Sommario
Nella presente memoria si delinea un metodo di calcolo fondato sulle equazioni integrali per la soluzione numerica dei problemi lineari di elasticità del continuo omogeneo. La veste matematica adottata é sufficientemente generale perché possa riferirsi all'analisi sia dello stato triplo sia dello stato piano di deformazione o di tensione, come pure all'analisi delle lastre e dei casi specializzati assialsimmetrici.
Dedotte per via indiretta le equazioni integrali, il procedimento risolutivo è fondato su principi variazionali e si avvale di una conveniente discretizzazione del contorno mediante elementi finiti.
Particolare attenzione è rivolta a definire le condizioni asintotiche dei campi elementari di spostamento al fine di assicurare teoricamente a priori il condizionamento delle equazioni algebriche risolventi, senza alcuna restrizione per quanto riguarda la natura del contorno e le condizioni ivi imposte.
L'efficienza, la praticità e la flessibilità d'impiego sono caratteristiche peculiari del metodo, per altro già ampiamente collaudato dall'autore in diverse applicazioni di cui possono trovarsi notizie nella bibliografia citata.
Summary
This paper concerns an integral equation method for the numerical solution of the linear problems of elasticity of the homogeneous continuum. The mathematical form adopted is sufficiently general to refer to both plane and three dimensional analysis as well as to analysis of plates and specialized axisymmetric cases.
Having indirectly deduced the integral equations, the resolving procedure is based on variational principles and uses a convenient discretization of the boundary through the use of finite elements.
Particular attention is given to the definition of the asymptotic conditions of the elementary displacement field to theoretically ensure a priori the conditioning of the resolving algebraic equations without any restriction as regards the nature of the boundary and the conditions thereby imposed.
Efficiency, praticality and flexibility of use are characteristics particular of this method and have already been widely tested by the author in varying applications. Further information on the above can be found in the bibliography cited.
References
Jaswon M. A., Symm G. T.,Integral equation method in potential theory and elastostatics, Academic Press, London, 1977.
Rizzo F. J.,An integral equation approach to boundary value problems of classical elastostatics, Quart. Appl. Math., vol. 25, 83–95, 1967.
Cruse T. A.,Application of the boundary-integral equation method to three dimensional stress analysis, J. Comp. & Struct., vol. 3, 509–527, Pergamon Press, 1973.
Cruse T. A.,An improved boundary-integral equation method for three dimensional elastic stress analysis, J. Comp. & Struct., vol. 4, 741–754, Pergamon Press, 1974.
Lachat J. C., Watson J. O.,Effective numerical treatment of boundary integral equations: a formulation for three-dimensional elastostatics, Int. J. Num. Meth. Eng., vol. 10, 991–1005, 1976.
Oliveira E. R. A.,Plane stress analysis by a general integral method, J. Eng. Mech. Div., vol. 94, EM 1, 79–101, 1968.
Finlayson B. A., Scriven L. E.,The method of weighted residuals — A review, Appl. Mech. Rev., vol. 19, n. 9, 1976.
Zienkiewicz O. C., Kelly D. W., Bettes P.,The coupling of the finite element method and boundary solution procedures, Int. J. Num. Meth. Eng., vol. 11, 355–375, 1977.
Chaudonneret M.,Calcul de concentrations de contrainte en elasticitè et viscoplasticitè par la methode des equations integrales, Int. Symp. on Innovative Numerical Analysis in Applied Engennering Science, CETIM, Versailles-France, 23–27 May 1977.
Clerici P., Sirtori S., Terranova A.,Riduzione del coefficiente di sovrasollecitazione al raccordo montante traversa di un telaio, V. Conv. AIAS, Bari, 30 Sett. - 1 Ott. 1977.
Sirtori S., Terranova A.,Coefficiente di sovrasollecitazione al raccordo montante-traversa di telai ad anello, VI Conv. AIAS, Brescia, 22–24 Giugno 1978.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sirtori, S. General stress analysis method by means of integral equations and boundary elements. Meccanica 14, 210–218 (1979). https://doi.org/10.1007/BF02128438
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02128438