Abstract
This paper presents a method for topology optimization of periodic structures using the bi-directional evolutionary structural optimization (BESO) technique. To satisfy the periodic constraint, the designable domain is divided into a certain number of identical unit cells. The optimal topology of the unit cell is determined by gradually removing and adding material based on a sensitivity analysis. Sensitivity numbers that consider the periodic constraint for the repetitive elements are developed. To demonstrate the capability and effectiveness of the proposed approach, topology design problems of 2D and 3D periodic structures are investigated. The results indicate that the optimal topology depends, to a great extent, on the defined unit cells and on the relative strength of other non-designable part, such as the skins of sandwich structures.
Similar content being viewed by others
References
Bendsøe MP (1989) Optimal shape design as a material distribution problem. Struct Optim 1:193–202
Chu DN, Xie YM, Hira A, Steven GP (1996) Evolutionary structural optimization for problems with stiffness constraints. Finite Elem Anal Des 21:239–51
Huang X, Xie YM (2007) Convergent and mesh-independent solutions for the bi-directional evolutionary structural optimization method. Finite Elem Anal Des, doi:10.1016/j.finel.2007.06.006
Mlejnek HP (1992) Some aspects of the genesis of structures. Struct Optim 5:64–69
Querin OM, Young, V, Steven, GP, Xie, YM (2000) Computational efficiency and validation of bi-directional evolutionary structural optimisation. Comput Methods Appl Mech Eng 189:559–573
Sigmund O (1994) Materials with prescribed constitutive parameters: an inverse homogenization problem. Int J Solids Struct 31(17):2313–2329
Sigmund O, Petersson J (1998) Numerical instabilities in topology optimization: a survey on procedures dealing with checkerboards, mesh-dependencies and local minima. Struct Optim 16:68–75
Sigmund O, Torquato S (1997) Design of materials with extreme thermal expansion using a three-phase topology optimization method. J Mech Phys Solids 45(6):1037–1067
Tanskanen P (2002) The evolutionary structural optimization method: theoretical aspects. Comput Methods Appl Mech Eng 191:5485–5498
Wadley HNG, Fleck NA, Evan AG (2003) Fabrication and structural performance of periodic cellular metal sandwich structures. Compos Sci Technol 63:2331–2343
Xie YM, Steven GP (1993) A simple evolutionary procedure for structural optimization. Comput Struct 49:885–896
Xie YM, Steven GP (1997) Evolutionary structural optimization. Springer, London
Yang XY, Xie, YM, Steven, GP, Querin, OM (1999) Bidirectional evolutionary method for stiffness optimization. AIAA Journal 37(11):1483–1488
Zhang W, Sun S (2006) Scale-related topology optimization of cellular materials and structures. Int J Numer Methods Eng 68:993–1011
Zhou M, Rozvany GIN (1991) The COC algorithm, part II: topological, geometry and generalized shape optimization. Comp Methods Appl Mech Eng 89:197–224
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Huang, X., Xie, Y.M. Optimal design of periodic structures using evolutionary topology optimization. Struct Multidisc Optim 36, 597–606 (2008). https://doi.org/10.1007/s00158-007-0196-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-007-0196-1