Abstract
A formula for calculating the critical gas velocity is found that is in good correlation with experimental data. Its generalization to the case of the presence of regular roughness on the surface of a packed bed is obtained.
Similar content being viewed by others
References
V. M. Olevskii, V. R. Rumchinskii, and A. M. Kalashnikov, Film Heat and Mass Transfer Equipment [in Russian], Moscow (1988).
H. Imura, H. Kusuda, and S. Funatsu, Chem. Eng. Sci.,32, 79–87 (1977).
S. Suzuki and T. Veda, Int. J. Multiphase Flow,3, 517–532 (1977).
J. Hewitt and N. Hall-Taylor, Annular Two-Phase Flows [Russian translation], Moscow (1974).
J. W. Miles, J. Fluid Mech.,8, 593–619 (1960).
T. B. Benjamin, J. Fluid Mech.,6, Pt. 2, 161–205 (1959).
L. G. Loitsyanskii, Mechanics of Liquids and Gases [in Russian], Moscow (1978).
I. L. Poykh, Technical Hydrodynamics [in Russian], Leningrad (1976).
L. D. Landau and E. M. Lifshits, Hydrodynamics [in Russian], Moscow (1986).
L. P. Kholpanov, Yu. P. Kvurt, A. V. Doroshenko, and V. G. Gaidai, Izv. VUZov, Khim. Khim. Tekhnol.,29, No. 10, 117–120 (1986).
E. M. Sikorskaya, “Hydrodynamics and kinetics of processes of contact processing of gases and liquids in film-type apparatuses with packed beds in counter- and cross-flow contact,” Cand. Thesis, Odessa (1986).
A. V. Doroshenko, V. B. Vistyak, and V. G. Gaidai, Kholod. Tekhn., No. 4, pp. 34–38 (1987).
A. V. Doroshenko, Yu. R. Yarmolovich, and Yu. I. Dem'yanenko, Kholod. Tekhn., No. 12, 23–27 (1987).
Additional information
Odessa Institute of Low-Temperature Technology and Power Engineering. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 69, No. 2, pp. 279–284, March–April, 1996.
Rights and permissions
About this article
Cite this article
Kirillov, V.K., Doroshenko, A.V. & Logacheskii, V.I. Critical velocity of gas in heat and mass transfer equipment. J Eng Phys Thermophys 69, 224–228 (1996). https://doi.org/10.1007/BF02607948
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02607948