Skip to main content
SpringerLink
Log in

Additive manufacturing-enabled design theory and methodology: a critical review

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

As additive manufacturing (AM) process evolves from rapid prototyping to the end-of-use product manufacturing process, manufacturing constraints have largely been alleviated and design freedom has been significantly broadened, including shape complexity, material complexity, hierarchical complexity, and functional complexity. Inevitably, conventional Design Theory and Methodology (DTM) especially life-cycle objectives oriented ones are challenged. In this paper, firstly, the impact of AM on conventional DTM is analyzed in terms of design for manufacturing (DFM), design for assembly (DFA), and design for performance (DFP). Abundance of evidences indicate that conventional DTM is not qualified to embrace these new opportunities and consequently underline the need for a set of design principles for AM to achieve a better design. Secondly, design methods related with AM are reviewed and classified into three main groups, including design guidelines, modified DTM for AM, and design for additive manufacturing (DFAM). The principles and representative design methods in each category are studied comprehensively with respect to benefits and drawbacks. A new design method partially overcoming these drawbacks by integrating function integration and structure optimization to realize less part count and better performance is discussed. Design tools as a necessary part for supporting design are also studied. In the meantime, the review also identified the possible areas for future research.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Reuleaux F (1861) Konstrukteur. Vieweg und Sohn, Braunschweig

    Google Scholar 

  2. Reuleaux F (1875) Theorische kinematic. Vieweg und Sohn, Braunschweig

    Google Scholar 

  3. Tomiyama T, Gu P, Jin Y, Lutters D, Kind C, Kimura F (2009) Design methodologies: industrial and educational applications. CIRP Anna Manuf Technol 58(2):543–565

    Article  Google Scholar 

  4. Watts D, Hague R (2006) Exploiting the design freedom of RM. In: Proceeding of the solid freeform fabrication Symp., Austin, TX, August 14-16, Cambridge University Press, pp 656-667

  5. Hague R, Mansour S, Saleh N (2003) Design opportunities with rapid manufacturing. Assem Autom 23(4):346–356

    Article  Google Scholar 

  6. Standard A F2792. (2012) Standard terminology for additive manufacturing technologies. ASTM F2792-10e1

  7. Hopkinson N, Dickens P (2006) Emerging rapid manufacturing processes. In: Rapid manufacturing—an industrial revolution for the digital age. John Wiley, Chichester. pp 55-80

  8. Prakash WN, Sridhar VG, Annamalai K (2014) New product development by DFMA and rapid prototyping. ARPN J Eng Appl Sci 9(3):274–279

    Google Scholar 

  9. Hopkinson N, Gao Y, McAfee DJ (2006) Design for environment analyses applied to rapid manufacturing. Proc Inst Mech Eng D J Automob Eng 220(D10):1363–1372. doi:10.1243/09544070jauto309

    Article  Google Scholar 

  10. Campbell RI, Hague RJ, Sener B, Wormald PW (2003) The potential for the bespoke industrial designer. Des J 6(3):24–34

    Google Scholar 

  11. Masters M, Mathy M (2002) Direct manufacturing of custom-made hearing instruments, an implementation of digital mechanical processing. Paper presented at the SME Rapid Prototyping Conference and Exhibition, Cincinnati, OH, USA, April

  12. Bourell DL, Leu MC, Rosen DW (2009) Roadmap for additive manufacturing: identifying the future of freeform processing. The University of Texas, Austin

    Google Scholar 

  13. Loughborough U Rapid Manufacturing Research Group. http://www.lboro.ac.uk/departments/mm/research/rapid-manufacturing/index.html. Accessed 28 September 2014

  14. Gibson I, Rosen DW, Stucker B (2010) Additive Manufacturing technologies: rapid prototyping to direct digital manufacturing. Springer, US

    Book  Google Scholar 

  15. Thomas D (2010) The development of design rules for selective laser melting. Dissertation, University of Wales, UK

  16. Regenfuss P, Ebert R, Exner H (2007) Laser micro sintering—a versatile instrument for the generation of microparts. Laser Tech J 4(1):26–31

    Article  Google Scholar 

  17. Wohlers TT (2010) Wohlers Report 2010: additive manufacturing state of the inudstry: annual worldwide progress report. Wohlers Associates

  18. Tomiyama T A classification of design theories and methodologies. In: ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2006. American Society of Mechanical Engineers, pp 43-51

