Abstract
Aluminum alloys with magnesium that are deformable and not strengthened by heat treatment are widely used as a structural meterial due to their good weldability, high corrosion resistance, and high ductility. However, even the strongest alloys of this system, containing 5–6% Mg, have low strength characteristics. For example, annealed sheets of alloy AMg6 have σb = 340 N/mm2 and σ0.2 = 180 N/mm2. The present work concerns the possibility of strengthening AI - Mg alloys by an additional alloying with scandium.
Similar content being viewed by others
References
Industrial Aluminum Alloys. A Reference Book [in Russian], Metallurgiya, Moscow (1984).
Patent 3619181, U.S. (1971).
V. I. Elagin, V. V. Zakharov, A. A. Petrova, et al., “Effect of scandium on the structure and properties of AI - Zr - Mg alloys,” Izv Akad. Nauk SSSR,Metally, No. 4, 180 - 183 (1983).
V. I. Elagin, V. V. Zakharov, and T. D. Rostova, “Prospects of alloying aluminum alloys with scandium,”Tsveinve Metally, No. 12, 96 - 99 (1982).
M. E. Drits, L. S. Toropova, and Yu. G. Bykov, “Effect of rareearth metals on the mechanical properties of AI - 6.5% Mg alloy,”Metalloved. Term. Obrab. Met., No. 10, 35 - 37 (1980).
M. E. Drits, L. S. Toropova, Yu. G. Bykov, et al.,Metallurgy and Metal Science of Nonferrous Alloys [in Russian], Nauka, Moscow (1982).
I. I. Velichko, G. V. Dodin, B. K. Metelev, et al., “Problems of the use of scandium-alloyed aluminum alloys of the 01570, 01421, 01535 type,” in:Abstracts of Reports at the International Scientific and Practical Conference“Scandium and Prospects for Its Use,” 18 – 19 October 1994 [in Russian], Moscow (1994), p. 15.
I. M. Krutikova, A. V. Belov, V. l. Gerasimov, and N. V. Kopernik, “Structural aluminum alloys for processes for obtaining fluorides of alkali and alkali-earth metals of special purity,”Ibid. p. 21.
L. I. lvanov, V. M. Lazorenko, Yu. M. Platov, et al., “Mechanical properties and structure of aluminum-base alloys containing scandium and irradiated by electrons and neutrons,”Ibid., p. 17.
I. V.AI'tovskii, S. N.Votinov, V. I.Dobatkin, et al., in:Structural Materials for Reactors for Thermonuclear Synthesis [in Russian], Nauka, Moscow (1983), pp. 40 - 48.
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 33 – 36, June, 1996.
Rights and permissions
About this article
Cite this article
Filatov, Y.A. Deformable alloys based on the Al - Mg - Se system. Met Sci Heat Treat 38, 271–274 (1996). https://doi.org/10.1007/BF01395830
Issue Date:
DOI: https://doi.org/10.1007/BF01395830