Skip to main content
SpringerLink
Log in

Strategic evolution of eco-products: a product life cycle planning methodology

  • Original paper
  • Published:
Research in Engineering Design Aims and scope Submit manuscript

Abstract

This paper presents a methodology and a software tool to establish an eco-design concept of a product and its life cycle by assigning appropriate life cycle options to the components of the product. The product life cycle planning (LCP) methodology provides the following systematic procedures. First, the medium- or long-term production and collection plan for the product family is clarified. Next, target values for the product and its life cycle are set in the process of determination of customer-oriented specification and eco-specification. Then, eco-solution ideas to realize reasonable resource circulation are generated by using various life cycle option analysis charts. Finally, an eco-design concept which involves eco-solution ideas is evaluated for decision-making at early stages of product development. A design support tool was made for efficiently planning product life cycles by using quality function deployment and life cycle assessment data. Based on case studies, it was verified that the proposed methodology and tool are useful for developing multi-generational eco-products.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15

Similar content being viewed by others

References

  • Beiter K, Ishii K (1999) Incorporating the voice of the customer in preliminary component design. Proceedings of the ASME 1999 Design Engineering Technical Conferences, ASME, DETC99/DTM-8908

  • Biswas G, Haftbaradaran H, Kawamura K, Hunkeler D, Lantz J, Shahinpoor M, Quinn T (1997) An environmentally conscious decision support system based on a streamlined LCA and a cost residual risk evaluation: fluorescent light bulb case study. Int J Environ Conscious Des Manuf 6(3):9–24

    Google Scholar 

  • Brezet H, Van Hemel C (1997) Eco-design: a promising approach to sustainable production and consumption. UN Environment Programme (UNEP)

  • Brink S, Diehl J, A Stevels (1998) ECO-QUEST, an ecodesign self audit tool for suppliers of the Electronics Industry. Proceedings of the 1998 IEEE International Symposium on Electronics and the Environment, IEEE, pp 129–132

  • Capra F, Pauli G (1995) Steering business toward sustainability. United Nations University Press, Tokyo

    Google Scholar 

  • Clausing D (1993) Total quality development. ASME Press, New York

    Google Scholar 

  • Coulter S, Bras B (1997) Reducing environmental impact through systematic product evolution. Int J Environ Conscious Des Manuf 6(2):1–10

    Google Scholar 

  • Coulter S, Bras B (1999) Decision support for systematic product evolution. Proceedings of the 1999 ASME Design Engineering Technical Conferences, ASME, DTEC99/DTM-8747

  • Dannheim F, Grüner C, Birkhofer H (1998) Human factors in design for environment. Proceedings of the 5th International Seminar on Life Cycle Engineering, CIRP, pp 13–24

  • Frei M, Züst R (1997) The eco-effective product design—the systematic inclusion of environmental aspects in defining requirements. In: Krause F-L, Seliger G (eds) Life cycle networks. Chapman& Hall, London, pp 163–173

    Google Scholar 

  • Goodkoop M, Spriensma R (2000) The Eco-Indicator 99, a damage-oriented method for life cycle impact assessment. Methodology Report

  • Graedel T, Allenby B (1995) Industrial ecology. Prentice Hall, Englewood Cliffs

    Google Scholar 

  • Hoshino T, Yura K, Hitomi K (1995) Optimization analysis for recycle-oriented manufacturing system. Int J Prod Res 33:2069–2078

    Article  MATH  Google Scholar 

  • ISO 14040 (1997) Environmental management—life cycle assessment—principles and framework. International Organization for Standardization

  • Itsubo N, Inaba A (2001) Development of endpoint-type methodology of LCIA in Japan. Proceedings of the 2nd International Symposium on Environmentally Conscious Design and Inverse Manufacturing, IEEE, pp 826–831

  • Johnson E, Gay A (1995) A practical customer-oriented DFE methodology. Proceedings of the 1995 IEEE International Symposium on Electronics and the Environment, IEEE, pp 47–50

  • Jones E, Stanton N, Harrison D (2001) Applying structured methods to eco-innovation. An evaluation of the product idea tree diagram. Design Stud 22:519–542

    Article  Google Scholar 

  • Kimura F, Suzuki H (1996) Product life cycle modelling for inverse manufacturing. In: Krause F-L, Jansen H (eds) Life cycle modelling for innovative products and processes. Chapman& Hall, London, pp 80–89

    Google Scholar 

  • Kobayashi H (2000) A method of life cycle planning for product eco-improvement. Int J Environ Conscious Des Manuf 8(4):27–37

    Google Scholar 

  • Kobayashi H (2001) Life cycle planning for strategic evolution of eco-products. Proceedings of the 13th International Conferences on Engineering Design, IMechE, pp 757–763

