Abstract
This research presents an innovative wire-arc additive manufacturing process for fabricating Fe3Al-based iron aluminide buildup walls with 30 at.% Al content. The alloy is produced in situ through controlled addition of the elemental iron and aluminum components into the welding process. The influences of major process parameters, including deposition current and interpass temperature to the material and mechanical properties of the buildup walls are investigated using optical microstructure analysis, hardness testing, tensile testing, X-ray diffraction phase characterization, and electron dispersive spectroscopy. The results have indicated that deposition current is the dominant factor to the grain size in the buildup walls, and interpass temperature is critical for preventing stress induced cracking.
Similar content being viewed by others
References
Almeida PS, Williams S (2010) Innovative process model of Ti–6Al–4V additive layer manufacturing using cold metal transfer (CMT). Proceedings of the 21st Annual International Solid Freeform Fabrication Symposium 25–36
Ding D, Pan Z, Cuiuri D, Li H (2015) A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM). Robot Comput Integr Manuf 31:101–110
Ma Y, Cuiuri D, Hoye N, Li H, Pan Z (2014) Characterization of in-situ alloyed and additively manufactured titanium aluminides. Metall Mater Trans B 45:2299–2303
Baufeld B, Biest OV, Gault R (2010) Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties. Mater Des 31:S106–S111
Wang F, Mei J, Wu X (2006) Microstructure study of direct laser fabricated Ti alloys using powder and wire. Appl Surf Sci 253:1424–1430
Mughal MP, Fawad H, Mufti R (2006) Finite element prediction of thermal stresses and deformations in layered manufacturing of metallic parts. Acta Mech 183:61–79
Brandl E, Schoberth A, Leyens C (2012) Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM). Mater Sci Eng A 532:295–307
Roberts IA, Wang CJ, Esterlein R, Stanford M, Mynors DJ (2009) A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing. Int J Mach Tools Manuf 49:916–923
Ding D, Pan Z, Cuiuri D, Li H (2014) A tool-path generation strategy for wire and arc additive manufacturing. Int J Adv Manuf Technol 73:173–183
Ma Y, Cuiuri D, Hoye N, Li H, Pan Z (2014) Effects of wire feed conditions on in situ alloying and additive layer manufacturing of titanium aluminides using gas tungsten arc welding. J Mater Res 29:2066–2071
Shen C, Pan Z, Ma Y, Cuiuri D, Li H (2015) Fabrication of iron-rich Fe–Al intermetallics using the wire-arc additive manufacturing process. Addit Manuf 7:20–26
Wang F, Williams S, Rush M (2011) Morphology investigation on direct current pulsed gas tungsten arc welded additive layer manufactured Ti6Al4V alloy. Int J Adv Manuf Technol 57:597–603
Sierra G, Peyre P, Deschaux Beaume F, Stuart D, Fras G (2008) Galvanised steel to aluminium joining by laser and GTAW processes. Mater Charact 59:1705–1715
Reed RC, Bhadeshia HKDH (1994) A simple model for multipass steel welds. Acta Metall Mater 42:3663–3678
Funderburk RS (1998) The importance of interpass temperature. Weld Innov 15:1–2
Hardy E (2009) Welding. New England Review (1990-) 30:123–137
Rokhlin SI, Guu AC (1993) A study of arc force, pool depression, and weld penetration during gas tungsten arc welding. Weld J (USA) 72:381
Wang H, Jiang W, Ouyang J, Kovacevic R (2004) Rapid prototyping of 4043 Al-alloy parts by VP-GTAW. J Mater Process Technol 148:93–102
Hoye N, Appel EC, Cuiuri D, Li H (2013) Characterisation of metal deposition during additive manufacturing of Ti-6Al-4V BY arc-wire methods. Twenty Forth Annual International Solid Freeform Fabrication Symposium 1015–1023
Fasching AA, Ash DI, Edwards GR, David SA (1995) Hydrogen cracking behavior in an iron aluminide alloy weldment. Scr Metall Mater 32:389–394
Liu Z, Gao W, Wang F (1998) Oxidation behaviour of FeAl intermetallic coatings produced by magnetron sputter deposition. Scripta Mater 39:1497–1502
Halfa H (2010) Oxidation behavior of Fe3Al-5Cr-(0, 0.5, 1.5) Ti alloys at temperature ranges from 800 to 1200 Celsius. J Miner Mater Charact Eng 9:775–786
Rudy M, Sauthoff G (1986) Dislocation creep in the ordered intermetallic (Fe, Ni)Al phase. Mater Sci Eng 81:525–530
Stallybrass C, Sauthoff G (2004) Ferritic Fe–Al–Ni–Cr alloys with coherent precipitates for high-temperature applications. Mater Sci Eng A 387:985–990
Hadef F, Otmani A, Djekoun A, Grenche JM (2011) Nanocrystalline FeAl intermetallics obtained in mechanically alloyed Fe50Al40Ni10 powder. Superlattice Microst 49:654–665
Liu CT, Inouye H (1979) Control of ordered structure and ductility of (Fe, Co, Ni)3V alloys. Metall Trans A 10:1515–1525
Liu CT (1984) Physical metallurgy and mechanical properties of ductile ordered alloys (Fe, Co, Ni)//3V. Int Met Rev 29:168–194
Liu CT, Stiegler JO (1984) Ductile ordered intermetallic alloys. Science 226:636–642
Liu CT, Koch CC, White CL (1983) Preparation of ductile nickel aluminides for high-temperature uses. Electrochem Soc Extend Abstr 83–1:687–688
Taub AI, Huang SC, Chang KM (1984) Improved strength and ductility of Ni 3 Al by boron modification and rapid solidification. Metall Mater Trans A 15:399–402
Neumann H, Moravec J, Bradac J (2010) TIG welding process effect on the iron aluminide Fe3Al. Metal 1–6
David SA, Horton JA, McKamey CG, Zacharia T, Reed RW (1989) Welding of iron aluminides. Weld J (Miami, Fla) 68:372s–381s
McKamey CG (1996) Physical metallurgy and processing of intermetallic compounds: iron aluminides. Springer, pp 351–391
Zacharia T, David SA (1991) Weldability of iron aluminides. Oak Ridge National Lab, TN
Goodwin GM, Maziasz PJ, McKamey CJ, DeVan JH, Sikka VK (1994) Weldability of iron aluminides. Oak Ridge National Lab, TN
Ma Y, Cuiuri D, Hoye N, Li H, Pan Z (2015) The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding. Mater Sci Eng A 631:230–240
Ma Y (2015) Fabrication of gamma titanium aluminide alloys by gas tungsten arc welding-based additive layer manufacturing. University of Wollongong, Wollongong
Ozaki H, Kutsuna M, Nakagawa S, Miyamoto K (2010) Laser roll welding of dissimilar metal joint of zinc coated steel to aluminum alloy. J Laser Appl 22:1–6
Bahadur A (2003) Enhancement of high temperature strength and room temperature ductility of iron aluminides by alloying. Mater Sci Technol 19:1627–1634
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shen, C., Pan, Z., Cuiuri, D. et al. Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process. Int J Adv Manuf Technol 88, 2009–2018 (2017). https://doi.org/10.1007/s00170-016-8935-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-8935-3