Abstract
The chemical kinetics of a mechanically induced double displacement reaction exhibiting a self-sustaining combustion event have been investigated using differential thermal analysis. In particular, the effect of milling time on the activation energy for the reduction of cupric oxide by iron has been evaluated. It has been shown that the activation energy decreases from 575 kJ/mol at the start of milling to 199 kJ/mol at combustion. This is an indication that the rate-controlling step changes during milling from intrinsic ionic diffusion initially to diffusion down short-circuit pathways prior to combustion. It is suggested that this is dependent on the rate at which strain accumulates in milled powders and is hence a consequence of the mechanical alloying action.
Similar content being viewed by others
References
J.S. Benjamin:Metall. Trans., 1970, vol. 1, pp. 2943–51.
C. Politis:Physica. 1985, vol. 135B, pp. 286–89.
L. Schultz, J. Wecker, and E.J. Hellstern:J. Appl. Phys., 1987, vol. 61, pp. 3583–85.
J.K. Gregory, J.C. Gibeling, and W.D. Nix:Metall. Trans. A, 1985, vol. 16A, pp. 777–87.
C.C. Koch and M.S. Kim:J. Phys., 1985, vol. 46, pp. C8–573.
G.B. Schaffer and P.G. McCormick:Appl. Phys. Lett., 1989, vol. 55, pp. 45–46.
J.S. Benjamin and T.E. Volin:Metall. Trans., 1974, vol. 5, pp. 1929–34.
A.W. Weeber and H. Bakker:Physica B, 1988, vol. 153, pp. 93–110.
R.M. Davis, B. McDermott, and C.C. Koch:Metall. Trans. A, 1988, vol. 19A, pp. 2867–74.
C.C. Koch:Annu. Rev. Mater. Sci., 1989, vol. 19, pp. 121–43.
B.J.M. Aikin and T.H. Courtney:Metall. Trans. A, 1993, vol. 24A, pp. 647–57.
R.B. Schwarz and C.C. Koch:Appl. Phys. Lett., 1986, vol. 49, pp. 146–48.
D.R. Maurice and T.H. Courtney:Metall. Trans. A, 1990, vol. 21A, pp. 289–303.
B.J.M. Aikin, T.H. Courtney, and D.R. Maurice:Mater. Sci. Eng., 1991, vol. A147, pp. 229–37.
G.B. Schaffer and P.G. McCormick:Metall. Trans. A, 1992, vol. 23A, pp. 1285–90.
W.P. Gomes and W. Dekeyser: inTreatise on Solid State Chemistry, N.B. Hannay, ed.. Plenum Press, New York, NY, 1976, vol. 4, pp. 61–113.
Comprehensive Chemical Kinetics, C.H. Bamford and C.F.H. Tipper, eds, Elsevier Scientific, Amsterdam, 1980, vol. 22, pp. 247-82.
V.V. Boldyrev: inReactivity of Solids, K. Dyrek, J. Haber, and J. Nowotny, eds., Elsevier Scientific, Amsterdam, 1982, vol. 2, pp. 519–50.
G.B. Schaffer and P.G. McCormick:Metall. Trans. A, 1990, vol. 21A, pp. 2789–94.
J.H. Sharp: inDifferential Thermal Analysis, R.C. Mackenzie, ed., Academic Press, London, 1972, vol. 2, pp. 47–77.
W.W. Wendlandt:Thermal Analysis, 3rd ed. John Wiley and Sons, New York, NY, 1986, p. 269.
D.B. Wiles and R.A. Young:J. Appl. Crystallogr., 1981, vol. 14, pp. 149–51.
C.J. Howard and R.J. Hill: Report No. Ml 12, Australian Atomic Energy Commission, Sydney, Australia, 1986.
G. Varhegyi, G. Groma, and M. Lengyel:Thermochim. Acta, 1979, vol. 30, pp. 311–17.
H.J. Borchardt and F. Daniels:J. Am. Chem. Soc., 1957, vol. 79, pp. 41–46.
G.B. Schaffer and P.G. McCormick:Metall. Trans. A, 1991, vol. 22A, pp. 3019–24.
R.A. Rapp, A. Ezis, and G.J. Yurek:Metall. Trans., 1973, vol. 4, pp. 1283–92.
P.J. Harrop:J. Mater. Sci., 1968, vol. 3, pp. 206–22.
C.C. Koch:Nanostructured Mater., 1993, vol. 2, pp. 109–29.
G.B. Schaffer and P.G. McCormick:J. Mater. Sci. Lett., 1990, vol. 9, pp. 1014–16.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Forrester, J.S., Schaffer, G.B. The chemical kinetics of mechanical alloying. Metall Mater Trans A 26, 725–730 (1995). https://doi.org/10.1007/BF02663921
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02663921