  19. Reich Y (1995) A critical review of general design theory. Res Eng Des 7(1):1–18

    Article  Google Scholar 

  20. Suh NP (1990) The principles of design. Oxford University Press, New York

    Google Scholar 

  21. Pahl G, Beitz W, Feldhusen J, Grote K-H (2007) Engineering design: a systematic approach, vol 157. Springer, US

    Book  Google Scholar 

  22. Gu P, Hashemian M, Nee A (2004) Adaptable design. CIRP Ann Manuf Technol 53(2):539–557

    Article  Google Scholar 

  23. Weber C CPM/PDD–an extended theoretical approach to modelling products and product development processes. In: Proceedings of the 2nd German-Israeli Symposium on Advances in Methods and Systems for Development of Products and Processes, 2005. pp 159-179

  24. Albers A, Matthiesen S, Ohmer M (2003) An innovative new basic model in design methodology for analysis and synthesis of technical systems. In: DS 31: Proceedings of ICED 03, the 14th International Conference on Engineering Design, Stockholm

  25. Bralia J (1986) Handbook of product design for manufacturing: a practical guide to low-cost production. McGraw-Hill Book Company, 1986:1120

  26. Boothroyd G, Dewhurst P, Knight WA, Press C (2002) Product design for manufacture and assembly. M. Dekker, New York

    Google Scholar 

  27. Hague R, Mansour S, Saleh N (2004) Material and design considerations for rapid manufacturing. Int J Prod Res 42(22):4691–4708

    Article  Google Scholar 

  28. Hague R, Campbell I, Dickens P (2003) Implications on design of rapid manufacturing. Proceedings of the Institution of Mechanical Engineers, Part C. J Mech Eng Sci 217(C1):25–30

    Article  Google Scholar 

  29. Hague R (2006) Unlocking the design potential of rapid manufacturing. In: Hopkinson N, Hague R, Dickens P (eds) Rapid manufacturing: an industrial revolution for the digital age. Wiley, USA

    Google Scholar 

  30. Perez KB, Williams CB Combining additive manufacturing and direct write for integrated electronics—a review. In: 24th International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, SFF 2013, August 12, 2013 - August 14, 2013, Austin, TX, United states, 2013. 24th International SFF Symposium—An Additive Manufacturing Conference, SFF 2013. University of Texas at Austin (freeform), pp 962–979

  31. Lopes AJ, MacDonald E, Wicker RB (2012) Integrating stereolithography and direct print technologies for 3D structural electronics fabrication. Rapid Prototyp J 18(2):129–143

    Article  Google Scholar 

  32. Palmer J, Jokiel B, Nordquist C, Kast B, Atwood C, Grant E, Livingston F, Medina F, Wicker R (2006) Mesoscale RF relay enabled by integrated rapid manufacturing. Rapid Prototyp J 12(3):148–155

    Article  Google Scholar 

  33. Kerbrat O, Mognol P, Hascoët JY (2011) A new DFM approach to combine machining and additive manufacturing. Comput Ind 62(7):684–692

    Article  Google Scholar 

  34. Rosen DW (2007) Computer-aided design for additive manufacturing of cellular structures. Comput-Aided Des Applic 4(5):585–594

    Article  Google Scholar 

  35. Choi J-W, Yamashita M, Sakakibara J, Kaji Y, Oshika T, Wicker RB (2010) Combined micro and macro additive manufacturing of a swirling flow coaxial phacoemulsifier sleeve with internal micro-vanes. Biomed Microdevices 12(5):875–886

    Article  Google Scholar 

  36. Mudge RP, Wald NR (2007) Laser engineered net shaping advances additive manufacturing and repair. Weld J 86(1):44

    Google Scholar 

  37. Andreasen MM, Kähler S, Lund T (1983) Design for assembly. Ifs Publications, London

    Google Scholar 

  38. Mavroidis C, DeLaurentis KJ, Won J, Alam M (2001) Fabrication of non-assembly mechanisms and robotic systems using rapid prototyping. J Mech Des 123(4):516–524

    Article  Google Scholar 

  39. Chen YH, Chen ZZ (2011) Joint analysis in rapid fabrication of non-assembly mechanisms. Rapid Prototyp J 17(6):408–417. doi:10.1108/13552541111184134

    Article  Google Scholar 

  40. Agarwala M, Bourell D, Beaman J, Marcus H, Barlow J (1995) Direct selective laser sintering of metals. Rapid Prototyp J 1(1):26–36

    Article  Google Scholar 

  41. Siu YK, Tan ST (2002) Modeling the material grading and structures of heterogeneous objects for layered manufacturing. Comp-Aided Des 34(10):705–716

