Abstract
The influence of alloy grain size on growth rates of surface cracks 20 to 500 μm in length was studied in Al 7075-T6 specimens prepared in 12 and 130 μn grain sizes. Grain boundaries temporarily interrupt the propagation of cracks shorter than several grain diameters in length. Linear elastic fracture mechanics is inadequate to describe resulting average growth rates which must instead be characterized as a function of cyclic stress amplitude, σa, and alloy grain size as well as stress intensity range, σK. These observations are rationalized using two models, one that relates crack closure stress to alloy grain size, and a second that relates the development of microplasticity in a new grain in the crack path to grain size. In addition, growth rates were found to be faster in fully reversed loading than in tension-tension loading, especially in the large grained material. Evidence is presented to demonstrate that this is a consequence of the fatigue induced development of a compressive residual surface stress during tension-tension loading. These complex effects, and the role of grain size in determining short crack growth, are discussed.
Similar content being viewed by others
References
R. A. Smith:Int. J. Fracture, 1977, vol. 13, pp. 717–20.
M. H. El Haddad, K. N. Smith, and T. H. Topper:Trans. ASME-J. Eng. Materials and Technology, 1979, vol. 101, pp. 42–46.
S. Taira, K. Tanaka, and M. Hoshina: inFatigue Mechanisms, ASTM STP675,J.T. Fong,ed.,ASTM,Philadelphia,PA, 1979, pp. 135–73.
W.L. Morris:Metall. Trans. A, 1980, vol. 11A, pp. 1117–23.
C. Y. Yang and H. W. Liu:Scripta Met., 1980, vol. 14, pp. 785–90.
W.L. Morris, M.R. James, and O. Buck:Metall. Trans. A, 1981, vol. 12A, pp. 57–64.
G. P. Sheldon, T. S. Cook, J.W. Jones, and J. Lankford:Fat. Eng. Materials and Structures, 1981, vol. 3, pp. 219–28.
K. Tanaka, Y. Nakai, and M. Yamashita:Int. J. Fracture, 1981, vol. 17, pp. 519–33.
J. Lankford, T. S. Cook, and G. P. Sheldon:Int. J. Fract., 1981, vol. 17, pp. 143–55.
M. R. James and W. L. Morris:Metall. Trans. A, 1983, vol. 14A, pp. 153–55.
W.L. Morris, M. R. James, and O. Buck:Eng. Fract. Mech., 1983, vol. 18, no. 4, pp. 871–77.
W.L. Morris and M.R. James:Fatigue Mechanisms: Advances in Quantitative Measurement of Fatigue Damage, ASTM STP 811, J. Lankford, ed., ASTM, Philadelphia, PA, pp. 179–206, 1983.
J.A. Wert, N.E. Paton, C.H. Hamilton, and M.W. Mahoney:Metall. Trans. A, 1981, vol. 12A, pp. 1267–76.
J.A. Wert:Strength of Metals and Alloys, R.G. Gifkins, ed., Pergamon Press, Oxford, 1982, vol. 1, pp. 339–44.
M.R. James and J.B. Cohen:Treatise on Materials Science and Technology, H. Herman, ed., Academic Press, New York, NY, vol. 19A, pp. 1–62.
W. L. Morris, M. R. James, and O. Buck:Nondestructive Evaluation: Microstructural Characterization and Reliability Strategies, O. Buck and S.M. Wolf, eds., TMS-AIME, Warrendale, PA, 1980, pp. 387–99.
W. L. Morris, M. R. James, and O. Buck:Eng. Fract. Mech., 1980, vol. 13, pp. 213–21.
P. E. Bretz, A. K. Vasudevan, R. J. Bucci, and R. C. Malcolm: Final Report, N00019-79-C-0258, Alcoa Labs, Alcoa Center, PA, 1981.
J. Lankford:Fatigue of Engineering Materials and Structures, 1982, vol. 5, pp. 233–48.
R. Chang, W.L. Morris, and O. Buck:Scripta Metall., 1979,vol. 13, pp. 191–94.
W. L. Morris, R. V. Inman, and M. R. James:J. Materials Science, 1982, vol. 17, pp. 1413–19.
S. Pearson:Eng. Fract. Mech., 1975, vol. 7, pp. 235–47.
D. Taylor and J.F. Knott:Fat. of Eng. Materials and Structures, 1981, vol. 4, pp. 147–55.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zurek, A.K., James, M.R. & Morris, W.L. The Effect of Grain Size on Fatigue Growth of Short Cracks. Metall Trans A 14, 1697–1705 (1983). https://doi.org/10.1007/BF02654397
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02654397