Turbomachinery for small solar power plants

Abstract

Conversion of solar energy into mechanical or electrical energy in small solar power plants (10–500 kW) requires new design criteria, especially with regard to turbomachinary. The cycles suitable for solar power production are affected by many variable such as kinds of working fluid, range of power and maximum cycle temperature determined by the type of collector. Also, the size of the plant will influence the selection of the various components of the plant, especially that of the turbomachinery. A study of a suitable thermodynamic cycle and working fluid is done for diffèrent ranges of power and temperature. The working fluids considered are steam, toluene, and refrigerant 113 for the Rankine cycle systems and air for gas turbine systems. For Rankine cycles, turbine selection is a problem in the small power range. This is mainly due to the fact, that for high efficiency the enthalpy drop should be as high as possible, and the mass flow rate of the working fluid through the turbine becomes very small. This, in turn, requires high rotational speed, multistaging and partial admission, especially if water is the working fluid. Toluene offers better design criteria for the turbine in the same temperature and power range (50–200 kW). For the very small range (10 kW) refrigerant 113 or similar should be used, otherwise severe design problems with the turbine will occur. In this power range, photovoltaics may also be considered. For high concentration systems with “Brayton cycles” (800–1000°C) only open-cycle gas turbine plants should be used.