Abstract
A general algorithm of implicit stress integration in viscoplasticity, based on the governing parameter method (GPM) is briefly presented. It is assumed that the associative viscoplastic constitutive relations are governed by the Perzyna formulation with a generalization suggested by Simo and Hughes. The algorithm is first applied to isotropic metals obeying the von Mises yield condition with mixed hardening and then, to orthotropic metals with a generalized Hill's yield condition including a mixed hardening assumption. Derivation of consistent tangent moduli is presented for both viscoplastic material models. The proposed computational procedures are efficient, since they reduce the problem of stress integration to the solution of one nonlinear equation, can use large time steps and are applicable to 2-D, 3-D, shell and beam structures. The tangent elastic viscoplastic matrix provides high convergence rate in the overall equilibrium iterations. Numerical examples illustrate the main characteristics of the developed computational procedures.
Similar content being viewed by others
References
Cristescu, N. D.;Gioda, G. (Eds.) 1994: Visco-plastic Behaviour of Geomaterials, Springer-Verlag, Wien-New York
Hornberger, K.;Stamm, H. 1989: An implicit integration algorithm with projection method for viscoplastic constitutive equations, Int. J. Num. Meth. Engng. 28: 2397–2421
Kojic, M.;Bathe, K. J. 1987a: The “effective-stress-function” algorithm for thermo-elasto-plasticity. Int. J. Num. Meth. Engng., 24: 1509–1532
Kojic, M.;Bathe, K. J. 1987b: Thermo-elastic-plastic and creep analysis of shell structures. Comp. Structures 26: 135–143
Kojic, M. 1992a: An implicit procedure for stress integration of a general anisotropic von Mises material, Proc. COMPLAS III, D.R.J. Owen, E. Hinton and E. Onate, Eds. 263–269
Kojic, M.; Vukicevic, M.; Slavkovic. R.: 1992b: An implicit procedure for stress integration in elastic-plastic deformation of the modified cam-clay material, Proc. COMPLAS III, D. R. J. Owen, E. Hinton and E. Onate, Eds. 929–934
Kojic, M. 1993a: A General Concept of Implicit Integration of Constitutive Relations for Inelastic Material Deformation (in Serbian), Center Sc. Research, Serbian Ac. Sc. and Arts and Univ. of Kragujevac, Kragujevac, Yugoslavia
Kojic, M. 1993b: Implicit stress integration for elastic-plastic deformation of von Mises material with mixed hardening. Theoretical and Applied Mechanics (Yugoslavian) 19: 59–71
Kojic, M.;Slavkovic, R.;Grujovic, N.;Vukicevic, M. 1994a: Implicit stress integration algorithm for the modified cam-clay material, Theoretical and Applied Mechanics 20: 95–118
Kojic, M.;Slavkovic R.;Zivkovic, M.;Grujovic, N. 1994b: SAN-Program for linear and nonlinear structural analysis, mass and heat transfer, Faculty of Mechanical Engineering, Kragujevac
Kojic, M.;Zivkovic, M.;Kojic, A. 1995a: Elastic-plastic analysis of orthotropic multilayered beam. Computers & Structures. 57: 205–211
Kojic, M.;Grujovic, N.;Slavkovic, R.;Kojic, A. 1995b: Solution procedure for elastic-plastic orthotropic multilayered pipe deformation under external load and internal pressure. AIAA Journal 33:2354–2358
Kojic, M.; Begovic, D.; Grujovic, N. 1995c: A computational procedure for implicit stress integration of anisotropic thermo-plastic and/or anisotropic creep constitutive relations of metals, in D. R. J. Owen, L. Onate and E. Hinton (Eds.), Computational Plasticity, Pineridge Press 249–259
Kojic, M.; Zivkovic, M.; Grujovic, N.; Slavkovic, R. 1995d: Elastic-plastic analysis of multilayered orthotropic pipe as a beam superelement with deformable cross-section, in D. R. J. Owen, L. Onate. and E. Hinton (Eds.), Computational Plasticity, Pineridge Press 2129–2140
Kojic, M.; Slavkovic, R.; Grujovic, N. Zivkovic, M. 1995e: Implicit stress integration procedure for the generalized cap model in soil plasticity, in D. R. J. Owen, L. Onate and E. Hinton (Eds.), Computational Plasticity, Pineridge Press 1809–1820
Kojic, M.; 1995f: On the implicit stress integration of viscoplastic constitutive relations by the governing parameter method (GPM), in D. R. J. Owen, L. Onate and E. Hinton (Eds.), Computational Plasticity, Pineridge Press 165–176
Kojic, M.; Grujovic, N.; Slavkovic, R.; Zivkovic, M. 1995g: A general anisotropic metal plasticity model-model definition and implicit stress integration procedure, submitted for publication
Kojic, M.; Grujovic, N.; Slavkovic, R.; Zivkovic, M. 1995h: A general orthotropic von Mises plasticity material model with mixed hardening—model definition and implicit stress integration procedure, submitted for publication
Ortiz, M.;Simo, J. C.;1986: An analysis of new class of integration algorithms for elastoplastic constitutive relations, Int. J. Num. Meth. Engng. 23, 353–366
Simo, J. C.;Taylor, R. L.;1985: Consistent tangent operators for rate independent elasto-plasticity. Comp. Meth. Appl. Mech. Engng. 48: 101–118
Simo, J. C.; Hughes, T. J. R. 1988: Elastoplasticity and Viscoplasticity—Computational Aspects, (manuscript), Stanford University
Slavkovic, R.;Zivkovic M.;Kojic, M. 1994: Enhanced 8-node three-dimensional solid 4-node shell elements with incompatible generalized displacements, Comm. Num. Meth. Engng. 10: 699–709
Author information
Authors and Affiliations
Additional information
Communicated by D. E. Beskos, 17 April 1996
Rights and permissions
About this article
Cite this article
Kojic, M. The Governing Parameter Method for implicit integration of viscoplastic constitutive relations for isotropic and orthotropic metals. Computational Mechanics 19, 49–57 (1996). https://doi.org/10.1007/BF02757783
Issue Date:
DOI: https://doi.org/10.1007/BF02757783