References
Adams, D.F. andWalrath, D.E., “Further Developments of the Iospipescu Shear Test Method,”Experimental Mechanics,27 (2),113–119 (1987).
Spigel, B.S., Prabhakaran, R. andSawyer, J.W., “An Investigation of the Iosipescu and Asymmetric Four Point Bend Test,”Experimental Mechanics,27 (1),57–63 (1987).
Sullivan, J.L., Kao, B.G. andVan Oene, H., “Shear Properties and a Stress Analysis Obtained from Vinyl-ester Iosipescu Specimens,”Experimental Mechanics,24 (3),223–232 (1984).
Walrath, D.E. and Adams, D.F., “Analysis Of The Stress State In An Iosipescu Test Specimen,” Rep. No. UWME-DR-301-102-1, Dept. of Mech. Eng., Univ. of Wyoming (June 1983).
Iosipescu, N., “Photoelastic Investigations On An Accurate Procedure For The Pure Shear Testing of Materials,”Rev. de Mec. Appl.,1,147–164 (1963).
Walrath, D.E. and Adams, D.F., “Verification and Application of the Iosipescu Shear Test Method,” Rep. No. UWME-DR-401-103-1, Dept. Mech. Eng., Univ. of Wyoming (June 1984).
Wang, S.S. and Dasgupta, A., “Development of Iosipescu-Type Test for Determining In-Plane Shear Properties of Fiber Composite Materials: Critical Analysis and Experiment,” Rep. No. UILU-ENG-86-5021, Depts. of TAM and Aero. and Astro. Eng. Univ. of Illinois (1986).
Adams, D.F. andWalrath, D.E., “Current Status of the Iosipescu Shear Test Method,”J. Comp. Mat.,21,494–507 (1987).
Sullivan, J.L., Blais, E. andOene, H., “Transmission Photoelasticity of Centrally Loaded Generally and Specially Orthotropic Beams,”Experimental Mechanics,27 (2),208–219 (1987).
Spigel, B.S., “An Experimental and Analytical Investigation of the Iosipescu Shear Test For Composite Materials,” Master's Thesis, Old Dominion Univ. (Aug. 1984).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sullivan, J.L. The use of losipescu specimens. Experimental Mechanics 28, 326–328 (1988). https://doi.org/10.1007/BF02329031
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02329031