Abstract
This paper presents a matrix approach coupled to the notion of constraints for the representation of tolerance zones within CAD/CAM (computer-aided design and manufacture) systems. The proposed theory, reproduces themeasurable ornon-invariant displacements associated with various types of tolerance zone. This is done using the homogeneous transforms commonly associated with robotic modelling.
This matrix representation is completed by a set of inequalities defining the bounds of the tolerance zones. Moreover, the generation of the model and its mathematical definition allows for its use in the representation of clearances and for the computation of tolerance transfer. An example illustrates the application of the model to a simplified gear pump mechanism.
Similar content being viewed by others
References
A. A. G. Requicha, “Toward a theory of geometric tolerancing”,Journal of Robotic Research,2 (40), winter 1983.
R. Jayaraman and V. Srinivasan, “Virtual boundary requirements and conditional tolerances in mechanical design”, RC 12942 (58050), IBM T. J. Watson Research Center, October 7, 1987.
J. U. Turner, “Exploiting solid models for tolerance computations”,Geometric Modeling for Product Engineering, IFIP 1990 pp. 237–258.
A. Desrochers, “Modèle conceptuel du dimensionnement et du tolérancement des mécanismes. Représentation dans les systèmes CFAO”, Doctoral Thesis, École Centrale Paris, September 24, 1991.
A. Rivière, “La géométrie du groupe des déplacements appliquée à la modélisation du tolérancement”, Doctoral Thesis, École Centrale Paris, September 22, 1993.
J. M. Herve, “La géométrie du groupe des déplacements appliquée à l'analyse cinématique des mécanismes”, State Doctoral Thesis, Paris VI, May 1976.
D. Gaunet, “Modèle formel de tolérancement de position: contribution à l'aide au tolérancement en CFAO”, Doctoral Thesis, Ecole Centrale Paris, 1993.
“Dessins techniques — Tolérancement géométrique — Tolérancement de forme, orientation, position et battement — Généralités, définitions, symboles, indications sur les dessins”, ISO, 1983.
“Dessins techniques — Cotation et tolérancement des profils”, ISO, 1987.
“Dessins techniques — Tolérancement géométrique — Tolérancement de localisation”, ISO, 1987.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Desrochers, A., Rivière, A. A matrix approach to the representation of tolerance zones and clearances. Int J Adv Manuf Technol 13, 630–636 (1997). https://doi.org/10.1007/BF01350821
Issue Date:
DOI: https://doi.org/10.1007/BF01350821