Abstract
In this paper, the minimum size of the representative volume element (RVE) of a heterogeneous material is determined experimentally using the digital image correlation technique. Experiments of uniaxial compression and thermal expansion were conducted on PBS 9501, a high explosive simulant material. The minimum size of the RVE of the PBS 9501 heterogeneous material, where the average crystal diameter of the material is of the order of 100 μm, was determined to be approximately 1.5 mm. This result is consistent with numerical calculations on polycrystalline materials and some other composites.
Similar content being viewed by others
References
Hill, R., “Elastic Properties of Reinforced Solids: Some Theoretical Principles,”Journal of the Mechanics and Physics of Solids,11,357–372 (1963).
Hill, R., “The Essential Structure of Constitutive Laws for Metal Composites and Polycrystals.”Journal of the Mechanics and Physics of Solids,15,79–95 (1967).
Drugan, W.J., andWillis, J.R., “A Micromechanics-based Non-local Constitutive Equation and Estimates of Representative Volume Element Size for Elastic Composites,”Journal of the Mechanics and Physics of Solids,44,497–524 (1996).
Gusev, A.A., “Representative Volume Element Size for Elastic Composites: A Numerical Study,”Journal of the Mechanics and Physics of Solids,15,1449–1459 (1997).
Chu, T.C., Ranson, W.F., Sutton, M.A., andPeters, W.H., “Applications of Digital Image Correlation Techniques to Experimental Mechanics,” EXPERIMENTAL MECHANICS,25,232–244 (1985).
Bruck, H.A., McNeil, S.R., Sutton, M.A., andPeters, W.H., “Digital Image Correlation using Newton-Raphson Method of Partial Differential Correction,” EXPERIMENTAL MECHANICS,29,261–267 (1989).
Vendroux, G., andKnauss, W.G., “Submicron Deformation Field Measurements: Part 2. Improved Digital Image Correlation,” EXPERIMENTAL MECHANICS,38,86–92 (1998).
Ren, Z-Y., andZheng, Q-S., “A Quantitative Study of Minimum Sizes of Representative Volume Elements of Cubic Polycrystals-Numerical Experiments,”Journal of the Mechanics and Physics of Solids,50,881–893 (2002).
Elvin, A.A., “Number of Grains Required to Homogenize Elastic Properties of Polycrystalline Ice,”Mechanics of Materials 22,51–64 (1996).
Nye, J.F., Physical Properties of Crystals, Oxford University Press, Oxford (1957).
Skidmore, C.B., Phillips, D.S., Son, S.F., andAsay, B.W., “Characterization of HMX Particles in PBX 9501,”Proceedings of the Topical Conference on Shock Compression of Condensed Matter, Los Alamos, New Mexico, American Institute of Physics, 112–119 (1997).
Berghout, H.L., Son, S.F., Skidmore, C.B., Idar, D.J., andAsay, B.W., “Combustion of Damaged PBX 9501 Explosive,”Thermochimica Acta,384,261–277 (2002).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Liu, C. On the minimum size of representative volume element: An experimental investigation. Experimental Mechanics 45, 238–243 (2005). https://doi.org/10.1007/BF02427947
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02427947