  • Kobayashi H, Haruki K (2003) A product life cycle planning method for environmentally conscious design. J Jpn Soc Precis Eng 69(2):193–199 (in Japanese)

    Google Scholar 

  • Kobayashi H, Hongu A, Haruki K, Doi S (1999) A framework of eco-design. Proceedings of the First International Symposium on Environmentally Conscious Design and Inverse Manufacturing, IEEE, pp 680–684

  • Kobayashi Y, Haruki K, Oguchi M, Kagami H, Suzuki H (2002) A new LCI database developed for LCA support tool “Easy-LCA for Web‘’. Proceedings of the 5th International Conferences on EcoBalance, pp 345–348

  • Lee B, Ishii K (1997) Demanufacturing complexity metrics in design for recyclability. Proceedings of the 1997 IEEE International Symposium on Electronics and the Environment, IEEE, pp 19–24

  • Leon-Rovira N, Aguayo H (1998) A new model of the conceptual design process using QFD/FA/TRIZ. Proceedings of the Tenth Annual Quality Function Deployment Symposium, pp 437–443

  • Lindahl M (1999) E-FMEA—a new promising tool for efficient design for environment. Proceedings of the 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, IEEE, pp 734–739

  • Martin M, Ishii K (2000) Design for variety: a methodology for developing product platform architectures. Proceedings of the 2000 ASME Design Engineering Technical Conferences, ASME, DTEC2000/DFM-14021

  • Masui K, Sakao T, Aizawa S, Inaba A (2000) Design for environment in early stages of product development using quality function deployment. Proceedings of the Electronics Goes Green 2000+, VDE Verlag, pp 197–202

  • Murayama T, Hatakeyama S, Narihiko N, Oba F (2001) Life cycle profitability analysis and LCA by simulating material and money flows. Proceedings of the 2001 IEEE International Symposium on Electronics and the Environment, IEEE, pp 139–144

  • Nakano R, Noguchi K, Kyoya Y (2001) The design support tool to set up the target specifications based on the customer requirements. Proceedings of the 11th Design Engineering and System Division Conference, JSME, pp 163–166 (in Japanese)

  • Oberender C, Weger O, Birkhofer H, Sauer J (2001) Ecological design for the usage phase: an interdisciplinary approach to design for environment. Proceedings of the Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing, IEEE, pp 71–76

  • Otto K, Wood K (1998) Product evolution: a reverse engineering and redesign methodology. Res Eng Des 10(4):226–243

    Article  Google Scholar 

  • Pahl G, Beitz W (1988) Engineering design. The Design Council, London, pp 118–139

    Google Scholar 

  • Rombouts J (1998) LEADS-II. A knowledge-based system for ranking DfE-options. Proceedings of the 1998 IEEE International Symposium on Electronics and the Environment, IEEE, pp 287–291

  • Rose C, Stevels A, Ishii K (2000) A new approach to end-of-life advisor (ELDA). Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment, IEEE, pp 99–104

  • Satty T (1980) The analytic hierarchy process. McGraw-Hill, New York

    Google Scholar 

  • Umeda Y, Life Cycle Design Committee of Inverse Manufacturing Forum (2001) Toward a life cycle design guideline for inverse manufacturing. Proceedings of the Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing, IEEE, pp 143–148

  • Umeda Y, Tomiyama T (2000) Life cycle design for inverse manufacturing. Proceedings of 2000 Japan–USA Symposium on Flexible Automation, ASME, No. I464CD

  • Umeda Y, Nonomura A, Tomiyama T (2000) Study on life-cycle design for the post mass production paradigm. Artif Intell Eng Des Anal Manuf 14(2):149–161

    Google Scholar 

  • Wenzel H, Hauschild M, Alting L (1997) Environmental assessment of products, vol 1. Chapman& Hall, London

  • Williams R, Deshmukh A, Wang B (1996) Using analytical hierarchy process to select environmentally friendly produce shipping containers. Int J Environ Conscious Des Manuf 5(2):47–52

    Google Scholar 

  • Zhang Y, Wang H, Zhang C (1998a) Life cycle design with Green QFD-II. Proceedings of the 1998 ASME Design Engineering Technical Conferences, ASME: DTEC98/DFM-5719

  • Zhang Y, Wang B, Zhang C (1998b) Product concept evaluation using GQFD-II and AHP. Int J Environ Conscious Des Manuf 7(3):1–15

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Corporate Research& Development Center, Toshiba Corp., 1 Komukai-Toshiba-cho, Saiwai-ku, Kawasaki, 212-8582, Japan

    Hideki Kobayashi

Authors
  1. Hideki Kobayashi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Hideki Kobayashi.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Kobayashi, H. Strategic evolution of eco-products: a product life cycle planning methodology. Res Eng Design 16, 1–16 (2005). https://doi.org/10.1007/s00163-005-0001-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00163-005-0001-3

Keywords

Search

Navigation