Abstract
Corrosion resistance of amorphous Fe72Cr8-xAlxP13C7 ribbons produced by a rapid quenching method has been investigated in several solutions. The corrosion test for amorphous ribbons was carried out, and anodic polarization curves have been measured in the solutions. Resultantly, even in the amorphous Fe72Cr8-xAlxP13C7 ribbons containing a low Cr content, this composition of amorphous alloys showed the high corrosion resistance.
Similar content being viewed by others
References
T. Masumoto and R. Maddin:Acta Metallurgica, 1971, vol. 19, p. 725.
K. Hashimoto and M. Hara:Denki Kagaku, 1981, vol. 49, p. 446.
A. Yokoyama, H. Komiyama, H. Inoue, T. Masumoto, and H. Kimura:The 4th International Conference on Rapidly Quenching Metals, 1981, to be published.
M. Naka, K. Hashimoto, and T. Masumoto:J. JIM, 1974, vol. 38, p. 835.
M. Naka, K. Hashimoto, A. Inoue, and T. Masumoto:J. Non-Crystalline Solids, 1979, vol. 31, p. 347.
K. Hashimoto, M. Naka, K. Asami, and T. Masumoto:Corrosion Science, 1979, vol. 19, p. 165.
K. Hashimoto, K. Asami, M. Naka, and T. Masumoto:Sci. Rep. RITU, 1979, vol. A27, p. 237.
K. Asami, M. Naka, K. Hashimoto, and T. Masumoto:J. ElectroChem. Soc., 1980, vol. 127, p. 2130.
H. H. Liebermann and C. D. Graham:IEEE Trans. Mag., 1976, vol. Mag-12, p. 921.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cho, K., Hwang, CH., Ryeom, YJ. et al. Corrosion behavior of amorphous fe-cr-al-p-c ribbon alloys. Metall Trans A 13, 901–905 (1982). https://doi.org/10.1007/BF02642404
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02642404