Abstract
Classification is an important tool for perception and can be found in numerous scientific disciplines. Several application areas of classification are described in the context of information modeling. The usefulness of classification for reuse resp. selection of reference models is emphasized. A methodology to systematically create classification systems will be introduced. Furthermore, a classification system for reference models will be developed with the aid of the proposed methodology. This classification system gives a comprehensive, but abstract survey of 26 reference models found in the literature.
Similar content being viewed by others
References
Bailey KD (1994)Typologies and Taxonomies—An Introduction to Classification Techniques. Thousand Oaks, CA, USA
Becker J (1995) Strukturanalogien in Informationsmodellen—Ihre Definition, ihr Nutzen und ihr Einfluss auf die Bildung der Grundsätze ordnungsmäßiger Modellierung (GoM). In: König W (ed)Wirtschaftsinformatik ’95—Wettbewerbsfähigkeit, Innovation, Wirtschaftlichkeit. Heidelberg, pp 133–150
Becker J (2001) Referenzmodel. In: Mertens P, Back A, Becker J, König W, Krallmann H, Rieger B, Scheer A-W, Seibt D, Stahlknecht P, Strunz H, Thome R, Wedekind H (eds)Lexikon der Wirtschaftsinformatik. Berlin et al., pp 399–400
Becker J, Holten R, Knackstedt R, Schütte R (2000) Referenz-Informationsmodellierung. In: Bodendorf F, Grauer M (eds)Verbundtagung Wirtschaftsinformatik 2000. Aachen, pp 86–109
Becker J, Rosemann M, Uthmann CV (2000) Guidelines of Business Process Modeling. In: Aalst W vd, Desel J, Oberweis A (eds)Business Process Management—Models, Techniques, and Empirical Studies. Berlin et al. 2000, pp 30–49
Becker J, Schütte R (1996)Handelsinformationssysteme. Landsberg/Lech
Bodendorf F (1999)Wirtschaftsinformatik im Dienstleistungsbereich. Berlin et al.
Braun M (1999)Ausdifferenzierung eines Componentware-PPS-Systems in Richtung auf Branchen und Betriebstypen. PhD Thesis, Universität Erlangen-Nürnberg, Erlangen-Nürnberg
Brenner W (1985)Entwurf betrieblicher Datenelemente—Ein Weg zur Integration von Informationssystemen. PhD Thesis, St. Gallen
Brombacher R, Hars A, Scheer A-W (1993) Informationsmodellierung. In: Scheer A-W (ed)Handbuch Informationsmanagement. Wiesbaden 1993, pp 173–188
Buchanan B (1979) Theory of library classification. London
DIN Deutsches Institut für Normung e. V. (2000)Geschäftsprozessgestaltung—Typisierung und Modellierung (DIN-Fachbericht 80). Berlin, Wien, Zürich
Fernandez EB, Yuan X (2000) Semantic Analysis Patterns. In: Laender AHF, Liddle SW, Storey VC (eds)Conceptual Modeling—ER 2000—19th International Conference on Conceptual Modeling, Salt Lake City, Utah, USA, October 9–12, 2000 Proceedings. Berlin et al. 2000, pp 183–195
Fettke P, Loos P (2001a) Ein Vorschlag zur Spezifikation von Fachkomponenten auf der Administrations-Ebene. In: Turowski K (ed)Modellierung und Spezifikation von Fachkomponenten: 2. Workshop im Rahmen der vertIS (verteilte Informationssysteme auf der Grundlage von Objekten, Komponenten und Agenten) 2001, Bamberg, Deutschland, 05. Oktober 2001, pp 95–104
Fettke P, Loos P (2001b)Fachkonzeptionelle Standardisierung von Fachkomponenten mit Ordnungssystemen—Ein Beitrag zur Lösung der Problematik der Wiederauffindbarkeit von Fachkomponenten. Working Papers of the Research Group Information Systems & Management, Paper 3. Chemnitz
Fettke P, Loos P (2001c) Zur Klassifikation von Patterns. In:Net.ObjectDays 2001 —Tagungsband, 10.–13. September 2001, Messekongresszentrum Erfurt, pp 251–252
Fowler M (1997)Analysis Patterns: Reusable Object Models. Menlo Park, CA
Frank U (1999) Conceptual Modelling as the Core of the Information Systems Discipline—Perspectives and Epistemological Challenges. In: Haseman WD, Nazareth DL (ed)Proceedings of the 5th Americas Conference on Information Systems (AMCIS 1999), August 13–15, 1999. Milwaukee, Wisconsin, pp 695–697
Gabler (2000)Gabler Wirtschaftslexikon. Vol 1, 15th ed, Wiesbaden
Gaus W (1995)Dokumentations- und Ordnungslehre—Theorie und Praxis des Information Retrieval. 2nd ed, Berlin et al.
