Abstract
In this study, commercially pure titanium sheets (American Society for Testing and Materials grade 2) were welded by resistance spot welding at various welding parameters. The welded joints were subjected to tensile-shearing tests in order to determine the strength values. In addition, the hardness and microstructural examinations were carried out in order to examine the influence of welding parameters on the welded joints. The experimental results showed that increasing electrode force, welding current and welding time increased the tensile-shearing strength of the welded specimens. Hardness measurement results indicated that welding nugget had the highest hardness and this was followed by the heat-affected zone and the base metal. Microstructural examinations showed the growth of the weld nugget grains with increasing heat input. Besides, due to plastic deformation during the welding process, twins were formed and at the same time twins increased with increasing electrode force, welding current and welding time.
Similar content being viewed by others
References
Atasoy E, Kahraman N (2006) Diffusion bonding of commercially pure titanium to low carbon steel using a silver interlayer. Mater Charact 59(10):1481–1490
Kahraman N (2007) The influence of welding parameters on the joint strength of resistance spot-welded titanium sheets. Mater Design 28:420–427
Yuan XJ, Sheng GM, Qin B, Huang WZ, Zhou B (2008) Impulse pressuring diffusion bonding of titanium alloy to stainless steel. Mater Charact 59:930–936
Chunxiang C, BaoMin H, Lichen Z, Shuangjin L (2011) Titanium alloy production technology, market prospects and industry development. Mater Design 32:1684–1691
Zeng Z, Zhang Y, Jonsson S (2009) Deformation behaviour of commercially pure titanium during simple hot compression. Mater Design 30:3105–3111
Ghosh M, Chatterjee S (2002) Characterization of transition joints of commercially pure titanium to 304 stainless steel. Mater Charact 48:393–399
Lathabai S, Jarvis BL, Barton KJ (2001) Comparison of keyhole and conventional gas tungsten arc welds in commercially pure titanium. Mat Sci Eng A 299:81–93
Baeslack WA, Davis JR, Cross CE. Selection and weldability of conventional titanium alloys. Welding, Brazing and Soldering. ASM Handbook. ASM International. Metals Park. USA. 1993, p. 507–23.
Baeslack WA, Gerken JM, Cross C, Hanson J, Liu PS, Monses JC, Schley SL (1998) Titanium and titanium alloys. Welding hand book. American Welding Society, Miami, FL, USA, pp 488–540
Miguel A (2005) Custom-made laser-welded titanium implant prosthetic abutment. J Prosthet Dent 94:401–403
Saresh N, Gopalakrishna PM, Mathew J (2007) Investigations into the effects of electron beam welding on thick Ti–6Al–4 V titanium alloy. J Mater Process Tech 192–93:83–88
American Welding Society (1988) Welding processes. Welding hand book vol 2. American Welding Society, Miami, FL, USA, pp 695–697
American Welding Society (1982) Metals and their weldability. Welding hand book vol 4. American Welding Society, Miami FL, USA, pp 19–20
Lee WB, Lee CY, Chang WS, Yeon YM, Jung SB (2005) Microstructural investigation of friction stir welded pure titanium. Mater Lett 59:3315–3318
Aslanlar S, Ogur A, Ozsarac U, Ilhan E (2008) Welding time effect on mechanical properties of automotive sheets in electrical resistance spot welding. Mater Design 29:1427–1431
Huh H, Kang WJ (1997) Electrothermal analysis of electric resistance spot welding processes by a 3-D finite element method. J Mater Process Tech 63:672–677
Ozyurek D (2008) An effect of weld current and weld atmosphere on the resistance spot weldability of 304 L austenitic stainless steel. Mater Design 29:597–603
Vural M, Akkuş A (2004) On the resistance spot weldability of galvanized interstitial free steel sheets with austenitic staninless steel sheets. J Mater Process Tech 1–6:153–154
Jou M (2003) Real time monitoring weld quality of resistance spot welding for the fabrication of sheet metal assemblies. J Mater Process Tech 132:102–113
Yang YS, Lee SH (2005) A study on the joining strength of laser spot welding for automotive applications. J Mater Process Tech 94:151–156
Wang SH, Wei MD, Tsay LW (2003) Tensile properties of LBW welds in Ti-6Al-4 V alloy at evaluated temperatures below 450°C. Mater Lett 57:1815–1823
Li C, Muneharua K, Takao S, Kouji H (2009) Fiber Laser-GMA hybrid welding of commercially pure titanium. Mater Design 30(1):109–114
Sun Z, Annergren I, Pan D, Mai TA (2003) Effect of laser surface remelting on the corrosion behavior of commercially pure titanium sheet. Mat Sci Eng A 345:293–300
Gourd LM (1995) Principles of welding technology, 3rd edn. British Library Cataloguing in Publication Data, London, UK, pp 2–4
Marashi P, Pouranvari M, Amirabdollahian S, Abedi A, Goodarzi M (2008) Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized and austenitic stainless steels. Mat Sci Eng A 480:175–180
Fukuomoto S, Fujiwara K, Toji S, Yamamoto A (2008) Small-scale resistance spot welding of austenitic stainless steels. Mat Sci Eng A 492(1–2):243–249
Sun DQ, Lang B, Sun DX, Li JB (2007) Microstructures and mechanical properties of resistance spot welded magnesium alloy joint. Mat Sci Eng A 460–461:494–498
Martin O, Tiedra PD, Lopez M, San-Juan M, Garcia C, Martin F, Blanco Y (2008) Quality prediction of resistance spot welding joints of 304 austenitic stainless steel. Mater Design 30(1):68–77
Chuko WL, Gould JE (2002) Development of appropriate resistance spot welding practice for transformation-hardened steels. Weld J 1–5.
Kahraman N. Joint of titanium plates to different metals by explosive welding method and investigation of their interface properties. Ph.D. Thesis; Gazi University, Turkey. 2003.
Smith WF (1993) Structure and properties of engineering alloys, Secondth edn. McGraw-Hill, New York, pp 433–439
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kaya, Y., Kahraman, N. The effects of electrode force, welding current and welding time on the resistance spot weldability of pure titanium. Int J Adv Manuf Technol 60, 127–134 (2012). https://doi.org/10.1007/s00170-011-3604-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-011-3604-z