    Article  Google Scholar 

  42. Tolochko N, Mozzharov S, Laoui T, Froyen L (2003) Selective laser sintering of single- and two-component metal powders. Rapid Prototyp J 9(2):68–78

    Article  Google Scholar 

  43. Chiu W, Yu K (2008) Direct digital manufacturing of three-dimensional functionally graded material objects. Comp-Aided Des 40(12):1080–1093

    Article  Google Scholar 

  44. Oxman N, Keating S, Tsai E Functionally graded rapid prototyping. In: 5th International conference on advanced research in virtual and physical prototyping, VR@P 2011, September 28, 2011 - October 1, 2011, Leiria, Portugal, 2012. Innovative developments in virtual and physical prototyping - Proceedings of the 5th International Conference on Advanced Research and Rapid Prototyping. Taylor and Francis Inc., pp 483-489

  45. Oxman N (2007) Get real towards performance-driven computational geometry. Int J Archit Comput 5(4):663–684

    Article  Google Scholar 

  46. Oxman N (2010) Material-based design computation. Massachusetts Institute of Technology

  47. Oxman N (2010) Structuring materiality: design fabrication of heterogeneous materials. Archit Des 80(4):78–85

    Google Scholar 

  48. Oxman N (2011) Variable property rapid prototyping: inspired by nature, where form is characterized by heterogeneous compositions, the paper presents a novel approach to layered manufacturing entitled variable property rapid prototyping. Virtual Phys Prototyp 6(1):3–31

    Article  Google Scholar 

  49. Franky (2011) 3D printing in the world’s greatest museum of art and design i.materialise. http://i.materialise.com/blog/entry/3d-printing-in-the-worlds-greatest-museum-of-art-and-design. Accessed October 29 2014

  50. Ponche R, Hascoet JY, Kerbrat O, Mognol P (2012) A new global approach to design for additive manufacturing. Virtual Phys Prototyp 7(2):93–105

    Article  Google Scholar 

  51. DMRC (2012) Direct Manufacturing Research Center Annual Report. https://mb.uni-paderborn.de/fileadmin/dmrc/Research/Publications/dmrc_report_2012.pdf. Accessed 28 September 2014

  52. Ponche R, Kerbrat O, Mognol P, Hascoet JY (2014) A novel methodology of design for Additive manufacturing applied to additive laser manufacturing process. Robot Comput Integr Manuf 30(4):389–398. doi:10.1016/j.rcim.2013.12.001

    Article  Google Scholar 

  53. Becker R, Grzesiak A, Henning A (2005) Rethink assembly design. Assem Autom 25(4):262–266

    Article  Google Scholar 

  54. Atzeni E, Iuliano L, Minetola P, Salmi A (2010) Redesign and cost estimation of rapid manufactured plastic parts. Rapid Prototyp J 16(5):308–317

    Article  Google Scholar 

  55. Adam GAO, Zimmer D (2014) Design for additive manufacturing—element transitions and aggregated structures. CIRP Journal of Manufacturing Science and Technology 7 (1):20-28. doi:http://dx.doi.org/10.1016/j.cirpj.2013.10.001

  56. Popsecu D (2007) Design for rapid prototyping: implementation of design rules regarding the form and dimensional accuracy of RP prototypes. Annals of Daaam for 2007 & Proceedings of the 18th International Daaam symposium: intelligent manufacturing & automation: focus on creativity, responsibility, and ethics of engineers

  57. Kruf W, van de Vorst B, Maalderink H, Kamperman N Design for rapid manufacturing functional SLS parts. In: Intelligent Production Machines and Systems-2nd I* PROMS Virtual International Conference 3-14 July 2011. Elsevier, p 389

  58. Kim GD, Oh YT (2008) A benchmark study on rapid prototyping processes and machines: quantitative comparisons of mechanical properties, accuracy, roughness, speed, and material cost. 222 (B2):201-215. doi:10.1243/09544054JEM724

  59. Mahesh M, Wong Y, Fuh J, Loh H (2004) Benchmarking for comparative evaluation of RP systems and processes. Rapid Prototyp J 10(2):123–135

    Article  Google Scholar 

  60. Shellabear M (1999) Benchmark study of accuracy and surface quality in RP models. Brite/EuRam Report BE-2051, Task 4 (2)

  61. ASTM (2012) ASTM WK38342 new guide for design for additive manufacturing. ASTM International, West Conshohocken, doi: draft under development