Genero M, Jiménez L, Piattini M (2000) Measuring the Quality of Entity Relationship Diagrams. In: Laender AHF, Liddle SW, Storey VC (eds)Conceptual Modeling—ER 2000—19th International Conference on Conceptual Modeling, Salt Lake City, Utah, USA, October 9–12, 2000 Proceedings. Berlin et al., pp 513–526
GDV (2000)Die Anwendungsarchitektur der deutschen Versicherungswirtschaft. http://www.gdvonline.de/vaa/, access date: 2002-03-30.
Han T-D, Purao S, Storey VC (1999) A Methodology for Building a Repository of Object-Oriented Design Fragments. In: Akoka J, Bouzeghoub M, Comyn-Wattiau I, Métais E (eds)Conceptual Modeling—ER ’99—18th International Conference on Conceptual Modeling, Paris, France, November 15–18, 1999 Proceedings. Berlin et al., pp 203–217
Hars A (1994)Referenzdatenmodelle—Grundlagen effizienter Datenmodellierung. Wiesbaden (at the same time: PhD Thesis, Saarbrücken 1993)
Hars A, Heib R, Kruse C, Michely J, Scheer A-W (1992)Approach to Classification for Information Engineering—Methodology and Tool Specification. Veröffentlichungen des Instituts für Wirtschaftsinformatik, Heft 92. Saarbrücken
Hau M (2001)Das DATEV-Komponenten-Repository—Ein Beitrag zu Marktplätzen für betriebswirtschaftliche Software-Bausteine. FORWIN-Bericht-Nr.: FWN-2001-003. Bamberg
Hay DC (1996)Data Model Patterns—Conventions of Thought. New York, NY 1996
Hoffmann W, Scheer A-W, Backes R (1992)Konzeption eines Ereignisklassifikationssystems in Prozeßketten. Veröffentlichungen des Instituts für Wirtschaftsinformatik, Heft 94. Saarbrücken
Jost W (1993)EDV-gestützte CIM-Rahmenplanung. Wiesbaden (at the same time: PhD Thesis, Saarbrücken 1992)
KBSt (1997)Handlungsleitfaden—IT-gestützte Vorgangsbearbeitung. http://www.kbst.bund.de/ koopa/neues/vorgang/vorgang.html, access date: 2002-03-30.
Keller G, Teufel T (1998)SAP R/3 Process Oriented Implementation—Iterative Process Prototyping. Harlow et al.
Knoblich H (1972) Die typologiche Methode in der Betriebswirtschaftslehre.WiSt 1 (4): 141–147
Köbernik G (1999)Moderne Methoden für die Fertigungssteuerung bei Werkstattfertigung. Köln (at the same time: PhD Thesis, Chemnitz 1999)
Krampe D (1999)Wiederverwendung von Informationssystementwürfen—Ein fallbasiertes werkzeuggestütztes Ablaufmodell. Wiesbaden (at the same time: PhD Thesis, Basel 1998)
Kruse C (1996)Referenzmodellgestütztes Geschäftsprozeßmanagement—Ein Ansatz zur prozeßorientierten Gestaltung vertriebslogistischer Systeme. Wiesbaden (at the same time: PhD Thesis, Saarbrücken 1995)
Kurbel K (1999)Produktionsplanung und-steuerung. Methodische Grundlagen von PPS-Systemen und Erweiterungen. 4th ed., München, Wien
Lang K (1997)Gestaltung von Geschäftsprozessen mit Referenzprozeßbausteinen. Wiesbaden (at the same time: PhD Thesis, Erlangen-Nürnberg 1996)
Lang, K, Taumann W, Bodendorf F (1996) Business Process Reengineering with Reusable Reference Process Building Blocks. In: Scholz-Reiter B; Stickel E (eds)Business Process Modelling. Berlin et al., pp 264–290
Lindland O I, Sindre G, Sølvberg A (1994) Understanding Quality in Conceptual Modeling.IEEE Software (3): 42–49
Lindtner P (1992)Domänenwissen in Methoden zur Analyse betrieblicher Informationssysteme. PhD Thesis, St. Gallen 1992.
