This is a preview of subscription content, log in via an institution to check access.
References
J.A. Brooks and M.I. Baskes, “Weld Microsegregation Characterization and Modeling.”
M.J. Ceislak, T.J. Headley and A.D. Romig, “Solidification and Transformation Reactions in Hastelloy C-Type Alloys.”
D. Walsh, R. Campbell, G.D. Lo and W.F. Savage, “Solidification Behavior of Weld Craters in Various Materials.”
V.P. Kujanpaa, “Formation of Centerline Defects in Austenitic Stainless Steel Sheets and Strip.”
Y. Le and S. Kou, “Formation of Three Types of New Grains in the Weld Metal.”
K.E. Easterling, “Predicting Heat Affected Zone Microstructures and Properties in Fusion Welds.”
R.P. Martukanitz, “Modeling the Heat-Affected Zone of Aluminum Arc Welds.”
J.R. Yang and H.K.D.H. Bhadeshia, “Thermodynamics of the Accicular Ferrite Transformation.”
J.K. Brownless, D.K. Matlock and G.R. Edwards, “Effects of Aluminum and Titanium on the Microstructure and Properties of Microalloyed Steel Weld Metal.”
D.W. Yu, H.S. Ann, J.H. Devletian and W.E. Wood, “Influence of Low Alloy Filler Metal on Solidification and Ferrite Transformation in ESW.”
J.C. Lippold and B.C. Odegard, “Microstruc-tural Characteristics of Austenitic Stainless Steel Friction Welds.”
M. Hosseinioun, “Parent Plate Deformation and Restraining Conditions on the Formation and Morphology of Delta Ferrite in Welds.”
D.G. Howden and L.S. Yen, “Hydrogen Induced Worm Hole Porosity in Stainless Steel Weld Metal.”
R.A. Nichting and E.L. Brown, “Microstructural Evolution in the HAZ of a Submerged Arc Welded Microalloyed Steel.”
L. Dorn, “Determination of Weld Structure Properties by Means of the Microshear Test.”
R.G. Thompson, A.C. Nunes and M.L. Callaghan, “Microcrack Formation and Fatigue Initiation in the Heat Affected Zone of Nickel Alloy Welds.”
R. Viswanathan, R.H. Ryder, D.A. Roberts and M. Prager, “Dissimilar Weld Failure Analysis and Development.”
J. Goldak, A. Oddy, M. McDill and M. Bibby, “Progress in Computing Residual Stress and Strain in Welds.”
K. Masubucki, A. DeBiccari and W.J.C. Cook, “Non-Contact Measurement of Out-of-Plane Distortion as a Means for Controlling Distortion in Welded Structures.”
S.A. Chavez, V.A. Deason and J.S. Epstein, “Use of Moire Interferometry on Weldments.”
C.A. Hon and C.L.T. Sai, “A Methodology for Analysing Welding Distortion of Tubular Frames.”
J.C. Danko, “Processes for Altering the Weld Residual Stresses in Austenitic Stainless Steel Piping.”
L. Muller, G. Terlinde and K.H. Schalbe, “Weld Joint Properties at Hyperbaric MIG/MAG-Welding.”
M. Nagae and N. Abe, “Creep Embrittlement of the Heat Affected Zone and Its Evaluation.”
C.L. Lundin, R. Menon and Z. Chen, “Post Weld Heat Treatment Cracking (SRC) in A710 (Ni-Cop) HSLA Precipitation Strengthened Steel.”
L. Devillers and D. Kaplon, “The Effect of Low Level Concentrations of Some Elements on the Microstructure and Toughness of S.A.W. C-Mn Steel Welds ”
H.S. Ann, D.W. Yu, J.H. Devletian and W.E. Wood, “Factors Affecting Weld Metal Microstructures and Properties of Electroslag Weldments.”
H. Kreye and G. Reiners, “Metallurgical Aspects and Applications of Friction Welding.”
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
David, S.A. Trends in Welding Research. JOM 38, 37–38 (1986). https://doi.org/10.1007/BF03257843
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03257843