Abstract
This paper shows that the quality of resistance spot welds can be evaluated using scanning acoustic microscopy (SAM). Two-layered coated spot-welded samples are investigated utilising a wide-field short-pulse scanning acoustic microscope with operation frequencies of 25, 50 and 100 MHz. Geometrical parameters, e.g. nugget area, maximum axis of nugget, and minimum axis of nugget, are acquired from C-scan images of weld nuggets using mathematical morphology techniques. These parameters serve as inputs for an artificial neural network (ANN) model to evaluate the quality of spot welds. The output of the model during the training process comprises the results of nugget peeling tests and expert opinions. The ANN can provide suggestions on weld quality with a higher than 95% correctness. A JAVA computer program is developed for image processing, ANN training, and ANN testing. With this model, the computer program can render the quality of spot welds that are close to those achieved using off-line destructive method.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Bhattacharya S, Andrews DR, Green LW (1975) In-process quality control of spot weld. Metal Constr, pp 227–229
Dickinson DW, Franklin JE, Stanya A (1980) Characterization of spot welding behavior by dynamic electrical parameter monitoring. Welding J 59(6):170–176
Taylor JL (1987) A new approach to the displacement monitor in resistance spot welding of mild steel sheet. Metal Constr, pp 72–75
Chang HS, Cho YJ, Choi SG, Cho HS (1989) A proportional integral controller for resistance spot weld using nugget expansion. Trans AMSE 111:332–336
Tsai CL, Jammal OA, Papritan JC, Dickinson DW (1992) Modelling of resistance spot weld nugget growth. Welding J 71:47s–54s
Howe P (1994) Spot weld spacing effect on weld button size. Sheet Metal Welding Conference, paper C3
Pal K, Cronin DL (1995) Static and dynamic characteristics of spot welded sheet metal beams. Trans ASME 117:316–322
Maev RG, Watt DF, Pan R, Levin VM, Maslov KI (1996) Development of high resolution ultrasonic inspection methods for welding microdefectoscopy. Acoustical Imaging, vol 22. Plenum, pp 779–783
Yuasa H, Masazumi K (1996) Inspection device for spot welded nugget. Acoustical Imaging, vol 22. Plenum, pp 771–778
Huang H, Wang H (1992) Tandem neural networks for welding process control. J Syst Eng 2:295–303
Takuma M, Shinke N, Motono H (1996) Evaluation of function of spot-welded joint using ultrasonic inspection (nondestructive evaluation on tension shearing strength with neural network). JSME Int J series A 39(4):626–632
Serra J (1982) Image analysis and mathematical morphology. Academic, London
Myler HR, Weeks AR (1993) The pocket handbook of image processing algorithms in C. Prentice Hall, NJ
Harvey RL (1994) Neural network principles. Prentice Hall, NJ
Maev RG, Sokoloski JH, Lee HT, Maeva EY, Denissov AA (2001) Bulk and subsurface analysis of the 319 aluminum casting using acoustic microscopy methods. Mater Char 46(4):263–269
Connor LP (ed) (1991) Welding handbook. American Welding Society, Miami
Acknowledgements
The authors are grateful to the DaimlerChrysler Canada Corporation for providing financial support and experimental samples for this research.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, HT., Wang, M., Maev, R. et al. A study on using scanning acoustic microscopy and neural network techniques to evaluate the quality of resistance spot welding. Int J Adv Manuf Technol 22, 727–732 (2003). https://doi.org/10.1007/s00170-003-1599-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-003-1599-9