Loos P (1992)Datenstrukturierung in der Fertigung. München, Wien (at the same time: PhD Thesis, Saarbrücken 1992)
Loos P (1997)Produktionslogistik in der chemischen Industrie—Betriebstypologische Merkmale und Informationsstrukturen. Wiesbaden (at the same time: Habilitation Thesis, Saarbrücken 1997)
Loos P, Scheer A-W (1995) Vom Informationsmodell zum Anwendungssystem—Nutzenpotentiale für den effizienten Einsatz von Informationssystemen. In: König W (ed)Wirtschaftsinformatik ’95—Wettbewerbsfähigkeit, Innovation, Wirtschaftlichkeit. Heidelberg, pp 185–201
Maier R (1996)Qualität von Datenmodellen. Wiesbaden (at the same time: PhD Thesis, Koblenz 1996)
Malone TW, Crowston K, Lee J, Pentland B, Dellarocas C, Wyner G, Quimby J, Osborn CS, Bernstein A, Herman G, Klein M, O’Donnell E (1999) Tools for inventing organizations. Toward a handbook of orgnaizational processes.Management Science 45 (3): 425–443
Marent C (1995a) Branchenspezifische Referenzmodelle für betriebswirtschaftliche IV-Anwendungsbereiche.Wirtschaftsinformatik 37 (3): 303–313
Marent C (1995b)Werkzeuggestützte Referenzmodellierung für den Handel., PhD Thesis, Wien
Marshall C (1999)Enterprise Modeling with UML: Designing Successful Software through Business Analysis. Reading, MA
Meffert H (1991)Marketing—Grundlagen der Absatzpolitik. Mit Fallstudien Einführung und Relaunch des VW-Golf. 7th ed, Weisbaden
Mertens P (2000)Integrierte Informationsverarbeitung 1. Administrations- und Dispositionssysteme in der Industrie. 12th ed, Wiesbaden
Mertens P, Griese J (2000)Integrierte Informationsverarbeitung 2. Planungs- und Kontrollsysteme in der Industrie. 8th ed, Weisbaden
Mertens P, Holzner J, Ludwig P (1996)Individual- und Standardsoftware: tertium datur? Betriebswirtschaftliche Anwendungsarchitekturen mit branchen- und betriebstypischen Zuschnitt. FORWISS-Report FR-1996-004. Erlangen, München, Passau
Mertens P, Lohmann M (2000) Branche oder Betriebstyp als Klassifikationskriterien für die Standardsoftware der Zukunft?—Erste Überlegungen, wie künftig betriebswirtschaftliche Standardsoftware entstehen könnte. In: Bodendorf F, Grauer M (ed)Verbundtagung Wirtschaftsinformatik 2000. Aachen, pp 110–136
Meyer zu Selhausen H (2000)Bank-Informationssysteme—Eine Bankbetriebswirtschaftslehre mit IT-Schwerpunkt. Stuttgart
Mišic VB, Zhao JL (2000) Evaluating the Quality of Reference Models. In: Laender AHF, Liddle SW, Storey VC (ed)Conceptual Modeling—ER 2000—19th International Conference on Conceptual Modeling, Salt Lake City, Utah, USA, October 9–12, 2000 Proceedings. Berlin, pp 484–498
Mittelstraß J (1995)Enzyklopädie Philosophie und Wissenschaftstheorie. Vol 2: H-O, Stuttgart, Weimar
Moody DL (1998) Metrics for Evaluating the Quality of Entity Relationship Models. In: Ling TW, Ram S, Lee ML (eds)Conceptual Modeling—ER ’98—,17th International Conference on Conceptual Modeling, Singapore, November 16–19, 1998, Proceedings. Berlin, pp 211–225
Moody DL, Shanks GG, Parke P (1998) Improving the Quality of Entity Relationship Models— Experience in Research and Practice. In: Ling TW, Ram S, Lee LM (eds)Conceptual Modeling —ER ’98—17th, International Conference on Conceptual Modeling, Singapore, November 16–19, 1998, Proceedings. Berlin, pp 255–276
Morschheuser P (1998)Individualisierte Standardsoftware in der Industrie—Merkmalsbasierte Anforderungsanalyse für die Informationsverarbeitung. Wiesbaden 1998 (at the same time: PhD Thesis, Erlangen-Nürnberg 1998, published as: Ludwig P: Die Analyse des Zusammenhangs zwischen Unternehmensmerkmalen und-anforderungen)
Rautenstrauch C (1997)Fachkonzept für ein intergriertes Produktions-, Recyclingplanungs- und Steuerungssystem (PRPS-System). Berlin, New York (at the same time: Habilitation Thesis, Münster 1996)
