Summary
To determine the state of progress in the major areas of titanium net-shape development a symposium was held at the AIME Annual Meeting in February 1984. Editor’s Note: The proceedings, Titanium Net-Shape Technologies edited by F.R. Froes, and D. Eylon, will be published by The Metallurgical Society of AIME in 1984. The following extended abstracts discuss some aspects of precision casting, isothermal forging, and powder metallurgy that have stimulated aerospace and industrial applications of titanium net-shape parts.
Similar content being viewed by others
References
S. Abkowitz, S. Fujishiro, D. Eylon, and F. H. Froes, “Ti Alloy Shapes from Elemental Blend Powder and Tensile and Fatigue Properties of Low Chloride Compositions,” to be published in Titanium Net Shape Technologies, TMS-AIME, 1984.
P. J. Andersen and P. C. Eloff, “Development of Higher Performance Blended Elemental Powder Metallurgy Ti Alloys,” Powder Metallurgy of Ti Alloys, edited by F. H. Froes and J. E. Smugeresky, TMS AIME, New York, N.Y., 1980, pp. 175–187.
P. R. Roberts and P. Lowenstein, “Titanium Alloy Powders by the Rotating Electrode Process,” ibid., pp. 21–35.
R. H. Witt and W. T. Highberger, “Hot Isostatic Pressing of Near-Net Titanium Structural Parts” ibid., pp. 225–265.
R. R. Boyer, R. Bajoraitis, W. H. Kao and R. D. Blunk, “Vacuum Hot Pressing of Large Near-Net Shape Spar Fittings,” Advanced Processing Methods for Titanium, edited by D. F. Hasson and C. H. Hamilton, TMS-AIME, 1982, pp. 41–59.
T. E. Miles and J. F. Rhodes, “Unique Powder Processing for Ultimate Shape and Properties,” Proceedings of the International Conference on Rapid Solidification Processes, November 13–16, 1977, Reston, Virginia, p. 347.
F. H. Froes and J. R. Pickens, “Powder Metallurgy of Light Metal Alloys,” J. Metals, 36(1) (1984), pp. 14–28.
F. H. Froes and D. Eylon, “Titanium PM Overview,” to be published in Titanium Net-Shape Technologies, TMS-AIME, 1984.
C. C. Chen and R. R. Boyer, “Practical Considerations for Manufacturing High Strength Ti-10V-2Fe-3Al Alloy Forgings,” J. Metals, 31(7) (1979), p. 33.
R. R. Boyer, unpublished research.
E. J. Kosinski, “The Mechanical Properties of Titanium P/M Parts Produced from Superclean Powders,” Progress in Powder Metallurgy 1982, MPIF/APMI, 1983.
D. B. Dawson and M. G. Ulitchny, “Characterization and Tensile Properties of Hot-Isostatically-Pressed Ti-6Al-6V-2Sn” Powder Metallurgy of Titanium Alloys, edited by F. H. Froes and John E. Smugersky, The Metallurgical Society of AIME, 1980.
Rights and permissions
About this article
Cite this article
Eylon, D., Froes, F.H. Titanium Net-Shape Technologies. JOM 36, 36–41 (1984). https://doi.org/10.1007/BF03338470
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03338470