    Google Scholar 

  62. Segonds F (2011) Contribution to the integration of a collaborative design environment in the early stages of design. PhD, Arts et Metiers ParisTech

  63. Boyard N, Rivette M, Christmann O, Richir S (2014) A design methodology for parts using additive manufacturing. High value manufacturing: advanced research in virtual and rapid prototyping. 399-404

  64. Rodrigue H, Rivette M, Calatoru V, Richir S Une méthodologie de conception pour la fabrication additive. In: 2011. Congrès International de Génie Industriel

  65. Andreassen E, Lazarov BS, Sigmund O (2014) Design of manufacturable 3D extremal elastic microstructure. Mech Mater 69(1):1–10

    Article  Google Scholar 

  66. Moodie ALR, Angle JP, Tackett EC, Rupert TJ, Mecartney ML, Valdevit L (2013) Ceramic and hybrid micro-architected materials for high temperature applications. In: Long Beach, CA, . SAMPE 2013 Conference and exhibition: education and green sky - materials technology for a better world. pp 34-43

  67. Lin CY, Wirtz T, LaMarca F, Hollister SJ (2007) Structural and mechanical evaluations of a topology optimized titanium interbody fusion cage fabricated by selective laser melting process. J Biomed Mater Res A 83(2):272–279

    Article  Google Scholar 

  68. Rezaie R, Badrossamay M, Ghaie A, Moosavi H (2013) Topology optimization for fused deposition modeling process. Procedia CIRP 6:521–526

    Article  Google Scholar 

  69. Joo JJ, Reich GW, Westfall JT (2009) Flexible skin development for morphing aircraft applications via topology optimization. J Intell Mat Syst Struct 20(16):1969–1985

    Article  Google Scholar 

  70. Bickel B, Bächer M, Otaduy MA, Lee HR, Pfister H, Gross M, Matusik W (2010) Design and fabrication of materials with desired deformation behavior. In: ACM Transactions on Graphics (TOG), . vol 4. ACM, p 63

  71. Evans A, Hutchinson J, Fleck N, Ashby M, Wadley H (2001) The topological design of multifunctional cellular metals. Prog Mater Sci 46(3):309–327

    Article  Google Scholar 

  72. Ma Z-D, Wang H, Kikuchi N, Pierre C, Raju B (2006) Experimental validation and prototyping of optimum designs obtained from topology optimization. Struct Multidiscip Optim 31(5):333–343

    Article  Google Scholar 

  73. Zhou M, Xi J, Yan J (2004) Modeling and processing of functionally graded materials for rapid prototyping. J Mater Process Technol 146(3):396–402

    Article  Google Scholar 

  74. Blouin VY, Oschwald M, Hu Y, Fadel GM (2005) Design of functionally graded structures for enhanced thermal behavior. In: ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Am Soc Mech Eng pp 835-843

  75. Rännar L-E, Glad A, Gustafson C-G (2007) Efficient cooling with tool inserts manufactured by electron beam melting. Rapid Prototyp J 13(3):128–135

    Article  Google Scholar 

  76. Chen Y, Zhou S, Li Q (2011) Microstructure design of biodegradable scaffold and its effect on tissue regeneration. Biomaterials 32(22):5003–5014

    Article  Google Scholar 

  77. Castilho M, Dias M, Gbureck U, Groll J, Fernandes P, Pires I, Gouveia B, Rodrigues J, Vorndran E (2013) Fabrication of computationally designed scaffolds by low temperature 3D printing. Biofabrication 5(3):035012

    Article  Google Scholar 

  78. Faur C, Crainic N, Sticlaru C, Oancea C (2013) Rapid prototyping technique in the preoperative planning for total hip arthroplasty with custom femoral components. Wien Klin Wochenschr 125(5–6):144–149

    Article  Google Scholar 

  79. Bendsøe MP, Ben-Tal A, Zowe J (1994) Optimization methods for truss geometry and topology design. Struct Optim 7(3):141–159

    Article  Google Scholar 

  80. Dorn WS, Gomory RE, Greenberg HJ (1964) Automatic design of optimal structures. J Mecanique 3(1):25–52

    Google Scholar 

  81. Bendsøe MP, Kikuchi N (1988) Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 71(2):197–224

    Article  MathSciNet  MATH  Google Scholar 

  82. Rozvany G, Zhou M, Birker T (1992) Generalized shape optimization without homogenization. Struct Optim 4(3–4):250–252

