Abstract
It is now well established that cavities are often formed during superplastic deformation. However, experimental investigations suggest important differences in the nature of the cavitation in typical superplastic metals and ceramics. These differences are demonstrated with reference to a superplastic Cu-based alloy and yttria-stabilized tetragonal zirconia (Y-TZP). By using a quantitative metallo-graphic procedure and scanning video images, measurements are presented showing the size, shape, and configuration of internal cavities in these two materials after deformation at high temperatures.
Similar content being viewed by others
References
B.P. Kashyap and A.K. Mukherjee:Res. Mechanica, 1986, vol. 17, pp. 293–355.
J. Pilling and N. Ridley:Res. Mechanica, 1988, vol. 23, pp. 31–63.
X.G. Jiang, J.C. Earthman, and F.A. Mohamed:J. Mater. Sci., 1994, vol. 29, p. 5499–5514.
F. Wakai, S. Sakaguchi, and Y. Matsuno:Adv. Ceram. Mater., 1986, vol. 1, pp. 259–63.
Y. Maehara and T.G. Langdon:J. Mater. Sci., 1990, vol. 25, pp. 2275–86.
A.H. Chokshi, A.K. Mukherjee, and T.G. Langdon:Mater. Sci. Eng., 1993, vol. R10, pp. 237–74.
T.G. Nieh and J. Wadsworth:Acta Metall Mater., 1990, vol. 38, pp. 1121–33.
K. Kajihara, Y. Yoshizawa, and T. Sakuma:Scripta Metall. Mater., 1993, vol. 28, pp. 559–62.
K. Kajihara, Y. Yoshizawa, and T. Sakuma:Acta Metall. Mater., 1995, vol. 43, pp. 1235–42.
Y. Ma and T.G. Langdon:Acta Metall. Mater., 1994, vol. 42, pp. 2753–61.
S.-A. Shei and T.G. Langdon:Acta Metall., 1978, vol. 26, pp. 639–46.
S.-A. Shei and T.G. Langdon:Acta Metall., 1978, vol. 26, pp. 1153–58.
S.-A. Shei and T.G. Langdon:J. Mater. Sci., 1978, vol. 13, pp. 1084–92.
S.-A. Shei and T.G. Langdon:J. Mater. Sci., 1981, vol. 16, pp. 2988–96.
A.H. Chokshi and T.G. Langdon:Acta Metall Mater., 1990, vol. 38, pp. 867–77.
Y. Ma, X. Zhao, and T.G. Langdon: inCreep and Fracture of Engineering Materials and Structures, B. Wilshire and R.W. Evans, eds., Institute of Metals, London, 1990, pp. 199–208.
N. Ridley, D.W. Livesey, and A.K. Mukherjee:J. Mater. Sci., 1984, vol. 19, pp. 1321–32.
M.J. Stowell, D.W. Livesey, and N. Ridley:Acta Metall., 1984, vol. 32, pp. 35–42.
J. Pilling:Mater. Sci. Technol, 1985, vol. 1, pp. 461–66.
B.P. Kashyap and K. Tangri:Metall. Trans. A, 1989, vol. 20A, pp. 453–62.
A.H. Chokshi and T.G. Langdon:J. Mater. Sci., 1989, vol. 24, pp. 143–53.
A.H. Chokshi and T.G. Langdon:Acta Metall., 1987, vol. 35, pp. 1089–1101.
Y. Ma and T.G. Langdon:Mater. Res. Soc. Symp. Proc, 1990, vol. 196, pp. 39–44.
Y. Ma and T.G. Langdon:Scripta Metall. Mater., 1992, vol. 26, pp. 1239–44.
Y. Ma and T.G. Langdon:Mater. Sci. Eng., 1993, vol. A168, pp. 225–30.
A.K. Ghosh: inDeformation of Polycrystals: Mechanisms and Microstructures, N. Hansen, A. Horsewell, T. Leffers, and H. Lilholt, eds., Risø National Laboratory, Roskilde, Denmark, 1981, pp. 277- 83.
C.H. Hamilton, A.K. Ghosh, and J.A. Wert:Met. Forum, 1985, vol. 8, pp. 172–90.
Author information
Authors and Affiliations
Additional information
This article is based on a presentation made at the “High Temperature Fracture Mechanisms in Advanced Materials” symposium as part of the 1994 Fall meeting of TMS, October 2-6, 1994, in Rosemont, Illinois, under the auspices of the ASM/SMD Flow and Fracture Committee.
Rights and permissions
About this article
Cite this article
Ma, Y., Langdon, T.G. The characteristics of cavitation in superplastic metals and ceramics. Metall Mater Trans A 27, 873–878 (1996). https://doi.org/10.1007/BF02649754
Issue Date:
DOI: https://doi.org/10.1007/BF02649754