References
History of the University of Michigan, Ann Arbor, MI, 1966, p. 314.
The Michigan Alumnus, October 10, 1925, vol. 31, p. 38.
Z. Jeffries:Trans. Am. Soc. Steel Treating, 1928, vol. 13, p. 369.
M. E. Shank: ASTM STP 158, 1954, p. 48.
A.A. Griffith:Phil. Trans. Roy. Soc, 1920, vol. A221, p. 163.
P. Ludwik:Stahl Eisen, 1923, vol. 43, p. 1427.
N. P. Allen, W. P. Rees, Hopkins, and H. R. Tipler:J. Iron and Steel Inst., 1953, vol. 174, p. 103.
J. R. Low:Relation of Properties to Microstructure, ASM, Cleveland, OH, 1954, p. 103.
J. R. Low:Deformation and Flow of Solids, Springer Verlag, Berlin, 1956, p. 50.
W. S. Owen, B.L. Averbach, and M. Cohen:ASM Trans., 1958, vol. 50, p. 634.
G.T. Hahn, B.L. Averbach, W. S. Owen, and M. Cohen:Fracture, B.L. Averbachet al., eds., John Wiley and Sons, New York, NY, 1959, p. 91.
C. J. McMahon and M. Cohen:Acta Metall., 1965, vol. 13, p. 591.
C. Zener:Fracturing of Metals, ASM, Cleveland, OH, 1948, p. 3.
A. N. Stroh:Advances in Physics, 1957, vol. 6, p. 418.
N.J. Petch:J. Iron and Steel Inst., 1953, vol. 174, p. 25.
E. Smith:Proc. Conf. Physical Basis of Yield and Fracture, Inst. of Physics and Physical Soc, Oxford, 1966, p. 36.
E. A. Almond, D.H. Timbres, and J. D. Embury:Proc. 2nd Int. Conf. on Fracture, P.L. Pratt, ed., London, Chapman and Hall, 1969, p. 253.
D. M. Hodgson and A. S. Tetelman:Proc. 2nd Int. Conf. on Fracture, P. L. Pratt, ed., London, Chapman and Hall, 1969, p. 266.
D. A. Curry and J. F. Knott:Metal Science, 1978, vol. 12, p. 511.
D. A. Curry and J. F. Knott:Metal Science, 1979, vol. 13, p. 341.
A.R. Rosenfield, E. Votava, and G.T. Hahn:Trans. ASM, 1968, vol. 61, p. 807.
D. A. Porter, K. E. Easterling, and G.D.W. Smith:Acta Metall., 1978, vol. 26, p. 1405.
G.K. Bouse, I.M. Bernstein, and D.H. Stone: ASTM STP 644, 1978, p. 145.
Y. J. Park and I. M. Bernstein:Metall. Trans. A, 1979, vol. 10A, p. 1653.
A. Kamada, N. Koshizuka, and T. Funakoshi:Trans. Iron and Steel Inst. of Japan, 1976, vol. 16, p. 407.
P. Brozzo, G. Buzzichelli, A. Mascanzoni, and M. Mirabile:Metal Science, 1977, vol. 11, p. 123.
H. Kotilainen:Fracture and Fatigue, J. C. Radon, ed., Pergamon Press, 1980, p. 217.
H. Kotilainen, K. Torronen, and P. Neonen:Advances in Fracture Research, D. Francois, ed., Pergamon Press, 1982, vol. 2, p. 723.
H. Ohtani, F. Terasaki, and T. Kunitake:Trans. Iron and Steel Inst. of Japan, 1972, vol. 12, p. 118.
L. A. Norstrom and O. Vingsbo:Metal Science, 1979, vol. 13, p. 677.
M.L. Jokl, J. Kameda, C.J. McMahon, Jr., and V. Vitek:Metal Science, 1980, vol. 14, p. 375.
J. Kameda and C. J. McMahon, Jr.:Metall. Trans. A, 1980, vol. 11A, p. 91.
R. O. Ritchie, J. F. Knott, and J. R. Rice:J. Mech. Phys. Solids, 1973, vol. 21, p. 395.
J. R. Rice and R. Thomson:Phil. Mag., 1975, vol. 29, p. 73.
M.L. Jokl, V. Vitek, and C.J. McMahon, Jr.:Acta Metall., 1980, vol. 28, p. 1479.
M. Mullins and M. A. Dokainish:Phil. Mag., 1982, vol. 46, p. 771.
C.E. Hartbower: Reliability of the AASHTO Temperature Shift in Material Toughness Testing, FHA Report, Structural Engineering Series, No. 7, 1979.
