Abstract
Agars with different performance in bioassays were analysed for physical and chemical properties. Agars with the highest gel strength had the best performance. Good performance was also related to a low pH of a suspension of agars and to a low sulphur content. The diffusion rate of ions in gels differed between agars, but could not explain differences in agar performance. The time of autoclaving had a marked effect on the gel strength, however, without affecting the performance. Chemical analysis revealed large differences between agars. The best agars had a relatively low salt content. One of the best agars had an extremely high content of trace elements. Agar impurities, especially of the trace elements were tightly bound to the agars. Up to 30% of the Murashige and Skoog (MS) salts were also immobilized in the gel. At pH 4.2, less nitrogen and phosphate were available from the MS medium than at pH 5.7. Chlorine could be washed out completely and appeared to be a good marker for agar quality and purity. With AgNO3, chlorine contamination could easily be visualized.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 28 April 1996 / Revision received: 15 December 1996 / Accepted: 20 January 1997
Rights and permissions
About this article
Cite this article
Scholten, H., Pierik, R. Agar as a gelling agent: chemical and physical analysis. Plant Cell Reports 17, 230–235 (1998). https://doi.org/10.1007/s002990050384
Issue Date:
DOI: https://doi.org/10.1007/s002990050384