Abstract
Intergranular cavitation is an important consideration in the successful development of a commercially viable superplastic forming process for the high strength aluminum alloy, 7475. This work examined the microstructural features involved in the initiation stages of cavity formation. The observations suggest that, with the optimum superplastic deformation conditions, cavity nucleation is generally the rate determining step in the overall development of cavitation with strain. Cavities do not generally form at even the largest of the common single phase inclusion particles unless forming conditions are such that the flow stress significantly increases. It appears that, as well as local stress concentrations, additional effects are required, such as temperature induced particle decohesion and internal gas evolution, in order that cavities may grow to stable sizes. Such conditions may exist at certain two phase inclusion particles in the 7475 Al alloy. Suitable modifications to the standard alloy processing may therefore be devised which result in even lower rates of cavitation at the optimum superplastic forming conditions.
Similar content being viewed by others
References
J.A. Wert, N.E. Paton, C. H. Hamilton, and M.W. Mahoney:Metall. Trans. A, 1981, vol. 12A, p. 1267.
C. H. Hamilton: Rockwell International Science Center report for ARRADCOM, 1980, Contract No. DAAK10-78-C-0424, 1049 Camino Dos Rios, Thousand Oaks, CA.
M. W. Mahoney and C. H. Hamilton: Rockwell International Science Center report for AFWAL, 1981 Contract No. F33615-79-C-3218, 1049 Camino Dos Rios, Thousand Oaks, CA.
D. M. R. Taplin, G. L. Dunlop, S. Sagat, and R. H. Johnson:Proc. II, Int. American Conf. on Mat. Tech., Mexico City, ASME, New York, NY, 1970, vol. 1, p. 253.
S. Sagat, P. A. Blenkinsop, and D. M. R. Taplin:J. Inst. Metals, 1972, vol. 100, p. 268.
D.M.R. Taplin and S. Sagat:Mat. Sci. Eng., 1972, vol. 9, p. 153.
G. L. Dunlop, E. Shapiro, D. M. R. Taplin, and J. Crane:Metall. Trans., 1973, vol. 4, p. 2039.
C. W. Humphries and N. Ridley:J. Mat. Sci., 1974, vol. 9, p. 1429.
C.I. Smith and N. Ridley:Met. Tech., 1974, vol. 1, p. 191.
C.I. Smith, B. Norgate, and N. Ridley:Met. Sci., 1976, vol. 10, p. 182.
D.M.R. Taplin and R. F. Smith:Fracture 1977, 1CF4, Waterloo, Canada, vol. 2, p. 541.
D. W. Livesey and N. Ridley:Metall. Trans. A, 1978, vol. 9A, p. 519.
H. Ishikawa, D. G. Bhat, F. A. Mohamed, and T. G. Langdon:Metall. Trans. A, 1977, vol. 8A, p. 933.
N. Ridley and D.W. Livesey:Fracture 1977, 1CF4, Waterloo, Canada, vol. 2, p. 533.
B. Lehtinen and A. Melander:Metallography, 1980, vol. 13, p. 283.
C.H. Hamilton: Rockwell International Science Center, Report for U.S. Army Armament Research and Development Command, ARSCD-CRD-8001, 1049 Camino Dos Rios, Thousand Oaks, CA, February 1980.
N. A. Pratten:J. Mat. Sci., 1981, vol. 16, p. 1737.
M. W. Mahoney, C. H. Hamilton, and A. K. Ghosh: Rockwell International Science Center, Thousand Oaks, CA. Unpublished research, 1982.
P. R. Sperry and M. H. Bankard:ASM Metals Handbook, vol. 8, 8th edition, p. 120.
C. Renon and Calvet:Mem. Sci. Rev. Met., 1961, vol. 58, p. 835.
C.E. Ransley and D.E.J. Talbot:Z. Metallkunde, 1957, vol. 48, p. 73.
W. Eichenauer and A. Pebler:Z. Metallkunde, 1957, vol. 48, p. 373.
C.E. Ransley and H. Newfeld:J. Int. Met., 1948, vol. 74, p. 599.
D. E. J. Talbot and D. A. Granger:J. Int. Met., 1963, vol. 92, p. 280.
A.K. Ghosh and C.H. Hamilton:Proc. 5th Int. Conf. Strength of Metals and Alloys, Aachen, W. Germany, Pergamon Press, U.K., 1979, p. 905.
R. Butler: private communication, BACo Research Laboratories, Gerrards Cross, Bucks, England, 1979.
Author information
Authors and Affiliations
Additional information
C.C. BAMPTON, formerly at the Rockwell International Science Center
J.W. EDINGTON, formerly at the University of Delaware
Rights and permissions
About this article
Cite this article
Bampton, C.C., Edington, J.W. Microstructural observations of superplastic cavitation in fine grained 7475-Ai. Metall Trans A 13, 1721–1727 (1982). https://doi.org/10.1007/BF02647827
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02647827