Abstract
The paper describes a mathematical model which predicts the meniscus shape and melt flow in an electromagnetic caster. Computations were carried out for the two types of caster (with and without a screen to shape the magnetic field) in commercial use. The dependence of meniscus shape on parameters such as inductor geometry, placement, current, and frequency, as well as screen properties and placement, was determined. Calculated velocities showed agreement with measurements of other investigators on a physical model and an actual caster. The effect of an auxiliary low frequency inductor on melt flow was also computed.
Similar content being viewed by others
References
R. Sautebin and W. Haller:Light Metals ’85, H.O. Bohner, ed., TMS-AIME, 1985.
Z. N. Getselev and G. Martynov:Magnit. Girodyn., 1978, no. 2, p. 127.
Z.N. Getselev:J. Metals, 1971, vol. 10, p. 38.
D. E. Tyler, B. G. Lewis, and P. D. Renschen:J. Metals, 1985, vol. 9, p. 51.
J.L. Meyer, J. Szekely, N. El-Kaddah, C. Vives, and R. Ricou:Metall. Trans. B, 1987, vol. 18B, pp. 539–48.
J. Szekely and K. Nakanishi:Metall. Trans. B, 1975, vol. 6B, p. 245.
J. Szekely and C. W. Chang:Ironmaking and Steelmaking, 1977, vol. 3, p. 190.
J. Szekely and C. W. Chang:Ironmaking and Steelmaking, 1977, vol. 3, p. 196.
N. El-Kaddah, J. Szekely, E. Taberlet, and Y. Fautrelle:Metall. Trans. B, 1986, vol. 17B, pp. 687–93.
N. El-Kaddah and J. Szekely:J. Fluid Mech., 1983, vol. 133, p. 37.
E. D. Tarapore and J.W. Evans:Metall. Trans. B, 1976, vol. 7B, p. 343.
E. D. Tarapore, J. W. Evans, and J. Langfeldt:Metall. Trans. B, 1977, vol. 8B, p. 179.
J.W. Evans and S.D. Lympany:Metall. Trans. B, 1983, vol. 14B, pp. 306–08.
J. N. Barbier, Y. R. Fautrelle, J. W. Evans, and P. Cremer:J. Mecan. Theo. et Appl., 1982, vol. 1, p. 533.
C. Vivès and R. Ricou:Metall. Trans. B, 1985, vol. 16B, pp. 227–35.
P. Cremer and A. Alemany:J. Mecan. Appl., 1981, vol. 5, p. 37.
S. Koanda: Thesis, Universite de Grenoble, France, 1982.
E. Taberlet: Thesis, Universite de Grenoble, France, 1984.
E.M. Dunn:Light Metals ’79, W. S. Peterson, ed., TMS-AIME, 1979.
J.D. Lavers:IEEE Trans. Industry Appl., 1A-17, 1981, vol. 7, p. 427.
J.D. Lavers:IEEE-IAS Conf. Proc, San Francisco, CA, 1982, p. 954.
C. Vivès and R. Ricou:Metall. Trans. B, 1985, vol. 16B, pp. 377–84.
W. Rodi:AIAA J., 1982, vol. 20, p. 872.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sakane, J., Li, B.Q. & Evans, J.W. Mathematical modeling of meniscus profile and melt flow in electromagnetic casters. Metall Trans B 19, 397–408 (1988). https://doi.org/10.1007/BF02657737
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02657737