Abstract
An empirical equation for the foaming index Σ of a CaO-SiO2-FeO slag was obtained by dimensional analysis. The effect of second-phase particles on slag foaming was well described by calculating the viscosity of the mixture using the modified Einstein equation. The anticipated foaming in basic oxygen furnace (BOF), electric arc furnace (EAF), and bath-smelting processes was estimated using the parameter Σ for various operating conditions and slag compositions. For BOF operations, it is predicted that foaming is most extreme in the middle of the blow, and a stable foam in EAF is achieved with less basic slags with low FeO contents. For bath smelting, foam heights of 5 m are possible, and a higher degree of prereduction prior to smelting will reduce foaming (because of smaller gas evolution) and possibly increase production rates. Running the process at a higher pressure will also reduce foam heights, because the volume of gas generated is less.
Similar content being viewed by others
References
K. Ito and R.J. Fruehan:Metall. Trans. B, 1989, vol. 20B, pp. 509–14.
CF. Cooper and J.A. Kitcher:JISI, Sept. 1959, vol. 193, pp. 48–55.
J.H. Swisher and CL. McCabe:Trans. TMS-A1ME, Dec. 1964, vol. 230, pp. 1669–75.
P. Kozakevitch:J. Metals, July 1969, pp. 57-68.
S. Hara, M. Dcuta, M. Kitamura, and M. Ogino:Tetsu-to-Hagané, 1983, vol. 69 (9), pp. 1152–59.
Y. Kawai, K. Mori, H. Shiraishi, and N. Yamada:Tetsu-to-Hagané, 1976, vol. 62 (1), pp. 53–61.
K. Gunji and T. Dan:Trans. ISIJ, 1974, vol. 14, pp. 162–69.
H. Hino, T. Ejima, and M. Kameda:Nippon-Kinzoku-Gakkaishi, 1967, vol. 31, pp. 113–19.
P. Kozakevitch:Rev. Met., 1949, vol. 46, pp. 505–15.
A.A. Gimmelfar:Izv. A.N. SSSR, Metall., 1968, p. 259.
J.J. Bikerman:Foams, Springer-Verlag, New York, NY, 1973, pp. 65–97 and 149–58.
B.J. Akers:Foams, Academic Press, London, 1976, pp. 1–38.
H.C Brinkman:J. Chem. Phys., 1952, vol. 20, p. 571.
J. Happel:J. Appl. Phys., 1957, vol. 28, pp. 1288–92.
P.M. Bills:JIS1, 1963, vol. 201, pp. 133–40.
K. Ito and R.J. Fruehan: 45th Electric Furnace Conf., Chicago, IL, Dec. 1987.
M.Sugata, T.Sugiyama, and S.Kondo:Tetsu-to-Hagané, 1972,
M. Tokuda:Tetsu-to-Hagané, 1985, vol. 71, p. S918
T. Harnada:Tetsu-tc,-Hagané, 1986, vol. 72, pp. 1991–2000.
F.Oeters: 5th int iron Steel Congress Washington, DC, April 1986.
R.J. Fruehan, K. Ito, and B . Ozturk, Trans.of ISS, I& SM, Nov. 1983, p. 83.
N. Tokumitsu, M. Matsuo H. Katayama, Y. Yamamoto, and Y. Hayashi: 7th Process Technology Division Conf., Toronto, April 1988.
Author information
Authors and Affiliations
Additional information
Kimihisa Ito, Research Associate, formerly with the Department of Metallurgical Engineering and Materials Science, Carnegie Mellon University
Rights and permissions
About this article
Cite this article
Ito, K., Fruehan, R.J. Study on the foaming of CaO-SiO2-FeO slags: Part II. Dimensional analysis and foaming in iron and steelmaking processes. Metall Trans B 20, 515–521 (1989). https://doi.org/10.1007/BF02654601
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02654601