Abstract
This paper describes some examples of the use of differential scanning calorimetry (DSC) in providing information for advanced solidification processing of metals and alloys. Spray forming, squeeze casting, grain refinement and crystallization of amorphous alloys are all discussed. DSC measurements are shown to be valuable for testing kinetic theories of nucleation and growth, and validating solidification process models.
Zusammenfassung
Vorliegend werden einige Beispiele für den Einsatz von DSC zur Gewinnung von Informationen über Erstarrungsprozesse von Metallen und Legierungen beschrieben. Dabei wurden sowohl Spritzformen, als auch Druckgießen, Kornverfeinerung und Kristallisation von amorphen Legierungen behandelt. DSC-Messungen erweisen sich als nützlich für das Testen der kinetischen Theorien von Keimbildung und Keimwachstum und zur Bestätigung der Erstarrungsprozeßmodelle.
Similar content being viewed by others
References
B. Cantor, J. Microscopy, 169 (1993) 97.
W. Kurz and D. J. Fisher, ‘Fundamentals of Solidification’, Trans. Tech., Switzerland, 1989.
P. S. Grant and B. Cantor, Cast Metals, 4 (1991) 140.
A. P. Newbery, Part II thesis, Oxford University, 1988.
P. S. Grant, D. L. Zhang, L. Katgerman and B. Cantor.
‘Metal Matrix Composites: Technology and Industrial Applications’ Techtrends, Innovation, Paris 1990, p. 128.
E. A. Feest, Metals and Materials, 4 (1988) 273.
T. C. Willis, Metals and Materials, 4 (1988) 485.
R. G. Brooks and J. V. Wood, ‘ICSF-1’ Osprey Metals, Swansea, 1991.
R. G. Brooks and J. V. Wood, ‘ICSF-1’ Osprey Metals, Swansea, 1993.
P. S. Grant, B. Cantor and L. Katgerman, Acta Metals Mater., 41 (1993) 3097.
P. S. Grant, B. Cantor and L. Katgerman, Acta Metals Mater., 41 (1993) 3109.
P. S. Grant P. P. Mather and B. Cantor, Mater. Sci. Eng., A179A180 (1994) 72.
M. Jolly, The Foundryman, (1990) 509.
D. L. Zhang, C. Brindley and B. Cantor, J. Mater. Sci., 28 (1993) 2267.
D. L. Zhang and B. Cantor, ‘Modelling of squeeze casting’: submitted to Modelling Simulation in Materials Science Engineering.
J. W. Christian, ‘The Theory of Transformations in Metals and Alloys’, Pergamon, Oxford 1975.
D. Turnbull, J. Appl. Phys., 21 (1950) 1022.
W. T. Kim, B. Cantor, W. D. Griffth and M. R. Jolly, Int. J. Rapid. Solidification, 7 (1992) 245.
C. C. Wang and C. S. Smith, Trans. Metals Soc, AIME, 188 (1950) 136.
R. T. Southin and G. A. Chadwick, Acta Metall, 26 (1978) 223.
P. G. Boswell and G. A. Chadwick, Acta Metall, 28 (1980) 209.
K. I. Moore, D. L. Zhang and B. Cantor, Acta Metals Mater., 38 (1990) 1327.
D. L. Zhang, K. Chattopadhyay and B. Cantor, J. Mater Sci., 26 (1991) 1531.
D. L. Zhang and B. Cantor, Philos Mag., 62 (1990) 557.
B. Cantor and R. D. Doherty, Acta Metals, 27 (1979) 33.
W. T. Kim, D. L. Zhang and B. Cantor, Metall. Trans., 22A (1991) 2478.
W. T. Kim and B. Cantor, Acta Metall Mater., 40 (1992) 3339.
K. A. Q. O'Reilly and B. Cantor, Acta Metal. Mater., in press.
D. L. Zhang and B. Cantor, J. Cryst. Growth, 104 (1990) 583.
C. R. Ho and B. Cantor, Mater. Sci. Eng. A173 (1993) 37.
D. L. Zhang and B. Cantor, Metals. Trans., 24A (1993) 1195.
S. Savage and H. Fredriksson (eds) ‘Rapidly Quenched Materials 7’, Elsevier, Amsterdam 1991.
V. R. V. Ramaman and G. E. Fish, J. Appl. Phys., 53 (1982) 2273.
A. Zaluska and H. Matyja, J. Mater Sci., 18 (1983) 2163.
M. A. Gibson and G. W. Delamore, J. Mater Sci., 22 (1987) 4550.
C. F. Chang and J. Marti, J. Mater Sci., 18 (1983) 2297.
M. A. Hughes, A. R. Bhatti, W. Gao and B. Cantor, Materials Forum (Australi Bicentenary Volume) 11 (1988) 21.
M. A. Hughes, K. Ishii, W. T. Kim, A. R. Bhatti and B. Cantor, ‘Amorphous Metallic Materials 3’ eds. P. Duhaj, P. Mrafko and P. Svec, Trans. Tech., Switzerland, 1992, p. 25.
R. Ray, ‘Rapidly Solidified Amorphous and Crystalline Alloys’, eds B. H. Kear, B. C. Giessen and M. Cohen, North Holland, New York 1982, p. 435.
M. J. Rawson et al., in ‘Rapidly Solidified Materials: Properties and Processing’ eds P. W. Lee and J. H. Mole, ASM, Metals Park 1988, p. 37.
S. Hahn, S. Isserow and R. Ray, J. Mater. Sci., 22 (1987) 3395.
R. Ray, V. Panchanathan and S. Isserow, J. Metals, 35 (1983) 30.
S. Hahn, S. Isserow and R. Ray, J. Mater. Sci. Lett., 4 (1985) 972.
W. Gao and B. Cantor, Acta Metall, 36 (1988) 2293.
W. T. Kim, B. Cantor, K. Clay and C. Small, ‘Fundamental Relationships Between Microstructure and Mechanical of Metal Matrix Composites’ eds P. K. Liaw and M. N. Gungor, AIME, Warrendale, 1990, p. 89.
W. T. Kim, K. Clay, C. Small and B. Cantor, J. Non-Cryst. Solids, 127 (1991) 273.
I. T. H. Chang, K. Ishii and B. Cantor, Mater. Sci. Eng. A179/A180 (1994) 416.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cantor, B. Differential scanning calorimetry and the advanced solidification processing of metals and alloys. Journal of Thermal Analysis 42, 647–665 (1994). https://doi.org/10.1007/BF02546740
Issue Date:
DOI: https://doi.org/10.1007/BF02546740