Abstract
Embedment tests yield foundtion moduli and embedding strengths which can be input to beam-on-foundation models which predict the load-deformation behaviour of wooden joints with laterally loaded fasteners such as nails or bolts. Test procedures and apparatus suitable for standardized embedment tests on solid wood or wood-based sheet materials are described. The need for specimen fabrication techniques and specimen support arrangements which reflect the stress conditions for fasteners inserted into members of real joints is emphasized.
Similar content being viewed by others
References
Foschi, R. O. and Bonac, T., ‘Load-slip characteristics for connections with common nails’,Wood Science,9(3) (1977) 118–123.
Smith, I., ‘Short term load tests on whitewood embedment specimens with a single plain circular section steel connector in a hole of the same diameter’ TRADA Research Report 1/82 (Timber Research and Development Association, High Wycombe, UK, 1982).
Noren, B., ‘Method of testing nails in wood’ (second draft), CIB-W18 Paper No. 14-7-2, Warsaw, May 1981.
Whale, L. R. J. and Smith, I., ‘Mechanical joints in structural timberwork—Information for probabilistic design’, TRADA Research Report 17/86 (Timber Research and Development Association, High Wycombe, UK, 1986).
Idem,, ‘Mechanical timber joints’, TRADA Research Report 18-86 (Timber Research and Development Association, High Wycombe, UK, 1986).
Whale, L. R. J., Smith, I. and Larsen, H. J., ‘Design of nailed and bolted joints—Proposal for the revision of existing formulae in draft Eurocode 5 and the CIB code’, CIB-W18A Paper No. 20-7-1, Dublin, September 1987.
Whale, L. R. J. and Smith, I., ‘A method for determining the embedding characteristics of wood and wood-based materials’, RILEM 57-TSB, Beit Oren, Israel, June 1985.
Smith, I. and Wale, L. R. J., ‘The influence of orientation of mechanical joints on their mechanical behaviour’, CIB-W18 Paper No. 18-7-2. Beit Oren, Israel, June 1985.
RILEM/CIB Draft Recommendation TT-1B, ‘Testing methods for joints with mechanical fasteners in load bearing timberwork. Annex B. Nails’ (RILEM/CIB, 1983).
CIB Structural Timber Design Code, 6th Edn, Publication 66, International Council for Building Research Studies and Documentation Working Commission W18 (CIB-W18) (1983).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Whale, L.R.J., Smith, I. A method for measuring the embedding characteristics of wood and wood-based materials. Materials and Structures 22, 403–410 (1989). https://doi.org/10.1007/BF02472217
Issue Date:
DOI: https://doi.org/10.1007/BF02472217