R. Roberts and C. Newton: Weld. Res. Council Bulletin 265, 1981.
M. Gensamer:ASM Trans., 1946, vol. 36, p. 301.
H. Kotilainen: Ph.D. Dissertation, Helsinki University of Technology, Otaniemi, 1980.
P.L. Pratt:Metal Science, 1980, vol. 14, p. 363.
F.F. Lange:Phil. Mag., 1967, vol. 16, p. 761.
E.C. Frank and A.W. Stroh:Proc. Phys. Soc., 1952, vol. 65B, p. 811.
R.G. Hoagland, A.R. Rosenfield, P.C. Gehlen, and G.T. Hahn: ASTM STP 627, 1977, p. 177.
G. T. Hahn, R. G. Hoagland, J. Lereim, A. J. Markworth, and A. R. Rosenfield: ASTM STP 711, 1980, p. 289.
R.G. Hoagland, A.R. Rosenfield, and G.T. Hahn:Metall. Trnas., 1972, vol. 3, p. 123.
R. Pilkington and D. Hull:Cont. on Fracture Toughness, Iron and Steel Inst., 1968, vol. 20, p. 5.
J. R. Griffiths and D.R.J. Owen:J. Mech. Phys. Solids, 1971, vol. 19, p. 419.
G. D. Whitman and R. H. Bryan: Oak Ridge Nat. Lab. Report TM-8369V3, 1983, p. 20.
A. Inoue, T. Ogura, and T. Masumoto:Metall. Trans. A, 1977, vol. 8A, p. 1689.
E.O. Hall:Proc. Physical Soc, London, 1951, vol. B64, p. 747.
J. F. Knott:J. Iron and Steel Inst., 1966, vol. 204, p. 104.
G. Oates:J. Iron Steel Inst., 1969, vol. 207, p. 353.
D. A. Curry and J. F. Knott:Metal Science, 1976, vol. 10, p. 1.
J.F. Knott:J. Mech. Phys. Solids, 1967, vol. 15, p. 97.
T.R. Wilshaw:J. Iron Steel Inst., 1966, vol. 204, p. 936.
T. R. Wilshaw, A. Ran, and A. S. Tetelman:Eng. Fracture Mech., 1968, vol. 1, p. 191.
J. R. Low: Iron and Its Dilute Solid Solutions, Wiley, New York, NY, 1963, p. 255.
M. Holzman and J. Man:J. Iron and Steel Inst., 1971, vol. 209, p. 836.
J. D. G. Groom and J. F Knott:Metal Science, 1975, vol. 9, p. 390.
G.D. Fearnehough: M.Sc. Thesis, University of Manchester, 1964.
A. S. Argon, J. Im, and R. Safoglu:Metall. Trans. A, 1975, vol. 6A, p. 825.
T.C. Lindley, G. Oates, and C.E. Richards:Acta Metall., 1970, vol. 18, p. 1127.
A. S. Argon and J. Im:Metall. Trans. A, 1975, vol. 6A, p. 839.
J. Gurland:Acta Metall., 1972, vol. 20, p. 735.
R. O. Ritchie, W. L. Server, and R. A. Wullaert:Metall. Trans. A, 1979, vol. 10A, p. 1557.
J.M. Barson and S.T. Rolfe: ASTM STP 466, 1970, p. 281.
A.K. Shoemaker and S.T. Rolfe:Eng. Fracture Mech., 1971, vol. 2, p. 319.
W. W. Gerberich and Y. T. Chen:Metal Science, 1978, vol. 12, p. 151.
G.T. Hahn: Sc.D. Dissertation, M.I.T., 1959.
S. P. Rawal and J. Gurland:Metall. Trans. A, 1977, vol. 8A, p. 691.
R. Ritchie, B. Francis, and W.L. Server:Metall. Trans. A, 1976, vol. 7A, p. 831.
Additional information
The Edward DeMille Campbell Memorial Lecture was established
The Edward DeMille Campbell Memorial Lecture was established
The Edward DeMille Campbell Memorial Lecture was established
The Edward DeMille Campbell Memorial Lecture was established
The Edward DeMille Campbell Memorial Lecture was established
The Edward DeMille Campbell Memorial Lecture was established
G. T. HAHN, a native of Vienna, Austria, came to this country at the age
G. T. HAHN, a native of Vienna, Austria, came to this country at the age
G. T. HAHN, a native of Vienna, Austria, came to this country at the age
G. T. HAHN, a native of Vienna, Austria, came to this country at the age
G. T. HAHN, a native of Vienna, Austria, came to this country at the age
G. T. HAHN, a native of Vienna, Austria, came to this country at the age
Rights and permissions
About this article
Cite this article
Hahn, G.T. The Influence of Microstructure on Brittle Fracture Toughness. Metall Trans A 15, 947–959 (1984). https://doi.org/10.1007/BF02644685
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02644685