References
N.J.I. Adams:Eng. Fract. Mech., 1972, vol. 4, pp. 543–54.
W. L. Morris:Metall. Trans. A, 1977, vol. 8A, pp. 589–96.
R.O. Ritchie, S. Suresh, and C.M. Moss:Trans. ASME-J. Eng. Matls, and Tech., 1980, vol. 102, pp. 293–99.
S. Suresh, G. F. Zamiski, and R.O. Ritchie:Metall. Trans. A, 1981, vol. 12A, pp. 1435–43.
M.D. Hallidy and C.J. Beevers:J. Test. Eval., 1981, vol. 9, pp. 195–201.
R.O. Ritchie and S. Suresh:Metall. Trans. A, 1982, vol. 13A, pp. 937–40.
M. H. El Haddad, N. E. Dowling, T. H. Topper, and K. N. Smith:Int. J. Fract., 1980, vol. 16, pp. 15–30.
M. H. El Haddad, T. H. Topper, and K. N. Smith:Eng. Fract. Mech., 1979, vol. 11, pp. 573–84.
N. E. Dowling:Cyclic Stress-Strain and Plastic Deformation Aspects of Fatigue Crack Growth, ASTM STP-637, Am. Soc. Test. Matls., Philadelphia, PA, 1977, pp. 97–121.
W.L. Morris, M.R. James, and O. Buck:Metall. Trans. A, 1981, vol. 12A, pp. 57–64.
C. Y. Yang and H. W. Liu:Scripta Met., 1980, vol. 14, pp. 785–90.
W. L. Morris, M. R. James, and O. Buck: “A Simple Model of Stress Intensity Range Threshold and Crack Closure Stress,”Eng. Fract. Mech., in press.
W. L. Morris, M. R. James, and O. Buck:Nondestructive Evaluation-Microstructural Characterization and Reliability Strategies, O. Buck and S.M. Wolf, eds., TMS-AIME, Warrendale, PA, 1981, pp. 387–99.
J. E. Hack and G. R. Leverant:Fatigue Microcrack Behavior Under the Influence of Surface Residual Stresses, Interim Report for Contract N00014-78-C-0674, 0NR NR 031-812, Southwest Research Institute, San Antonio, TX, October 1980.
F. W. Smith and D. R. Sorenson:Int. J. Fract., 1976, vol. 12, pp. 47–57.
C. G. Annis: Pratt and Whitney Aircraft Co., West Palm Beach, FL, private communication, 1981.
W.L. Morris and O. Buck:Metall. Trans. A, 1977, vol. 8A, pp. 597–601.
K. Tanaka, Y. Nakai, and M. Yamashita:Int. J. Fract., 1981, vol. 17, pp. 519–33.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
James, M.R., Morris, W.L. Effect of Fracture Surface Roughness on Growth of Short Fatigue Cracks. Metall Trans A 14, 153–155 (1983). https://doi.org/10.1007/BF02643749
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02643749