Abstract
An optimization method is presented to design a minimum weight structure with constraints imposed on the closed-loop frequency distribution and damping parameters. The control approach used here is linear quadratic regulator theory. The control model reduction is achieved by using Model Error Sensitivity Suppresssion. The application of the method is illustrated by designing the structure for different order of control models with the same constraints. The different designs obtained by these approaches are compared. The optimization problem is solved by using a nonlinear mathematical approach.
Similar content being viewed by others
References
Bendsøe, M.P.; Olhoff, N.; Taylor, J.E. 1987: On the design of structures and controls for optimal performance of actively controlled flexible structures.Mech. Struct. & Mach. 15, 265–295
Bodden, D.S.; Junkins, J.L. 1985: Eigenvalue optimization algorithms for structure/controller design iterations.J. of Guidance and Control 8, 697–706
D'Azzo, J.; Houpis, C. 1988:Linear control system analysis and design: conventional and modern. New York: McGraw-Hill
Hale, A.L.; Lisowki, R.J.; Dahl, W.E. 1985: Optimal simultaneous structural and control design of maneuvering flexible spacecraft.J. of Guidance and Control 8, 86–93
Khot, N.S.; Venkayya, V.B.; Eastep, F.E. 1984: Structural modifications of large flexible structural modifications to reduce the LOS error in large space structures.AIAA/ASME 25th Structures, Structural Dynamics and Materials Conf. (held in Palm Springs CA) Paper No. 84-0977
Khot, N.S.; Venkayya, V.B.; Eastep, F.E. 1986: Optimal structural modifications to enhance the active vibration of control of flexible structures.AIAA J. 8, 1368–1374
Khot, N.S.; Grandhi, R.V: 1988: Structural and control optimization with weight and Frobenius norm as performance functions. In: Rozvany, G.I.N.; Karihaloo, B.L. (eds.)Structural optimization, pp. 151–158. Dordrecht: Kluwer
Lim, K.B.; Junkins, J.L. 1987: Robust optimization of structural and controller parameters.J. of Guidance and Control 12, 89–96
Lust, R.V.; Schmit, L.A. 1986: Control augmented structural synthesis.AIAA/ASME/ASCE/AHS 27th SDM Conf. (held in San Antonio TX) Paper No. 86-1014
Onoda, J.; Haftka, R.T. 1987: An approach to structure/control optimization for large space structures.AIAA J. 25, 1133–1138
Salama, M.; Garba. J.; Demsetz.; Udwadia, F. 1988: Simultaneous optimization of controlled structures.Compt. Mech. 3, 275–282
Sesak, J.R.; Linkins, P.; Coradetti, T. 1979: Flexible spacecraft control by model error sensitivity suppression.J. Astronautical Sci. 27, 131–156
Thareja, R.; Haftka, R.T. 1986:NEWSUMT-A: A modified version of NEWSUMT for inequality and equality constraints. Virginia Polytechnic Institute and State University, Blacksburg VA, 1–35
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Khot, N.S. On optimization of structural and control systems using a reduced order model. Structural Optimization 2, 185–191 (1990). https://doi.org/10.1007/BF01836567
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01836567