References
R.W. Guard and J.H. Westbrook:Trans.TMS-AIME, 1959, vol. 215, pp. 807–14.
O. Noguchi, Y. Oya, and T. Suzuki:Metall. Trans. A, 1981, vol. 12A, pp. 1647–53.
P. H. Thornton, R.G. Davies, and T. L. Johnston:Metall. Trans., 1970, vol. 1, pp. 207–18.
K. Aoki and O. Izumi:J. Mat. Sci., 1979, vol. 14, pp. 1800–46.
K. Aoki and O. Izumi:Kinzoko, 1979, vol. 49, pp. 38–41.
K. Aoki and O. Izumi:J. Japan Inst. Met., 1979, vol. 43, pp. 1190–96.
R. P. Messmer and C.L. Briant:Acta Metall., 1982, vol. 30, pp. 457–68.
R. A. Mulford: “Embrittlement of Structural Alloys”, Treatise on Materials Science and Technology, C.L. Briant and S. Banerji, eds., Academic Press, New York, NY, 1983, vol. 25, pp. 1–19.
S. C. Huang and A. M. Ritter:Proc. AIME Symposium Chemistry and Physics of Rapidly Solidified Materials, St. Louis, MO, October 26-27, 1982, B.J. Berkowitz and R.O. Scattergood, eds., TMS-AIME, Warrendale, PA, 1983, pp. 25–34.
A. I. Taub and J. L. Walter:Mat. Sci. Eng., in press.
E. M. Grala:Mechanical Properties of Intermetallic Compounds, J.H. Westbrook, ed., John Wiley and Sons, New York, NY, 1960, pp. 358–404.
A. Lawley:Intermetallic Compounds, J.H. Westbrook, ed., John Wiley and Sons, New York, NY, 1967, pp. 464–90.
C. T. Liu and C. C. Koch: “Technical Aspects of Critical Materials Use by the Steel Industry, Vol. IIB”, National Bureau of Standards,.NBSIR 83-2679-2, 1983, pp. 42-1 to 42-19; also editor’s note inIron Age, September 24, 1982, p. 63.
C.C. Koch, J.A. Horton, C.T. Liu, O.B. Cavin, and J.O. Scarbrough:Rapid Solidification Processing, Principles and Technologies III, R. Mehrabian, ed., National Bureau of Standards, 1983, pp. 264-69.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Taub, A.I., Huang, S.C. & Chang, K.M. Improved Strength and Ductility of Ni3Al by Boron Modification and Rapid Solidification. Metall Trans A 15, 399–402 (1984). https://doi.org/10.1007/BF02645128
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02645128