Remme M (1997)Konstruktion von Geschäftsprozessen—Ein modellgestützter Ansatz durch Montage generischer Prozeßpartikel. Wiesbaden (at the same time: PhD Thesis, Saarbücken 1996)
Rinschede M (1995)Koordination dezentraler Leitstände auf Basis objektorientierter Softwaretechnologie. Sinzheim (at the same time: PhD Thesis, Münster 1995)
Rising L (2000)The Pattern Almanac 2000 Boston
Rohloff M (1995)Produktionsmanagement in modularen Organisationsstrukturen. Reorganisation der Produktion und Objektorientierte Informationssysteme für verteilte Planungssegmente. München, Wien (at the same time: PhD Thesis, Technische Universität München 1994)
Ropohl G (1972a) Grundlagen und Anwendungsmöglichkeiten der morphologischen Methode in Forschung und Entwicklung (Teil 1).WiSt 1 (11): 495–499
Ropohl G (1972b) Grundlagen und Anwendungsmöglichkeiten der morphologischen Methode in Forschung und Entwicklung (Teil 2).WiSt 1 (12): 541–546
Rosemann M (1995)Erstellung und Integration von Prozeßmodellen—Methodenspezifische Gestaltungsempfehlungen für die Informationsmodellierung. PhD Thesis, Münster
Scheer A-W (1994)Business Process Engineering—Reference Models for Industrial Companies. 2nd ed, Berlin
Scheer A-W (1998a)ARIS—Business Process Frameworks. 2nd ed., Berlin et al. 1998a.
Scheer A-W (1998b)ARIS—Business Process Modeling. 2nd ed., Berlin et al. 1998b.
Scheer A-W, Hars A (1992) Extending Data Modeling to Cover the Whole Enterprise.Communications of the ACM 35 (9): 166–172
Scheer A-W, Nüttgens M (2000) ARIS Architecture and Reference Models for Business Process Management. In: Aalst W vd, Desel J, Oberweis A (eds)Business Process Management—Models, Techniques, and Empirical Studies. Berlin, pp 376–389
Schildheuer G (1998)Konzeption eines objektorientierten Referenzmodells zur Planung und Gestaltung eines umfassenden Qualitätsinformationssystems. Bochum (at the same time: PhD Thesis, Bochum 1997)
Schlagheck B (2000)Objektorientierte Referenzmodelle für das Prozess- und Projektcontrolling—Grundlagen—Konstruktion —Anwendungsmöglichkeiten. Wiesbaden (at the same time: PhD Thesis, Münster 1999)
Scholz-Reiter B (1990)CIM—Informations- und Kommunikationssysteme. München, Wien (at the same time: PhD Thesis, TU Berlin 1990)
Schütte R (1998)Grundsätze ordnungsmäßiger Referenzmodellierung—Konstruktion konfigurations-und anpassungsorientierter Modelle. Wiesbaden (at the same time: PhD Thesis, Münster 1997)
Schwegmann A (1999)Objektorientierte Referenzmodellierung—Theoretische Grundlagen und praktische Anwendung. Wiesbaden (at the same time: PhD Thesis, Münster 1999)
Shaw M, Clements P (1997)A Field Guide to Boxology: Preliminary Classification of Architectural Styles for Software Systems. Proceedings COMPSAC 97, 21st Intern Computer Software and Applications Conference. pp 6–13
Silverston L (2001a)The Data Model Resource Book, vol 1, A Library, of Universal Data Models for All Enterprises. rev ed, New York
Silverston L (2001b)The Data Model Resource Book, vol 2, A Library of Universal Data Models by Industry Types. rev ed, New York
United Nations (1989)International Standard Industrial Classification of All Economic Activities, 3rd Revision (ISIC, Rev 3). http://unstats.un.org/unsd/cr/family2.asp?Cl=2, access date: 2002-07-01
Wedekind H (1993)Kaufmännische Datenbanken. Mannheim
Wohed P (2000) Tool Support for Reuse of Analysis Patterns—A Case Study. In: Laender AHF, Liddle SW, Storey VC (eds)Conceptual Modeling—ER 2000—19th International Conference on Conceptual Modeling, Salt Lake City, Utah, USA, October 9–12, 2000 Proceedings. Berlin, pp 196–209
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fettke, P., Loos, P. Classification of reference models: a methodology and its application. Information Systems and e-Business Management 1, 35–53 (2003). https://doi.org/10.1007/BF02683509
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02683509