Abstract
Thin-walled conical shells subjected to uniformly distributed external pressure loading are considered assuming that the thickness of the shells is piece-wise constant. Minimum weight designs are established under the condition that the load carrying capacity of the optimized shell coincides with that of the reference shell of constant thickness. The material of the shell is assumed to obey Tresca's yield condition and the associated flow law. The exact yield surface in the space of generalized stresses corresponding to the Tresca condition is approximated with the squares on the planes of membrane forces and moments, respectively.
Similar content being viewed by others
References
Hodge, P.G. 1960: Plastic analysis of circular conical shells. Trans.ASME. J. Appl. Mech. 27, 696–700
Hodge, P.G. 1963:Limit analysis of rotationally symmetric plates and shells. Englewood Cliffs: Prentice Hall
Hodge, P.G.; Deruntz, J.A. 1964: The carrying capacity of conical shells under concentrated and distributed loads. In: Olszak, W.; Sawczuk, A. (eds.)Non-classical shell problems (Proc. IASS Symp), pp. 660–684. Warsaw: North Holland, PWN
Hodge, P.G.; Lakshmikantham, C. 1963: Limit analysis of shallow shells of revolution.Trans. ASME. J. Appl. Mech. 30, 215–218
Jones, N.; Ich, N.T. 1972: The load carrying capacities of symmetrically loaded shallow shells,Int. J. Solids & Struct. 8, 1339–1351
Kruzelecki, J.; Žyczkowski, M. 1985: Optimal structural design of shells — a survey.SM Archives 10, 101–170
Kuech, R.W.; Lee, S.L. 1965: Limit analysis of simply supported conical shells subjected to uniform internal pressure.J. Franklin Inst. 280, 71–87
Lance, R.H.; Lee, C.-H. 1969: The yield point load of a conical shell.Int. J. Mech. Sci. 11, 129–143
Lance, R.H.; Onat, E.T. 1963: Analysis of plastic shallow conical shells.Trans. ASME. J. Appl. Mech. 30, 199–210
Lellep, J. 1991:Optimization of plastic structures. Tartu: Tartu Univ. Press
Lellep, J.; Puman, E. 1994: Optimal design of rigid-plastic conical shells of piece-wise constant thickness.Tartu Ülik. Toim. (Proc. Tartu Univ.)973, 21–39
Onat, E.T. 1960: Plastic analysis of shallow conical shells.J. Eng. Mech. Div. Proc. ASCE 86, 1–12
Rozvany, G.I.N. 1989:Structural design via optimality criteria. Dordrecht: Kluwer
Sankaranarayanan, R. 1964: A generalized square yield condition for shells of revolution.Proc. India Acad. Sci. A59, 127–140
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lellep, J., Puman, E. Optimization of plastic conical shells of piece-wise constant thickness. Structural Optimization 18, 74–79 (1999). https://doi.org/10.1007/BF01210695
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01210695