Abstract
Simulation of temperature distribution in a brake drum and determination of drum brake torque has been carried out using finite element methods. The simulated temperature distribution and the brake torque determined were compared with observations carried out using an inertia dynamometer with a data-logging system. There is good agreement between the predicted temperature distribution and the brake torque determined with the test results on the dynamometer.
Similar content being viewed by others
References
Ashworth F J, Sherbiny M E, Newcomb T P 1977.Proc. Inst. Mech. Eng. 191: 169–176.
Comini G, Del S, Lewis R W, Zienkiwicz O C 1974 Finite element analysis of nonlinear heat conduction including phase change.Int. J. Numer. Meth. Eng. 8: 613–624
Fazekas G A G 1953 Temperature gradients and heat stresses in brake drums.Trans. Soc. Automobile Eng. NY 61: 279–308
Highley F H 1971 Techniques for determining the thermal characteristics of brake drums and discs. SAE paper 710589, pp. 2020–2028
Morgan K, Lewis R W, Seetharamu K N 1981 Modelling heat flow and thermal stresses in ingot casting.Simulation 36: 55–63
Newcomb T P 1958–59 Transient temperatures in brake drum and linings.Proc. Inst. Mech. Eng. 7: (a) 224–227, (b) 227–284
Newcomb T P 1963 Friction surface area required in brakes.Engineering 195: 28
Ramachandra Rao V T V S 1988Analytical and experimental investigation on drum and disc brakes. Ph D thesis. Indian Institute of Technology, Madras
Ramachandra Rao V T V S, Ramasubramanian H, Seetharamu K N 1985 Simulation of temperature distribution in drum brake—comparison by measurements.Proc. NUMETA’85 Conference, Swansea, pp. 841–845
Ramachandra Rao V T V S, Subramani D A 1993 Pressure distribution in disc brakes between rotor and pads. (communicated)
Sisson A E 1978 Thermal analysis of vented brake rotors. SAE paper 780352, pp. 1685–1694
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rao, V.T.V.S.R., Rajaram, L.S. & Seetharamu, K.N. Temperature and torque determination in brake drums. Sadhana 18, 963–983 (1993). https://doi.org/10.1007/BF03028388
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF03028388