Summary
A Theory About Cutting Rock With a Water Jet
It is commonly accepted that parameters like compressive strength, fracture toughness etc. are relevant parameters controlling the resistance to mechanical destruction of rock. Parameters like these have no explicit relevance, however, in destruction of rock with a continuous high pressure water jet. A theoretical model about cutting slots in rock is discussed. The model aims mainly at a qualitative description and as a consequence of that at finding the relevant rock parameters. A rock is shown to be characterized by its threshold pressure which can be interpreted as a measure of its “microscale” tensile strength and by its erosion resistance which can be interpreted as the square of the slenderness ratio of the pores of the rock divided by the diameter of the grains.
Zusammenfassung
Eine Theorie über das Schneiden von Gestein mit einem Wasserstrahl
Es ist allgemein bekannt, daß Druckfestigkeit, Bruchzähigkeit etc. bei der mechanischen Zerstörung von Gestein wichtige Parameter sind. Bei der Gesteinszerstörung mit Hochdruckwasserstrahlen verlieren diese Parameter jedoch an Bedeutung. Ein theoretisches Modell über das Schneiden von Gestein mit einem Wasserstrahl wird zur Diskussion gestellt. Dieses Modell soll hauptsächlich eine qualitative Beschreibung und auch eine Ermittlung der maßgebenden Parameter des Vorganges ermöglichen. Demnach kann man Gestein mittels des Grenzdruckes charakterisieren, der als Maß seiner „Mikrozugfestigkeit“ verstanden werden kann; ein maßgebender Parameter ist auch der Erosionswiderstand, der sich errechnet als das Quadrat der Schlankheit der Poren geteilt durch die Korngröße.
Résumé
Une théorie de couper une roche avec un jet d'eau sous haute pression
Tout le monde l'accepte que des paramètres comme la résistance à la compression, la résistance à la traction, la ténacité de rupture, etc. sont les paramètres applicables quand il s'agit de destruction mécanique de roche. Cependant ces paramètres ne sont pas d'une importance directe pour la destruction de roche avec un jet d'eau sous haute pression. On discute sur un modèle théorique d'une coupe de rainures. Principalement ce modèle tend à une description qualitative et par suite de ça à donner des renseignements sur les paramètres applicables. Il se trouve que la roche est caractérisée par sa pression de seuil ce qui peut être interprété comme une “microrésistance à la rupture par traction” et par sa résistance à l'érosion ce qui peut être interprété comme le carré de l'élancement des pores divisé par le diamètre de grain.
Similar content being viewed by others
References
Rehbinder, G.: Some Aspects on the Mechanism of Erosion of Rock With a High Speed Water Jet. Proc. 3rd Int'l. Symp. on Jet Cutting Techn. Paper El Chicago, May 1976,.
Rehbinder, G.: Erosion Resistance of Rock. Paper El of the 4th Int'l. Symp. on Jet Cutting Techn. Canterbury, April 1978.
Rehbinder, G.: Slot Cutting in Rock With a High Speed Water Jet. Int. J. Rock Mech. Min. Sci., Vol. 14, pp. 229–234 (1977).
Rehbinder, G.: The Drag Force on the Grains in a Permeable Medium Subjected to a Water Jet. Journal of Applied Mathematics and Physics (ZAMP). Vol. 28, pp. 1005–1016 (1977).
Rehbinder, G.: A Water Zone Propagating Through a Permeable Rock. Rock Mechanics9, pp. 245–253 (1977).
Rehbinder, G.: Measurement of the Average Pore Velocity of Water Flowing Through a Rock Specimen. Rock Mechanics11, pp. 19–28 (1978).
Scheidegger, A. E.: The Physics of Flow Through Porous Media, Toronto 1974.
Author information
Authors and Affiliations
Additional information
With 5 Figures
Rights and permissions
About this article
Cite this article
Rehbinder, G. A theory about cutting rock with a water jet. Rock Mechanics 12, 247–257 (1980). https://doi.org/10.1007/BF01251028
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01251028