Skip to main content
Log in

Studies on the thermal spraying of apatite bioceramics

  • Reviewed Paper
  • Published:
Journal of Thermal Spray Technology Aims and scope Submit manuscript

Abstract

Hydroxylapatite (HA) coatings on metal substrates have been investigated for many years. These coatings have proved to be compatible with bone. The degree of crystallinity of HA changed, and sometimes dissociation was observed with respect to the plasma spray process. However, the plasma spray process hardly altered the crystallographic structure, with only line broadening visible. Thein vitro solubility is dependent on the degree of crystallinity of the coating. Tensile strength measurements on the strength of the coating-substrate interface using various adhesives revealed a significant difference between epoxy resin and methacrylate. The failure mode of this tensile test was dependent on the coating thickness and surface texture (polished versus nonpolished). In animal studies, the fixation of hydroxylapatite plasma- spray coated cylinders as well as noncoated Ti- 6A1- 4V cylinders (Ti) in cortical bone was evaluated using pushout tests. It appeared that HA- coated implants showed higher push- out strengths in the first months than the titanium implants, because of the earlier bone formation against the HA coating.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. F. H. Albee, Studies in Bone Growth Triple Calcium Phosphate as a Stimulus to Osteogenesis,Ann. Surg., 71, (1920) 32–39.

    Article  Google Scholar 

  2. K.de Groot, CP.A.T. Klein, J.G.C. Wolke, J.M.A. de Blieck-Ho- gervorst, Chemistry of Calcium Phosphate Bioceramics,Handbook of Bioactive Ceramics, vol II, Yamamuroet al., Ed., CRC Press, Boca Raton, (1990)3–17.

    Google Scholar 

  3. K.de Groot, R.G.T. Geesink, C.P.A.T. Klein, and P. Serekian, Plasma Sprayed Coatings of Hydroxylapatite,J. Biomed. Mater. Res., 21, (1987) 1375–1381.

    Article  Google Scholar 

  4. S. D. Cook, K.A. Thomas, J.F. Kay, and M. Jarcho, Hydroxylapatite Coated Titanium for Orthopaedic Implant Applications,Clin. Or- thop. Rel. Res., 232, (1988) 225–243.

    CAS  Google Scholar 

  5. C. C. Berndt, G.N. Haddad, A.J.D. Farmer, and K.A. Gross, Ther- mal Spraying for Bioceramic Applications,Mater. Forum, 14, (1990) 161–173.

    CAS  Google Scholar 

  6. S. D. Davis, D.F. Gibbons, R.L. Martin, S.R. Levitt, I. Smith, and R. V. Harrington, Biocompatibility of Ceramic Implants in Soft Tis- sue,J. Biomed. Mater. Res., 6, (1972) 425.

    Article  CAS  Google Scholar 

  7. C.P.A.T. Klein, J.M.A. de Blieck-Hogervorst, J.G.C. Wolke, and K. de Groot, Solubility of Hydroxylapatite, Tricalcium Phosphate and Tetracalcium Phosphate Coatings on Titanium in vitro,Adv. Biomater, 9, (1990) 277–282.

    Google Scholar 

  8. C.P.A.T. Klein, J.M.A.de Blieck-Hogervorst, J.G.C. Wolke, and K. de Groot, Studies of the Solubility of Different Calcium Phosphate Particles in vitro,Biomaterials, 11, (1990) 509–513.

    Article  CAS  Google Scholar 

  9. ASTM C633, “Standard Method of Test for Adhesion or Cohesive Strength of Flame Sprayed Coatings,” 19th Annual Book of ASTM Standards, Part 17, ASTM, Philadelphia, (1969) 636-642.

  10. D. A. Hardwick, The Mechanical Properties of Thin Films: A Re- view,Thin Solid Films, 154, (1987) 109–124.

    Article  CAS  Google Scholar 

  11. E. Lugscheider, T. Weber, and M. Knepper, “Production of Biocom- patible Coatings of Hydroxylapatite and Fluorapatite,” National Thermal Spray Conference, Cincinnati, (1988) 332-343.

  12. M.M.A. Ramselaar, J.R. de Wijn, and J. van Mullen, “Resorption of 4 Ca Phosphates, in vitro Rates and Tissue Reactions,” Books of Abstract, Cl-6, 8th European Conference on Biomaterials, Euro- pean Society for Biomaterials, Heidelberg, 7-9 Sep (1989).

  13. W.J.A. Dhert, CP.A.T. Klein, J.G.C. Wolke, E.A. van der Velde, K. de Groot, and P.M. Rozing, A Mechanical Investigation of Fluora- patite, Magnesiumwhitlockite and Hydroxylapatite Plasma- Sprayed Coatings in Goats,J. Biomed. Mater. Res., 25, (1991) 1183–120.

    Article  CAS  Google Scholar 

  14. R.G.T. Geesink, K. de Groot, and C.P.A.T. Klein, Chemical Implant Fixation Using Hydroxyl-Apatite Coatings,Clin. Orthop., 225, (1987) 147–170.

    CAS  Google Scholar 

  15. C.P.A.T. Klein, P. Patka, H.B.M. van der Lubbe, J.G.C. Wolke, and K. de Groot, Plasma-Sprayed Coatings of Tetracalciumphosphate, Hydroxylapatite and Alpha-TCP on Titanium Alloy. An Interface Study,J. Biomed. Mater. Res., 25, (1991) 53–65.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wolke, J.G.C., de Blieck-Hogervorst, J.M.A., Dhert, W.J.A. et al. Studies on the thermal spraying of apatite bioceramics. JTST 1, 75–82 (1992). https://doi.org/10.1007/BF02657021

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02657021

Key words

Navigation