Abstract
Laser arc hybrid welding became a useful method to weld thick plates. But a sound weld is not so easy to obtain because of the uncontrollability of droplet transfer state, especially in ultra-narrow gap welding process. In this study, V-like ultra-narrow gap welds were carried out using 80 % Ar + 20 % CO2 blend as shielding gas. A high-speed video system was used to observe the droplet transfer behaviors. The results showed that the transfer mode did not change with the same welding current. The transfer mode changed from the short circuiting transfer to the mixture of the short circuiting and the globular transfer and then to spray transfer as the welding current increased. The relationship between the droplet transfer process and the welded defects was studied to obtain high-quality weld joint with a stable transfer process. The optimal parameter window between welding current and groove size was found. Only when the welding current was 200 to 270 A and groove gap was 2 to 3 mm, can a good welded joint be got. Finally, 30-mm-thick plate with 5.49-mm maximum groove gap was welded well by one pass laser autogenous welding and seven passes laser arc hybrid welding process.
Similar content being viewed by others
References
Campana G, Fortunato A, Ascari A, Tani G, Tomesani L (2007) The influence of arc transfer mode in hybrid laser-MIG welding. J Mater Process Technol 191:111–113
Liu S, Liu F, Zhang H (2012) Analysis of droplet transfer mode and forming process of weld bead in CO2 laser-MIG hybrid welding process. Opt Laser Technol 44:1019–1025
Liu S, Shi Y, Zhang H (2010) Effects of shielding gas parameters on droplet transfer and weld bead profile prepare by CO2 laser-MAG hybrid welding. Opt Laser Eng 20:143–155
Wong Y, Ling S (2014) An investigation of dynamical metal transfer in GMAW effects of argon shielding gas. J Mater Process Technol 214:106–111
Shi Y, He W, Zhu M, Zhou H (2014) Detection and analysis of influence of shield gas on melt drop metal transfer behavior in consumable double-wire bypass coupled GMAW arc. J Lanzhou Univ Technol 40:19–22
Zhang W, Hua X, Liao W (2014) The effect of the welding direction on the plasma and metal transfer behavior of CO2 laser + GMAW-P hybrid welding processes. Opt Lasers Eng 58:102–108
Liu S, Liu F, Xu C, Zhang H (2013) Experimental investigation on arc characteristic and droplet transfer in CO2 laser–metal arc gas (MAG) hybrid welding. Int J Heat Mass Transf 62:604–611
Guen EL, Fabbro R, Carin M (2011) Analysis of hybrid Nd: Yag laser-MAG arc welding processes. Opt Laser Technol 43:1155–1166
Zhang X, Li H, Yang L, Gao Y (2014) The influence of laser power on the arc shape and droplet transfer in laser-twin-wire pulsed MIG hybrid welding. Weld J 35:23–26
Lei Z, Li Q, Chen Y (2007) Study on droplet transfer mechanical behavior in laser-MIG hybrid welding process. Chin J Laser 34:259–263
Lowke J (2011) Globular and spray transfer in MIG welding. Weld World 55:19–23
Kah P, Suoranta R, Martikainen J (2013) Advanced gas metal arc welding processes. Int J Adv Manuf Technol 67:655–674
Zhang W, Hua X, Liao W (2014) The influence of welding speed on the plasma behavior and droplet transfer in CO2 laser-GMAW-P hybrid welding. Int J Adv Manuf Technol 72:935–942
Chen Y, Feng J, Li L, Li Y, Chang S (2013) Effects of welding positions of droplet transfer in CO2 laser-MAG hybrid welding. Int J Adv Manuf Technol 68:1351–1359
Jonsson P, Eager T, Szekely J (1995) Heat and metal transfer in gas metal arc welding using argon and helium. Metall Mater Trans B Process Metall Mater Process Sci 26:383–395
Luo J, Luo Q, Wang X, Wang X (2010) EMS-CO2 welding: a new approach to improve droplet transfer characteristics and welding formation. Mater Manuf Process 25:1233–1241
Lee SH, Kim US, Lee BY (2005) The effect of external electromagnetic force in gas metal arc welding on the transfer mode. Key Eng Mater 297–300:2825–2830
Kodama S, Ichiyama Y, Ikuno Y, Baba N (2004) A mathematical model of short-circuiting transfer in the high-speed oscillating MAG process development of automatic MAG welding machine with arc sensor and its application to field welding of gas pipelines. Weld World 48:27–34
Xu W, Fan C, Lin S, Yang C (2014) Research on droplet transfer in oscillating arc narrow gap GMA welding. China Weld 23:12–16
Wu Y, Kovacevic R (2002) Mechanically assisted droplet transfer process in gas metal arc welding. Proc Inst Mech Eng B J Eng Manuf 21:6555–6564
Guo N, Han Y, Jia C, Du Y (2011) Effects of wire rotating frequency on metal transfer process in rotating arc narrow gap horizontal GMAW. Adv Mater Res 183–193:3395–3399
Li G, Chen Z, Gao M, Zeng X (2014) Role of arc mode in laser-metal active gas arc hybrid welding of mild steel. Mater Des 61:239–250
Subramaniam S, White D, Jones J, Lyons D (1998) Droplet transfer in pulsed gas metal arc welding of aluminum. Weld J 77:458–464
Wu K, Huang S, Meng Y, Li Y (2004) Control strategy of waveform with median phase in droplet transfer for pulsed MIG welding. China Weld 25:51–54
Knyaz'kov A, Krampit NY, Krampit A (2008) Controlling the droplet transfer process in CO2 welding with a long arc. Weld Int 22:534–536
Reisgen U, Purrio M, Buchholz G, Willms K (2013) Possibilities of a control of the droplet detachment in pulsed gas metal arc welding. Weld World 57:701–706
Ghosh P, Dron L, Devakumaran K, Hofmann F (2009) Pulsed current gas metal arc welding under different shielding and pulse parameters; part 2: behaviour of metal transfer. ISIJ Int 49:261–269
Kumar R, Dilthry U, Dwivedi D, Sharma S, Ghosh P (2009) Welding of thin sheet of Al alloy (6082) by using various wire DC P-GMAW. Int J Adv Manuf Technol 42:102–117
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, R., Yue, J., Sun, R. et al. A study of droplet transfer behavior in ultra-narrow gap laser arc hybrid welding. Int J Adv Manuf Technol 87, 2997–3008 (2016). https://doi.org/10.1007/s00170-016-8699-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-8699-9