Abstract
Acoustic-emission (AE) count rates are presented for tensile loading of unidirectional boron-epoxy and for aluminum sheets reinforced with unidirectional boron-epoxy. It is shown that different prepreg materials have different characteristic AE patterns. Results from composite-reinforced metal specimens show that early failures are accompanied by a sharp increase in AE count rate at the knee of the bilinear stress-strain diagram. It is further shown that the count rates are a function of specimen fabrication and that higher total counts do not necessarily correspond to early failures.
Similar content being viewed by others
References
Mehan, R. L. andMullin, J. V., “Analysis of Composite Failure Mechanisms Using Acoustic Emissions,”J. Comp. Matl.,5,266–269 (1971).
Mullin, J. V., andMehan, R. L., “Evaluation of Composite Failures Through Fracture Signal Analysis,”J. Test. and Eval.,1,215–219 (1973).
Rollins, F. R., Jr., “Acoustic Emission from Boron-Aluminum Composites During Tensile Fracture and Fatigue,” Midwest Research Inst. Tech. Rpt. (6), (1971).
Liptai, R. G., “Acoustic Emission from Boron-Aluminum Composite Materials: Testing and Design, 2nd Conf., ASTM STP 497 (April 1972).
Tetelman, A. S., “Acoustic Emission and Fracture Mechanics Testing of Metals and Composites,” U.S.-Japan Joint Symp. on Acoustic Emission, Tokyo (July 1972).
Herakovich, C. T. and Carri, R. L., “Tensile Strength of Boron/Epoxy Reinforced Aluminum,” Composite Materials in Engineering Design, Proc., 6th St. Louis Symp. on Comp. Mat. (May 1972).
Herakovich, C. T., Davis, J. G., Jr. and Dexter, H. B., “Reinforcement of Metals with Advanced Filamentary Composites,” Comp. Matl.: Testing and Design, ASTM 3rd Conf., Williamsburg, VA (March 1973).
Henneke, E. G., II and Herakovich, C. T., “Acoustic Emission Investigation of Composite Reinforced Metals,” VPI-E-27, Final Report NASA NAS1-10646-17 (Aug. 1973).
Author information
Authors and Affiliations
Additional information
Work was supported by NASA NAS1-10646-17 and NASA NGR-47-004-101.
Rights and permissions
About this article
Cite this article
Henneke, E.G., Herakovich, C.T., Jones, G.L. et al. Acoustic emission from composite-reinforced metals. Experimental Mechanics 15, 10–16 (1975). https://doi.org/10.1007/BF02318519
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02318519