions for optimal design and identification problems are then derived.
Similar content being viewed by others
References
Bojczuk, D. 1992: Optimization of fiber orientation in composites — optimality conditions for selected problems.Proc. IUTAM Symp. on Optimal Design with advanced Materials (held in Lyngby, Denmark)
Dems, K.; Mróz, Z. 1983: Variational approach by means of adjoint systems to structural optimization and sensitivity analysis. Part I.Int. J. Solids Struct. 19, 677–692
Dems, K.; Mróz, Z. (1985): Variational approach to first- and second-order sensitivity analysis of elastic structures.Int. J. Num. Meth. Eng. 21, 637–661
Dems, K.; Mróz, Z. 1987: Variational approach to sensitivity analysis in thermoelasticity.J. Thermal Stresses 10, 283–306
Haftka, R.T.; Mróz, Z. (1986): First- and second-order sensitivity analysis of linear and non-linear structures.AIAA J. 24, 1187–1192
Jones, R.M. 1975:Mechanics of composite materials. New York: McGraw-Hill
Landriani, S.G.; Rovati, M. 1991: Optimal design for 2D-structures made of composite materials.ASME J. Eng. Mat. & Tech. 113, 88–92
Lekhnitskii, S.G., 1968:Anisotropic plates. London: Gordon & Bredock
Malmajster, A.K.; Tamuz, V.P.; Teters, G.A. 1967:Soprotivlenie zestkich polimernych materialov (in Russian). Riga, Nauka
Matheus, H.C.; Mota Soares, C.M.; Mota Soares, C.A. 1991: Sensitivity analysis and optimal design of thin laminated composite structures.Proc. Course on CAOD of Structures (held in Trento)
Mróz, Z.; Dems, K. (1993): Discrete and continuous reinforcement of materials. In: P. Pedersen (ed.)Optimal design with advanced materials, pp. 383–406. Amsterdam: Elsevier
Olhoff, N.; Thomsen, J. 1990: Optimization of fiber orientation and concentration in composites.Proc. CEEC Course on Design and Analysis of Structures Made of Composite Materials (held in Milano)
Pedersen, P. 1989: On optimal orientation of orthotropic materials.Struct. Optim. 1, 101–106
Pedersen, P. 1991: On thickness and orientational design with orthotropic materials.Struct. Optim. 3, 69–78
Rasmussen, S.H. 1979: Optimization of fiber reinforced structures (in Danish).DCAMM Report S 12 127
Taucheret, T.R.; Adibhatla, S. (1984): Design of laminated plates for maximum stiffness.J. Composite Mat. 18, 58–69
Thomsen, J. 1991: Optimization of composite discs.Struct. Optim. 3, 89–98
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dems, K. Sensitivity analysis and optimal design for fiber reinforced composite disks. Structural Optimization 11, 178–186 (1996). https://doi.org/10.1007/BF01197032
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01197032