Abstract
Directionally solidified Pb-20 wt pct Sn alloys of uniform microstructures were produced with various primary and secondary dendrite arm spacings. Permeabilities of these alloys were investigated with approximately 0.19 and 0.29 volume fraction liquid, for flow parallel to the direction of primary dendrite arms. The permeabilities of the samples with approximately 0.19 volume fraction liquid were also obtained for flow normal to the primary dendrite arms. It was found that for flow parallel to the primary dendrite arms, permeability varied with d 21 and g 2L (d1 is the primary arm spacing and gL is the volume fraction of liquid). There appears to be no relation between permeability for this parallel flow and the secondary dendrite arm spacing. For flow perpendicular to the primary dendrite arms, permeability is approximately 0.06 to 0.20 that for parallel flow, and in this case the permeability appears to be strongly dependent upon the secondary dendrite arm spacing.
Similar content being viewed by others
References
M.C. Flemings and G.E. Nereo:TMS-AIME, 1967, vol. 239, pp. 1449–61.
M.C. Flemings, R. Mehrabian, and G.E. Nereo:TMS-AIME, 1968, vol. 242, pp. 41–49.
M.C. Flemings and G.E. Nereo:TMS-AIME, 1968, vol. 242, pp. 50–55.
R. Mehrabian and M.C. Flemings:TMS-AIME, 1969, vol. 245, p. 2347.
R. Mehrabian, M.A. Keane, and M.C. Flemings:Metall. Trans., 1970, vol. 1, pp. 1209–20.
R. Mehrabian, M. A. Keane, and M.C. Flemings:Metall. Trans., 1970, vol. 1, pp. 3238–41.
S. Kou, D.R. Poirier, and M.C. Flemings:Electric Furnace Proceedings, Iron and Steel Society of AIME, New York, NY, 1977, vol. 35, pp. 221–28.
S. Kou, D. R. Poirier, and M.C. Flemings:Metall. Trans. B, 1978, vol. 9B, pp. 711–19.
S.D. Ridder, F. C. Reyes, S. Chakravorty, R. Mehrabian, J. D. Nauman, J. H. Chen, and H.J. Klein:Metall. Trans. B, 1978, vol. 9B, pp. 415–25.
T. Fujii, D. R. Poirier, and M. C. Flemings:Metall. Trans. B, 1979, vol. 10B, pp. 331–39.
D. N. Petrakis, M. C. Flemings, and D. R. Poirier:Modeling of Casting and Welding Processes, TMS-AIME, Warrendale, PA, 1981, pp. 313–32.
C.L. Jeanfils, J.H. Chen, and H.T. Klein: ibid., pp. 313–32.
S.D. Ridder, S. Kou, and R. Mehrabian:Metall. Trans. B, 1981, vol. 12B, pp. 435–47.
T. S. Piwonka and M.C. Flemings:TMS-AIME, 1966, vol. 236, pp. 1157–65.
D. Apelian, M. C. Flemings, and R. Mehrabian:Metall. Trans., 1974, vol. 5, pp. 2533–37.
N. Streat and F. Weinberg:Metall. Trans. B, 1976, vol. 7B, pp. 417–23.
T. Takahashi: U.S.-Japan Cooperative Science Program Seminar onSolidification Processing, Dedham, MA, June 26-29, 1983, National Science Foundation (USA) and Japan Society for Promotion of Science, pp. 45–0.
T. Okamoto, K. Murakami, and A. Shiraishi: ibid., pp. 97–12.
H. R. Thresh, A. F. Crawley, and D. W. G. White:TMS-AIME, 1968, vol. 242, pp. 819–22.
H.R. Thresh and A.F. Crawley:Metall. Trans., 1970, vol. 1, pp. 1531–35.
E. E. Underwood:Quantitative Stereology, Addison Wesley, Reading, MA, 1970, pp. 31–35.
Metals Handbook, T. Lyman, ed., 1948 ed., American Society for Metals, Cleveland, OH, p. 1238.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Nasser-Rafi, R., Deshmukh, R. & Poirier, D.R. Flow of interdendritic liquid and permeability in pb-20 Wt Pct Sn alloys. Metall Trans A 16, 2263–2271 (1985). https://doi.org/10.1007/BF02670426
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02670426