Abstract
Every industrial process has to encounter two types of variation in product characteristic(s) that can be classified as common and special cause variations. These variations can exist in any parameters (like location, dispersion, shape, etc.) of the distribution of process characteristic. To handle the special cause variations, statistical tools are generally used to handle these special cause variations; statistical control chart is one of them. The most famous control charts are Shewhart, exponentially weighted moving average and cumulative sum charts, and their substantial modifications are available in the literature. In this article, we have proposed a new control chart named as mixed CUSUM-EWMA (called MCE) control chart for the efficient monitoring of process dispersion. The proposed MCE chart is compared with other existing control charts and some of their modifications. Average run length, extra quadratic loss, relative average run length, and performance comparison index are the measures that are used to judge the performance of charts. For practical considerations, an illustrative example with real data is also provided.
Similar content being viewed by others
References
Shewhart, W. A. (1931) Economic control of quality manufactured product. D. Van Nostrand. New York: (reprinted by the American Society for Quality Control in 1980, Milwaukee, WI)
Page ES (1954) Continuous inspection schemes. Biometrika 41(1–2):100–115
Roberts SW (1959) Control chart tests based on geometric moving averages. Technometrics 1(3):239–250
Wortham A, Ringer L (1971) Control via exponentially smoothing. Logistics Transp Rev 7(1):133–139
Tuprah K, Ncube M (1987) A comparison of dispersion quality control charts. Seq Anal 6(2):155–163
Ng, C., and Case, K. (1989) Development and evaluation of control charts using exponentially weighted moving averages. Journal of Quality Technology(21), 242–250
Crowder SV, Hamilton M (1992) An EWMA for monitoring process standard deviation. J Qual Technol 24(1):12–21
Chang TC, Gan FF (1995) A cumulative sum control chart for monitoring process variance. J Qual Technol 27(2):109–119
Acosta-Mejia CA, Pignatiello JJ, Venkateshwara RB (1999) A comparison of control charting procedures for monitoring process dispersion. IIE Trans 31(6):569–579
Castagliola P, Celano G, Fichera S (2005) A new CUSUM-S2 control chart for monitoring the process variance. J Qual Maint Eng 15(4):344–357
Castagliola P (2009) A new S2-EWMA control chart for monitoring process variance. Qual Reliab Eng Int 21(8):781–794
Abbas N, Riaz M, Does RJMM (2013) Mixed exponentially weighted moving average—cumulative sum charts for process monitoring. Qual Reliab Eng Int 29(3):345–356
Abbas N, Riaz M, Does RJMM (2013) CS-EWMA chart for monitoring process dispersion. Qual Reliab Eng Int 29(5):653–663
Zaman B, Riaz M, Abbas N, Does RJMM (2014) Mixed cumulative sum–exponentially weighted moving average control charts: an efficient way of monitoring process location. Qual Reliab Eng Int. doi:10.1002/qre.1678
Quesenberry CP (1995) On properties of Q charts variables. J Qual Technol 27:184–203
Wu Z, Jiao JX, Yang M, Liu Y, Wang ZJ (2009) An enhanced adaptive CUSUM control chart. IIE Trans 41(7):642–653
Ryu JH, Wan H, Kim S (2010) Optimal design of a CUSUM chart for a mean shift of unknown size. Journal of Qual Technol 42(3):311–326
Zhao Y, Tsun F, Wang Z (2005) Dual CUSUM control schemes for detecting a range of mean shifts. IIE Trans 37(11):1047–1057
Han D, Tsung F, Li Y (2007) A CUSUM chart with local signal amplification for detecting a range of unknown shifts. Int J Reliab Qual Saf Eng 14(2):81–97
Ou YJ, Wu Z, Tsung F (2012) A comparison study of effectiveness and robustness of control charts for monitoring process mean. Int J Prod Econ 135(1):479–490
Zhang S, Wu Z (2006) Monitoring the process mean and variance by the WLC scheme with variable sampling intervals. IIE Trans 38(4):377–387
Ou YJ, Wu Z, Goh TN (2011) A new SPRT chart for monitoring process mean and variance. Int J Prod Econ 132(2):303–314
Ahmad S, Riaz M, Abbasi SA, Lin Z (2014) On efficient median control charting. J Chin Inst Eng 37(3):358–375
Ahmad S, Riaz M, Abbasi SA, Lin Z (2012) On median control charting under double sampling scheme. Eur J Ind Eng 8(4):478–512
Ahmad S, Riaz M, Abbasi SA, Lin Z (2013) On monitoring process variability under double sampling scheme. Int J Prod Econ 142(2):388–400
Abbas N, Riaz M, Does RJMM (2014) Memory-type control charts for monitoring the process dispersion. Qual Reliab Eng Int 30(5):623–632
Page ES (1963) Controlling the standard deviations by CUSUM and warning lines. Technometrics 5:307–315
Huwang L, Huang CJ, Wang YT (2010) New EWMA control charts for monitoring process dispersion. Comput Stat Data Anal 54(10):2328–2342
Shu, L., and Jiang, W. (2008) A new EWMA chart for monitoring process dispersion. Journal of Quality Technology(40), 319–331
Page ES (1951) Cumulative sum charts. Technometrics 3(1):1–9
Montgomery DC (2009) Introduction to statistical quality control, 6th edn. Wiley, New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zaman, B., Abbas, N., Riaz, M. et al. Mixed CUSUM-EWMA chart for monitoring process dispersion. Int J Adv Manuf Technol 86, 3025–3039 (2016). https://doi.org/10.1007/s00170-016-8411-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-8411-0