Abstract
This work summarizes the findings of multi-objective optimization of a gravity sand-cast steel part for which an increase of casting yield via riser optimization was considered. This was accomplished by coupling a casting simulation software package with an optimization module. The benefits of this approach, recently adopted in the foundry industry worldwide and based on fully automated computer optimization, were demonstrated. First, analyses of filling and solidification of the original casting design were conducted in the standard simulation environment to determine potential flaws and inadequacies. Based on the initial assessment, the gating system was redesigned and the chills rearranged to improve the solidification pattern. After these two cases were evaluated, the adequate optimization targets and constraints were defined. One multi-objective optimization case with conflicting objectives was considered in which minimization of the riser volume together with minimization of shrinkage porosity and limitation of centerline porosity were performed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
MAGMAsoft simulation software, MAGMA GmbH, Aachen, Germany
Svensson, I.L., Seifeddine, S., Hattel, J.H., Thorborg, J., Kotas, P., “On Modelling of Microstructure Formation, Local Mechanical Properties and Stress-Strain Development in Aluminium Castings”, Proc. Int. Conf. On Modelling of Casting, Welding and Advanced Solidification Processes, MCWASP XII, Vancouver BC, Canada, pp. 129–136 (2009).
Seifeddine, S., Wéssen, M., Svensson, I.L., “Use of Simulation to Predict Microstructure and Mechanical Properties in an As-Cast Aluminium Cylinder Head: Comparison with Experiments”, Metallurgical Science & Technology, vol. 24, no. 2, pp. 27–33 (2007).
Herman, A., Marousek, L., “The Verification of Computer Simulation for High Pressure Casting Technology”, Technológia 2003. Bratislava: Faculty of Mechanical Engineering of the Slovak Technical University, p. 56 (2003).
Sturm, J., Hepp, E., Enger-Walter, A., “Integration of Casting Simulation into Crash Simulation” 20th CAD-FEM Users’ Meeting 2002, International Congress on FEM Technology, Lake Constance, Germany (2002).
Kotas, P., “Numerical Optimization of Die Filling and of High-Pressure Die Cast Deformation”, Master Thesis, Technical University of Denmark, Lyngby, Denmark (2007).
Hattel, J.H., Fundamentals of Numerical Modelling of Casting Processes, 1st ed., Kgs. Lyngby: Polyteknisk Forlag (2005).
Egner-Walter, A., “Prediction of Distortion in Thin-Walled Die Castings”, Casting Plant and Technology International, vol. 23, no. 1, pp. 24–33 (2007).
Monroe, C., Beckermann, C., “Deformation during Casting of Steel: Model and Material Properties”, in Proceedings of the 61st Technical and Operating Conference, SFSA, Chicago, IL (2007).
Poloni, C., Pediroda, V., GA Coupled with Computationally Expensive Simulations: Tools to Improve Efficiency, Chapter Genetic Algorithms and Evolution Strategies in Engineering and Computer Science, pp. 267–288. John Wiley and Sons (1997).
Fonseca, C., Fleming, P., “Genetic Algorithms for Multiobjective Optimization: Formulation, Discussion and Generalization”, In Genetic Algorithms, Proceedings of the 5th International Conference, USA, pp. 416–423 (1993).
MAGMAfrontier 4.4 Reference Manual (2005).
Hahn, I., Hartmann, G., “Automatic Computerized Optimization in the Die Casting Processes”, Casting Plant & Technology International, vol. 24, no. 4 (2008).
Gramegna, N., Baumgartner, P., Kokot, V., “Capabilities of New Multi-Objective Casting Process Optimization Tool”, IDEAL International Conference, Lecce, Italy (October 2005).
Kokot, V., Bernbeck, P., “Integration and Application of Optimization Algorithms with Casting Process Simulation”, Proc. Int. Conf. On Modelling of Casting, Welding and Advanced Solidification Processes, MCWASP X, Destin, Florida, pp. 487- 494 (May 2003).
Goldberg, D.E., Genetic Algorithms in Search, Optimization & Machine Learning, Addison Wesley Longmann, Inc., (1989).
Tutum, C.C., Hattel, J.H., “Optimization of Process Parameters in Friction Stir Welding Based on Residual Stress Analysis — A Feasibility Study”, Science and Technology of Welding and Joining (In Press).
Deb, K., Multi-Objective Optimization Using Evolutionary Algorithms, John Wiley & Sons, (2001).
Deb, K., “Unveiling Innovative Design Principles by Means of Multiple Conflicting Objectives”, Engineering Optimization, vol. 35, no. 5, pp. 445–470 (2003).
Tutum, C.C., “Optimization of Thermo-Mechanical Conditions in Friction Stir Welding”, PhD Thesis, Technical University of Denmark, ISBN 978-87-89502-89, (2009).
Sobol, I., “On the Systematic Search in a Hypercube”, SIAM Journal on Numerical Analysis, vol. 16, issue 5, pp. 790–793 (1979).
Niyama, E., Uchida, T., Morikawa, M., Saito, S., “Method of Shrinkage Prediction and its Application to Steel Casting Practice”, AFS Int. Cast. Met. J., vol. 7, no. 3, pp. 52–63 (1982).
Carlson, K.D., Beckermann, C., “Prediction of Shrinkage Pore Volume Fraction Using a Dimensionless Niyama Criterion”, Metallurgical and Materials Transactions A, vol. 40A, pp. 163–175 (2009).
Carlson, K.D., Ou, S., and Beckermann, C., “Feeding of High-Nickel Alloy Castings,” Metallurgical and Materials Transactions B, vol. 36B, pp. 843–856 (2005).
Jain, N., Carlson, K.D., Beckermann, C., “Round Robin Study to Assess Variations in Casting Simulation Niyama Criterion Predictions,” in Proceedings of the 61st Technical and Operating Conference, SFSA, Chicago. IL (2007).
Carlson, K.D., Ou, S., Hardin, R.A., Beckermann, C., “Development of a Methodology to Predict and Prevent Leaks Caused by Microporosity in Steel Castings,” in Proceedings of the 55th Technical and Operating Conference, SFSA, Chicago IL (2001).
Hardin, R.A., Ou, S., Carlson, K.D., Beckermann, C., “Development of New Feeding Distance Rules Using Casting Simulation; Part I: Methodology”, Metallurgical and Materials Transactions B, vol. 33B, pp. 731–740 (2002).
Campbell, J., Castings, Second Edition. Elsevier Butterworth-Heinemann (2003).
Wang, L., and Beckermann, C., “Prediction of Reoxidation Inclusion Composition in Casting of Steel”, Metallurgical and Materials Transactions B, vol. 37B, pp. 571–588 (2006).
Hansen, S.S., “Reduced Energy Consumption for Melting in Foundries”, PhD Thesis, Technical University of Denmark, ISBN 978-87-91035-63-5 (2007).
Beckermann, C., “Modelling of Macrosegregation: Applications and Future Needs”, Int. Mater. Rev., vol. 47, pp. 243–261 (2002).
Beeley, P., Foundry Technology, Second Edition, Butterworth — Heinemann, (2001).
Porter, D.A., Easterling, K.E., Phase Transformations in Metals and Alloys, Second Edition, Taylor & Francis Group (2004).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kotas, P., Tutum, C., Hattel, J. et al. A Casting Yield Optimization Case Study: Forging Ram. Inter Metalcast 4, 61–76 (2010). https://doi.org/10.1007/BF03355503
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03355503