    Article  Google Scholar 

  83. Allaire G, Jouve F, Toader A-M (2002) A level-set method for shape optimization. C R Math 334(12):1125–1130

    Article  MathSciNet  MATH  Google Scholar 

  84. Wang MY, Wang X, Guo D (2003) A level set method for structural topology optimization. Comput Methods Appl Mech Eng 192(1–2):227–246. doi:10.1016/S0045-7825(02)00559-5

    Article  MathSciNet  MATH  Google Scholar 

  85. Xie Y, Steven GP (1993) A simple evolutionary procedure for structural optimization. Comput Struct 49(5):885–896

    Article  Google Scholar 

  86. Young V, Querin O, Steven G, Xie Y (1999) 3D and multiple load case bi-directional evolutionary structural optimization (BESO). Struct Optim 18(2–3):183–192

    Article  Google Scholar 

  87. Wang SY, Tai K (2005) Structural topology design optimization using genetic algorithms with a bit-array representation. Comput Methods Appl Mech Eng 194(36–38):3749–3770. doi:10.1016/j.cma.2004.09.003

    Article  MATH  Google Scholar 

  88. Chen Z, Gao L, Qiu H, Shao X (2009) Combining genetic algorithms with optimality criteria method for topology optimization. In: Bio-Inspired Computing. BIC-TA'09. Fourth International Conference on, 2009. IEEE, pp 1-6

  89. Wang H, Rosen DW Parametric modeling method for truss structures. In: ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2002. Am Soc Mech Eng, pp 759-767

  90. Costa L, Vilar R, Reti T, Deus A (2005) Rapid tooling by laser powder deposition: process simulation using finite element analysis. Acta Mater 53(14):3987–3999

    Article  Google Scholar 

  91. Alimardani M, Toyserkani E, Huissoon JP (2007) A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process. Opt Lasers Eng 45(12):1115–1130

    Article  Google Scholar 

  92. Ancău M, Caizar C (2010) The computation of Pareto-optimal set in multicriterial optimization of rapid prototyping processes. Comput Ind Eng 58(4):696–708

    Article  Google Scholar 

  93. Ponche R (2013) Méthodologie de conception pour la fabrication additive, application à la projection de poudres. Ecole centrale de nantes-ECN

  94. Vayre B, Vignat F, Villeneuve F (2012) Designing for additive manufacturing. Procedia CIRP 3(0):632–637. doi:10.1016/j.procir.2012.07.108

    Article  Google Scholar 

  95. Vayre B, Vignat F, Villeneuve F (2013) Identification on some design key parameters for additive manufacturing: application on electron beam melting. Forty Sixth Cirp Conference on Manufacturing Systems 2013 7:264-269. doi:10.1016/j.procir.2013.05.045

  96. Rosen DW (2007) Design for additive manufacturing: a method to explore unexplored regions of the design space. In: Eighteenth Annual Solid Freeform Fabrication Symposium. pp 402-415

  97. Y. Tang, Hascoet JV, Zhao YF (2014) Integration of topological and functional optimization in design for additive manufacturing. Paper presented at the ASME 2014 12th Biennial Conference on Engineering Systems Copenhagen, Denmark

  98. Bin Maidin S (2011) Development of a design feature database to support design for additive manufacturing (DfAM). Dissertation, Loughborough University, UK

  99. 3DSYSTEMS (2015) Geomagic Design X. http://www.rapidform.com/products/xor/overview/. Accessed Feb. 18 2015

  100. ISTI-CNR (2015) Meshlab. http://meshlab.sourceforge.net/. Accessed Feb. 18 2015

  101. Beaman JJ, Atwood C, Bergman TL, Bourell D, Hollister S, D R (2004) Assessment of European Research and Development in Additive/Subtractive Manufacturing. National Science Foundation (NSF)

  102. ISO (2013) Standard specification for additive manufacturing file format (AMF) Version 1.1. http://www.iso.org/iso/catalogue_detail.htm?csnumber=61944. Accessed Feb. 20 2015

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Faculty of Engineering, McGill University, Montreal, H3A 0C3, Canada

    Sheng Yang & Yaoyao Fiona Zhao

Authors
  1. Sheng Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yaoyao Fiona Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yaoyao Fiona Zhao.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yang, S., Zhao, Y.F. Additive manufacturing-enabled design theory and methodology: a critical review. Int J Adv Manuf Technol 80, 327–342 (2015). https://doi.org/10.1007/s00170-015-6994-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-015-6994-5

Keywords

Search

Navigation