Abstract
The construction industry has relied heavily on wood and wood-based composites, such as oriented strand board (OSB) and plywood for timber frame construction. Therefore, it is highly imperative to categorize the response of wood-based composites when exposed to elevated temperatures for a sustained period of time. The essence of fire-resistant structural design is to ensure that structural integrity be maintained during and after the fire, prevent collapse and maintain means of egress. Another aspect is to assess post-fire structural integrity and residual strength of existing structure. The objective of this project was (a) to study the effect of exposure time on bending strength (MOR) of OSB and plywood at elevated temperatures, (b) to interpret any relationships between different temperature and time of exposure using a kinetics model for thermal degradation of strength, and (c) to develop a master curve representing temporal behavior of OSB and plywood at a reference temperature. As much as 1,152 samples were tested in static bending as a function of exposure time and several temperatures. Strength (MOR) of both OSB and plywood decreased as a function of temperature and exposure time. These results were fit to a simple kinetics model, based on the assumption of degradation kinetics following an Arrhenius activation energy model. The apparent activation energies for thermal degradation of strength were 54.1 kJ/mol for OSB and 62.8 kJ/mol for plywood. Furthermore, using the kinetics analysis along with time–temperature superposition, a master curve was generated at a reference temperature of 150°C which predicts degradation of strength with time on exposure at that reference temperature. The master curves show that although plywood has a higher initial strength, OSB performs better in terms of strength degradation after exposure to elevated temperature.
Similar content being viewed by others
References
Aklonis JJ, MacKnight WJ (1983) Introduction to polymer viscoelasticity, 2nd edn. Wiley, New York
American Society of Testing & Materials (ASTM) (2006) Standard test methods for structural panel in flexure. ASTM D 3043-00, West Conshohocken, PA
APA (1989a) Fire-retardant-treated plywood roof sheathing: field failures. American Plywood Association, Tacoma
APA (1989b) Fire-retardant-treated plywood roof sheathing: general information. American Plywood Association, Tacoma
APA (2005) APA Economics Report E171. American Plywood Association, Tacoma
Beall FC, Eickner HW (1970) Thermal degradation of wood components: a literature review. Research Paper FPL-RP-130. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. Madison, WI
Bekhta P, Lecka J, Morze Z (2003) Short-term effect of the temperature on the bending strength of wood-based panels. Holz Roh-Werkst 61(2003):423–424
Cramer SM, White RH (1997) Fire performance issues. Wood engineering in the 21st century: research needs and goals: proc. In: Workshop offered in conjunction with SEI/ASCE structures congress XV, Portland, OR, pp 75–86
Gao M, Sun CY, Wang CX (2006) Thermal degradation of wood treated with flame retardants. J Therm Anal Calorim 85(3):765–769
Gerhards CC (1982) Effect of moisture content and temperature on mechanical properties of wood: an analysis of immediate effects. Wood Fibre 14(1):4–36
Green DW, Winandy JE, Kretschmann DE (1999) Wood handbook-wood as an engineering material. General technical report FPL-GTR-113, U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI
Grundahl K (1992) National engineered lightweight construction fire research project. In: Technical report: literature search and technical analysis. National Fire Protection Research Foundation, Quincy, MA, USA
Millett MA, Gerhards CC (1972) Accelerated aging: residual weight and flexural properties of wood heated in air at 115 to 175°C. Wood Sci 4(4):193–201
Mitchell RL, Seborg RM, Millett MA (1953) Effect of heat on the properties and chemical composition of Douglas-fir wood and its major components. For Prod J 3(11):38–42
Schaffer EL (1970) Elevated temperature effect on the longitudinal mechanical properties of wood. Ph.D. Thesis, Department of Mechanical Engineering, University of Wisconsin, Madison, WI, USA
Stamm AJ (1964) Wood and cellulose science. Ronald Press, New York, pp 308–311
White RH, Winandy JE (2006) Fire performance of oriented strandboard. In: Proceedings of seventeenth annual BCC conference on flame retardancy, Norwalk, CT, USA, pp 297–309
Winandy JE, Lebow PK (1996) Kinetics models for thermal degradation of strength of fire-retardant treated wood. Wood Fiber Sci 28(1):39–52
Winandy JE, LeVan SL, Schaffer EL, Lee PW (1988) Effect of fire-retardant treatment and redrying on the mechanical properties of Douglas-fir and aspen plywood. In: Research paper FPL-RP 485. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI
Winandy JE, LeVan SL, Ross RJ, Hoffman SP, McIntyre CR (1991) Thermal degradation of fire-retardant-treated plywood: development and evaluation of test protocol. In: Research paper FPL-RP 501. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. Madison, WI
Acknowledgments
The author would like to acknowledge the support of the Wood based Composite Center for funding the project.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sinha, A., Nairn, J.A. & Gupta, R. Thermal degradation of bending strength of plywood and oriented strand board: a kinetics approach. Wood Sci Technol 45, 315–330 (2011). https://doi.org/10.1007/s00226-010-0329-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00226-010-0329-3