Skip to main content
SpringerLink
Log in

Submicron deformation field measurements: Part 1. Developing a digital scanning tunneling microscope

  • Published:
Experimental Mechanics Aims and scope Submit manuscript

Abstract

A new experimental method has been developed for studying deformations of micromechanical material systems at the submicron scale. To that end, a special digital scanning tunneling microscope (STM) was designed to be coupled to a mechanically deforming specimen. Operating in constant current mode, this digitally controlled STM records detailed topographies of specimen surfaces with a resolution of 10 nm in-plane and 7 nm out-of-plane over a 10 μ × 10 μ area. Three-dimensional displacement field information is extracted by comparing topographies of the same specimen area before and after deformation by way of a modified digital image correlation algorithm. The resolution of this (combined) displacement measuring method was assessed on translation and uniaxial tensile tests to be 5 nm for in-plane displacement components and 1.5 nm for out-of-plane motion over the same area. This is the first paper in a series of three in which the authors delineate the main features of this specially designed microscope and describe how it is constituted, calibrated and used with the improved version of the digital image correlation method to determine deformations in a test specimen at the nanoscale.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Binnig, G., Rohrer, H., Gerber, C., andWeibel, E., “Tunneling Through a Controllable Vacuum Gap,”Appl. Phys. Lett.,40,178–180 (1982).

    Article  Google Scholar 

  2. Sutton, M.A., Wolters, W.J., Peters, W.H., Ranson, W.F., andMcNeil, S.R., “Determination of Displacements Using an Improved Digital Correlation Method,”Image Vision Computing,1 (3),133–139 (1983).

    Google Scholar 

  3. Sutton, M.A., Cheng, M., Peters, W.H., Chao, Y.J., andMcNeil, S.R., “Application of an Optimized Digital Image Correlation Method to Planar Deformation Analysis,”Image Vision Computing,4 (3),143–150 (1986).

    Google Scholar 

  4. Sutton, M.A., McNeil, S.R., Jang, J., andBabai, M., “Effects of Subpixel Image Restoration on Digital Correlation Error-Estimates,”Opt. Eng.,27 (10),870–877 (1988).

    Google Scholar 

  5. Bruck, H.A., McNeil, S.R., Sutton, M.A., andPeters, W.H., “Digital Image Correlation Using Newton-Raphson Method of Partial Differential Correction,” EXPERIMENTAL MECHANICS,29 (3),261–267 (1989).

    Article  Google Scholar 

  6. Chu, T.C., Ranson, W.F., Sutton, M.A., andPeters, W.H., “Applications of Digital Image Correlation Techniques to Experimental Mechanics,” EXPERIMENTAL MECHANICS,25 (3),232–244 (1985).

    Article  Google Scholar 

  7. Vendroux, G. and Knauss, W.G., “Submicron Deformation Field Measurements: Part 2. Improved Digital Image Correlation,” EXPERIMENTAL MECHANICS,forthcoming.

  8. Vendroux, G., “Scanning Tunneling Microscopy in Micromechanics Investigations,”Doctoral thesis, GALCIT Report SM93-36, California Institute of Technology, Pasadena (1994).

    Google Scholar 

  9. Vendroux, G. andKnauss, W.G., “Deformation Measurements at the Sub-micron Size Scale I: Design of a Digital Scanning Tunneling Microscope,”GALCIT Report SM94-4a, California Institute of Technology, Pasadena (1994).

    Google Scholar 

  10. Vendroux, G. andKnauss, W.G., “Deformation Measurements at the Sub-micron Size Scale II: Refinements in the Algorithm for Digital Image Correlation,”GALCIT Report SM94-5, California Institute of Technology, Pasadena (1994).

    Google Scholar 

  11. Vendroux, G. andKnauss, W.G., “Deformation Measurements at the Sub-micron Size Scale III: Deformation Mechanisms in a Structural Polymer,”GALCIT Report SM94-6, California Institute of Technology, Pasadena (1994).

    Google Scholar 

  12. Schmid, N. andKnauss, W.G., “Deformation Measurements at the Sub-micron Size Scale IV: Application to Composite Micromechanics,”GALCIT Report SM95-8a, California Institute of Technology, Pasadena (1995).

    Google Scholar 

  13. Fowler, R.H. andNordheim, L., “Electron Emission in Intense Electric Field,”Proc. Roy. Soc. London,A119,173–180 (1928).

    Google Scholar 

  14. Simmons, J.G., “Generalized Formula for the Electric Tunnel Effect Between Similar Electrodes Separated by a Thin Insulating Film,”J. Appl. Phys.,34,1793–1803 (1963).

    Google Scholar 

  15. Binnig, G. andSmith, D.P.E., “Single Tube Three-dimensional Scanner for Scanning Tunneling Microscopy,”Rev. Sci. Instr.,57 (8)1688–1689 (1986).

    Article  Google Scholar 

  16. Burleigh Instrument Inc., Micropositioning Systems Catalog, Fishers, NY (1990).

  17. Vendroux, G. and Knauss, W.G., “Submicron Deformation Field Measurements: Part 3. Demonstration of Deformation Determinations,” EXPERIMENTAL MECHANICS,forthcoming.

Download references

Author information

Authors and Affiliations

  1. Graduate Aeronautical Laboratories, California Institute of Technology, 91125, Pasadena, CA

    G. Vendroux (Graduate Student) & W. G. Knauss (SEM Member) Professor)

Authors
  1. G. Vendroux
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. W. G. Knauss
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Vendroux, G., Knauss, W.G. Submicron deformation field measurements: Part 1. Developing a digital scanning tunneling microscope. Experimental Mechanics 38, 18–23 (1998). https://doi.org/10.1007/BF02321262

Download citation

  • Received:

  • Revised:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02321262

Keywords

Search

Navigation